✕
Find the best tutors and institutes for Class 12 Tuition
Find Best Class 12 Tuition
Q4.35(i):
Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (i) electronic configurations
Solution :
Step 1: Theoretical Foundation of Transition Metal Series
The transition elements are arranged in four series: $3d$, $4d$, $5d$, and $6d$, corresponding to the filling of the respective $d$-orbitals. When comparing the first ($3d$) transition series ($Sc$ to $Zn$) with the second ($4d$) ($Y$ to $Cd$) and third ($5d$) ($La, Hf$ to $Hg$) series in vertical columns (groups), the electronic configurations demonstrate periodic trends influenced by increased nuclear charge, shielding effects, and relativistic effects.
Step 2: Analysis of Electronic Configurations
The general valence shell electronic configuration for transition metals is $(n-1)d^{1-10}ns^{1-2}$. While elements within a group share the same number of valence electrons, their specific ground-state configurations deviate due to the stability of half-filled or fully filled $d$-orbitals and the energy gap between $ns$ and $(n-1)d$ subshells.
| Group | 1st Series ($3d$) | 2nd Series ($4d$) | 3rd Series ($5d$) |
|---|---|---|---|
| Group 6 (Cr-subgroup) | $[Ar]3d^5 4s^1$ | $[Kr]4d^5 5s^1$ | $[Xe]4f^{14} 5d^5 6s^1$ |
| Group 10 (Ni-subgroup) | $[Ar]3d^8 4s^2$ | $[Kr]4d^8 5s^2$ | $[Xe]4f^{14} 5d^9 6s^1$ |
| Group 11 (Cu-subgroup) | $[Ar]3d^{10} 4s^1$ | $[Kr]4d^{10} 5s^1$ | $[Xe]4f^{14} 5d^{10} 6s^1$ |
Step 3: Comparative Observations and Periodic Justifications
- Structural Consistency: In most vertical columns, the number of electrons in the outer $ns$ orbital remains generally consistent, typically $ns^2$ or $ns^1$ [Per the Aufbau Principle and exchange energy considerations].
- The Lanthanoid Contraction Influence: A defining characteristic of the $5d$ series is the presence of a completely filled $4f^{14}$ subshell. Due to the poor shielding effect of $f$-electrons [Per Slater’s Rules], the effective nuclear charge increases, leading to the "lanthanoid contraction." This results in the $5d$ orbitals being more spatially compact and lower in energy compared to $4d$ orbitals.
- Configurational Anomalies: While $3d$ and $4d$ series follow relatively predictable patterns, $5d$ series elements often show deeper participation of $d$-electrons in bonding, and occasionally, the $ns$ electron is promoted to the $(n-1)d$ level to achieve a more stable configuration ($d^{10}$ or $d^5$ states), as observed in $Pt$ ($5d^9 6s^1$) vs $Ni$ ($3d^8 4s^2$).
Final Solution: While all three transition series follow the general configuration $(n-1)d^{1-10}ns^{1-2}$, the $3d$ and $4d$ series are chemically analogous in their valence shell occupancy. The $5d$ series is distinctly marked by the addition of the $4f^{14}$ subshell, which subjects the $5d$ electrons to higher effective nuclear charge, causing them to be more tightly bound and energetically distinct from the preceding $4d$ series.
More Questions from Class 12 Chemistry The d- and f-Block Elements Exercises
- Q4.1 (i): Write down the electronic configuration of: (i) Cr^{3+}
- Q4.1 (ii): Write down the electronic configuration of: (ii) Pm^{3+}
- Q4.1 (iii): Write down the electronic configuration of: (iii) Cu^{+}
- Q4.1 (iv): Write down the electronic configuration of: (iv) Ce^{4+}
- Q4.1 (v): Write down the electronic configuration of: (v) Co^{2+}
- Q4.1 (vi): Write down the electronic configuration of: (vi) Lu^{2+}
- Q4.1 (vii): Write down the electronic configuration of: (vii) Mn^{2+}
- Q4.1 (viii): Write down the electronic configuration of: (viii) Th^{4+}
- Q4.1(i): Write down the electronic configuration of: (i) \(Cr^{3+}\)
- Q4.1(ii): Write down the electronic configuration of: (ii) \(Pm^{3+}\)
- Q4.1(iii): Write down the electronic configuration of: (iii) \(Cu^{+}\)
- Q4.1(iv): Write down the electronic configuration of: (iv) \(Ce^{4+}\)
- Q4.1(v): Write down the electronic configuration of: (v) \(Co^{2+}\)
- Q4.1(vi): Write down the electronic configuration of: (vi) \(Lu^{2+}\)
- Q4.1(vii): Write down the electronic configuration of: (vii) \(Mn^{2+}\)
- Q4.1(viii): Write down the electronic configuration of: (viii) \(Th^{4+}\)
- Q4.10: What are the different oxidation states exhibited by the lanthanoids?
- Q4.10: What are the different oxidation states exhibited by the lanthanoids?
- Q4.11 (i): Explain giving reasons: (i) Transition metals and many of their compounds show paramagnetic behaviour.
- Q4.11 (ii): Explain giving reasons: (ii) The enthalpies of atomisation of the transition metals are high.
- Q4.11 (iii): Explain giving reasons: (iii) The transition metals generally form coloured compounds.
- Q4.11 (iv): Explain giving reasons: (iv) Transition metals and their many compounds act as good catalyst.
- Q4.11(i): Explain giving reasons: (i) Transition metals and many of their compounds show paramagnetic behaviour.
- Q4.11(ii): Explain giving reasons: (ii) The enthalpies of atomisation of the transition metals are high.
- Q4.11(iii): Explain giving reasons: (iii) The transition metals generally form coloured compounds.
- Q4.11(iv): Explain giving reasons: (iv) Transition metals and their many compounds act as good catalyst.
- Q4.12: What are interstitial compounds? Why are such compounds well known for transition metals?
- Q4.12: What are interstitial compounds? Why are such compounds well known for transition metals?
- Q4.13: How is the variability in oxidation states of transition metals different from that of the non transition metals? Illustrate with examples.
- Q4.13: How is the variability in oxidation states of transition metals different from that of the non transition metals? Illustrate with examples.
- Q4.14: Describe the preparation of potassium dichromate from iron chromite ore. What is the effect of increasing pH on a solution of potassium dichromate?
- Q4.14: Describe the preparation of potassium dichromate from iron chromite ore. What is the effect of increasing pH on a solution of potassium dichromate?
- Q4.15 (i): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (i) iodide
- Q4.15 (ii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (ii) iron(II) solution and
- Q4.15 (iii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (iii) H_{2}S
- Q4.15(i): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (i) iodide
- Q4.15(ii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (ii) iron(II) solution
- Q4.15(iii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (iii) \(H_{2}S\)
- Q4.16: Describe the preparation of potassium permanganate. How does the acidified permanganate solution react with (i) iron(II) ions (ii) \(SO_{2}\) and (iii) oxalic acid? Write the ionic equations for the reactions.
- Q4.16: Describe the preparation of potassium permanganate. How does the acidified permanganate solution react with (i) iron(II) ions (ii) SO_{2} and (iii) oxalic acid? Write the ionic equations for the reactions.
- Q4.17: For M^{2+}/M and M^{3+}/M^{2+} systems the E^{o} values for some metals are as follows: Use this data to comment upon: (i) the stability of Fe^{3+} in acid solution as compared to that of Cr^{3+} or Mn^{3+} and (ii) the ease with which iron can be oxidised as compared to a similar process for either chromium or manganese metal.
- Q4.17(i): For \(M^{2+}/M\) and \(M^{3+}/M^{2+}\) systems the \(E^{o}\) values for some metals are as follows: (i) the stability of \(Fe^{3+}\) in acid solution as compared to that of \(Cr^{3+}\) or \(Mn^{3+}\)
- Q4.17(ii): For \(M^{2+}/M\) and \(M^{3+}/M^{2+}\) systems the \(E^{o}\) values for some metals are as follows: Use this data to comment upon: (ii) the ease with which iron can be oxidised as compared to a similar process for either chromium or manganese metal.
- Q4.18: Predict which of the following will be coloured in aqueous solution? \(Ti^{3+}\), \(V^{3+}\), \(Cu^{+}\), \(Sc^{3+}\), \(Mn^{2+}\), \(Fe^{3+}\) and \(Co^{2+}\). Give reasons for each.
- Q4.18: Predict which of the following will be coloured in aqueous solution? Ti^{3+}, V^{3+}, Cu^{+}, Sc^{3+}, Mn^{2+}, Fe^{3+} and Co^{2+}. Give reasons for each.
- Q4.19: Compare the stability of +2 oxidation state for the elements of the first transition series.
- Q4.19: Compare the stability of +2 oxidation state for the elements of the first transition series.
- Q4.2: Why are \(Mn^{2+}\) compounds more stable than \(Fe^{2+}\) towards oxidation to their +3 state?
- Q4.2: Why are Mn^{2+} compounds more stable than Fe^{2+} towards oxidation to their +3 state?
- Q4.20 (i): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (i) electronic configuration
- Q4.20 (ii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (ii) atomic and ionic sizes and
- Q4.20 (iii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iii) oxidation state
- Q4.20 (iv): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iv) chemical reactivity.
- Q4.20(i): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (i) electronic configuration
- Q4.20(ii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (ii) atomic and ionic sizes
- Q4.20(iii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iii) oxidation state
- Q4.20(iv): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iv) chemical reactivity.
- Q4.21 (i): How would you account for the following: (i) Of the d^{4} species, Cr^{2+} is strongly reducing while manganese(III) is strongly oxidising.
- Q4.21 (ii): How would you account for the following: (ii) Cobalt(II) is stable in aqueous solution but in the presence of complexing reagents it is easily oxidised.
- Q4.21 (iii): How would you account for the following: (iii) The d^{1} configuration is very unstable in ions.
- Q4.21(i): How would you account for the following: (i) Of the \(d^{4}\) species, \(Cr^{2+}\) is strongly reducing while manganese(III) is strongly oxidising.
- Q4.21(ii): How would you account for the following: (ii) Cobalt(II) is stable in aqueous solution but in the presence of complexing reagents it is easily oxidised.
- Q4.21(iii): How would you account for the following: (iii) The \(d^{1}\) configuration is very unstable in ions.
- Q4.22: What is meant by ‘disproportionation’? Give two examples of disproportionation reaction in aqueous solution.
- Q4.22: What is meant by ‘disproportionation’? Give two examples of disproportionation reaction in aqueous solution.
- Q4.23: Which metal in the first series of transition metals exhibits +1 oxidation state most frequently and why?
- Q4.23: Which metal in the first series of transition metals exhibits +1 oxidation state most frequently and why?
- Q4.24: Calculate the number of unpaired electrons in the following gaseous ions: \(Mn^{3+}\), \(Cr^{3+}\), \(V^{3+}\) and \(Ti^{3+}\). Which one of these is the most stable in aqueous solution?
- Q4.24: Calculate the number of unpaired electrons in the following gaseous ions: Mn^{3+}, Cr^{3+}, V^{3+} and Ti^{3+}. Which one of these is the most stable in aqueous solution?
- Q4.25 (i): Give examples and suggest reasons for the following features of the transition metal chemistry: (i) The lowest oxide of transition metal is basic, the highest is amphoteric/acidic.
- Q4.25 (ii): Give examples and suggest reasons for the following features of the transition metal chemistry: (ii) A transition metal exhibits highest oxidation state in oxides and fluorides.
- Q4.25 (iii): Give examples and suggest reasons for the following features of the transition metal chemistry: (iii) The highest oxidation state is exhibited in oxoanions of a metal.
- Q4.25(i): Give examples and suggest reasons for the following features of the transition metal chemistry: (i) The lowest oxide of transition metal is basic, the highest is amphoteric/acidic.
- Q4.25(ii): Give examples and suggest reasons for the following features of the transition metal chemistry: (ii) A transition metal exhibits highest oxidation state in oxides and fluorides.
- Q4.25(iii): Give examples and suggest reasons for the following features of the transition metal chemistry: (iii) The highest oxidation state is exhibited in oxoanions of a metal.
- Q4.26 (i): Indicate the steps in the preparation of: (i) K_{2}Cr_{2}O_{7} from chromite ore.
- Q4.26 (ii): Indicate the steps in the preparation of: (ii) KMnO_{4} from pyrolusite ore.
- Q4.26(i): Indicate the steps in the preparation of: (i) \(K_{2}Cr_{2}O_{7}\) from chromite ore.
- Q4.26(ii): Indicate the steps in the preparation of: (ii) \(KMnO_{4}\) from pyrolusite ore.
- Q4.27: What are alloys? Name an important alloy which contains some of the lanthanoid metals. Mention its uses.
- Q4.27: What are alloys? Name an important alloy which contains some of the lanthanoid metals. Mention its uses.
- Q4.28: What are inner transition elements? Decide which of the following atomic numbers are the atomic numbers of the inner transition elements : 29, 59, 74, 95, 102, 104.
- Q4.28: What are inner transition elements? Decide which of the following atomic numbers are the atomic numbers of the inner transition elements : 29, 59, 74, 95, 102, 104.
- Q4.29: The chemistry of the actinoid elements is not so smooth as that of the lanthanoids. Justify this statement by giving some examples from the oxidation state of these elements.
- Q4.29: The chemistry of the actinoid elements is not so smooth as that of the lanthanoids. Justify this statement by giving some examples from the oxidation state of these elements.
- Q4.3: Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
- Q4.3: Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
- Q4.30: Which is the last element in the series of the actinoids? Write the electronic configuration of this element. Comment on the possible oxidation state of this element.
- Q4.30: Which is the last element in the series of the actinoids? Write the electronic configuration of this element. Comment on the possible oxidation state of this element.
- Q4.31: Use Hund’s rule to derive the electronic configuration of \(Ce^{3+}\) ion, and calculate its magnetic moment on the basis of ‘spin-only’ formula.
- Q4.31: Use Hund’s rule to derive the electronic configuration of Ce^{3+} ion, and calculate its magnetic moment on the basis of ‘spin-only’ formula.
- Q4.32: Name the members of the lanthanoid series which exhibit +4 oxidation states and those which exhibit +2 oxidation states. Try to correlate this type of behaviour with the electronic configurations of these elements.
- Q4.32: Name the members of the lanthanoid series which exhibit +4 oxidation states and those which exhibit +2 oxidation states. Try to correlate this type of behaviour with the electronic configurations of these elements.
- Q4.33 (i): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (i) electronic configuration
- Q4.33 (ii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (ii) oxidation states and
- Q4.33 (iii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (iii) chemical reactivity.
- Q4.33(i): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (i) electronic configuration
- Q4.33(ii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (ii) oxidation states
- Q4.33(iii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (iii) chemical reactivity.
- Q4.34: Write the electronic configurations of the elements with the atomic numbers 61, 91, 101, and 109.
- Q4.34: Write the electronic configurations of the elements with the atomic numbers 61, 91, 101, and 109.
- Q4.35 (i): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (i) electronic configurations
- Q4.35 (ii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (ii) oxidation states
- Q4.35 (iii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iii) ionisation enthalpies
- Q4.35 (iv): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iv) atomic sizes.
- Q4.35(ii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (ii) oxidation states
- Q4.35(iii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iii) ionisation enthalpies
- Q4.35(iv): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iv) atomic sizes.
- Q4.36: Write down the number of 3d electrons in each of the following ions: \(Ti^{2+}\), \(V^{2+}\), \(Cr^{3+}\), \(Mn^{2+}\), \(Fe^{2+}\), \(Fe^{3+}\), \(Co^{2+}\), \(Ni^{2+}\) and \(Cu^{2+}\). Indicate how would you expect the five 3d orbitals to be occupied for these hydrated ions (octahedral).
- Q4.36: Write down the number of 3d electrons in each of the following ions: Ti^{2+}, V^{2+}, Cr^{3+}, Mn^{2+}, Fe^{2+}, Fe^{3+}, Co^{2+}, Ni^{2+} and Cu^{2+}. Indicate how would you expect the five 3d orbitals to be occupied for these hydrated ions (octahedral).
- Q4.37: Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.
- Q4.37: Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.
- Q4.38: What can be inferred from the magnetic moment values of the following complex species ?
- Q4.38: What can be inferred from the magnetic moment values of the following complex species ?
- Q4.4: To what extent do the electronic configurations decide the stability of oxidation states in the first series of the transition elements? Illustrate your answer with examples.
- Q4.4: To what extent do the electronic configurations decide the stability of oxidation states in the first series of the transition elements? Illustrate your answer with examples.
- Q4.5: What may be the stable oxidation state of the transition element with the following d electron configurations in the ground state of their atoms : \(3d^{3}\), \(3d^{5}\), \(3d^{8}\) and \(3d^{4}\)?
- Q4.5: What may be the stable oxidation state of the transition element with the following d electron configurations in the ground state of their atoms : 3d^{3}, 3d^{5}, 3d^{8} and 3d^{4}?
- Q4.6: Name the oxometal anions of the first series of the transition metals in which the metal exhibits the oxidation state equal to its group number.
- Q4.6: Name the oxometal anions of the first series of the transition metals in which the metal exhibits the oxidation state equal to its group number.
- Q4.7: What is lanthanoid contraction? What are the consequences of lanthanoid contraction?
- Q4.7: What is lanthanoid contraction? What are the consequences of lanthanoid contraction?
- Q4.8: What are the characteristics of the transition elements and why are they called transition elements? Which of the d-block elements may not be regarded as the transition elements?
- Q4.8: What are the characteristics of the transition elements and why are they called transition elements? Which of the d-block elements may not be regarded as the transition elements?
- Q4.9: In what way is the electronic configuration of the transition elements different from that of the non transition elements?
- Q4.9: In what way is the electronic configuration of the transition elements different from that of the non transition elements?
CBSE Solutions for Class 12 Chemistry The d- and f-Block Elements
Chapters in CBSE - Class 12 Chemistry
Top Tutors who teach The d- and f-Block Elements
(44)
Top Tutor
HSR Layout 1st Sector, Bangalore
11 yrs of
Exp
25 students
2027 hrs of classes completed
400
per hour
Magic maths class for students
Student's Home
I am a B.TECH. graduate from computer science.I am completely dedicated in teaching .I have experience of 10 years in teaching field. In that 10 years, I have taught 180 students(1 on 1)as a tutor.I have experience of teaching all types of boards like (CBSE,ICSE,IGCSE, ISC,STATE BOARD,IB) .My specialisation is in mathematics subject.I teach mathematics from 7th grade to 12th grade.I keep patience while teaching to the students,I try my best to clear the concepts regarding that chapter either in maths.Student can ask their doubts many times until their concepts is not clear.I have given good results to the students and also generated confidence in them specially in mathematics. I am the best for teaching maths subject. I first try to understand the student ( weakness and strength) and then I plan how to make any student best in math. I teach with full dedication and create interest for maths subject in my students. Thanks.
Akshith Sitaram
I wanted to express my gratitude for your exceptional guidance in math tuition. Your teaching style is not only informative but also engaging, making complex concepts seem much simpler. Your patience and willingness to go the extra mile to ensure I understand each topic are truly commendable. Thanks to your support, my confidence in math has soared, and my grades have improved significantly. Your dedication to your students' success is inspiring. I'm truly fortunate to have you as my math tutor, and I look forward to continuing to learn from you. Thank you for making math enjoyable!
Skills:
Mathematics
Also teaches:
BTech Tuition, BCom Tuition
and more
(11)
Top Tutor
Karolan Ka Barh, Jaipur
10 yrs of
Exp
2 students
71 hrs of classes completed
700
per hour
Experience of 20 years in teaching
Online Classes
Tutor's home
With 12 years of dedicated teaching experience, I have consistently aimed to deliver high-quality education in the field of Commerce and related subjects. Holding a B.Com, M.Com, and B.Ed, along with being UGC NET qualified, I have taught at various academic levels, ensuring conceptual clarity and practical understanding for students. My teaching approach emphasizes student engagement, real-life applications of theoretical knowledge, and consistent academic growth. I have successfully prepared students for board exams and competitive assessments, fostering both academic excellence and confidence. Throughout my career, I have remained committed to continuous learning and adapting to modern teaching methodologies.
Kashmira Jat
Make complex topics easy to grasp and encourage the students and help in learning with such patient.
Skills:
Accountancy
,
Business Studies
and more
Also teaches:
Class 11 Tuition, Hindi Language
and more
(12)
Top Tutor
Sector 134, Noida
11 yrs of
Exp
4 students
120 hrs of classes completed
1000
per hour
MCA with 11 years exp in Computers teaching subject.
Online Classes
Tutor's home
I am teaching class 12 since 2006.it is being wonderful journey, I learnt and even still learning my new amazing things. Dealing with amazing children with different levels of challenges. love to solve these challenges and keep falling in love with coding to children. They say, " You're a amazing teacher who get make logic and critical thinking level easier."
Priyanshi
Very nice teacher. Helps in understanding every concept. Doubt clearing is also good. Satisfied.
Skills:
Computer Science
,
Information Technology
and more
Also teaches:
Class 11 Tuition, Class 10 Tuition
and more
(39)
Top Tutor
HSR Layout, Bangalore
6 yrs of
Exp
1 student
850
per hour
Class 12 Physics Tutor with 6 years expedience
Online Classes
Student's Home
Tutor's home
I have started tutoring from my fist year of engineering. I have given classes in coaching centers for those who prepare for AIEEE and IIT keep. I have scored 97 percent in PUC and 1353 rank in engineering in first attempt. I have given classes for engineering students too.
Skills:
Mathematics
,
Physics
and more
Also teaches:
Class 11 Tuition, Class 8 Tuition
and more
(12)
Top Tutor
Gadarpur, Gadarpur
5 yrs of
Exp
6 students
144 hrs of classes completed
500
per hour
Happy to help the learners !!
Online Classes
I am a teacher with 7 years of experience in teaching Accountancy at school (ISC & CBSE). I have completed my graduation (Bcom) from Kurukshetra University and Post Graduation (Mcom) from IGNOU with a diploma in International Business Operations.
Raksha Agrawal
Explains everything as many times as you ask for. solves question with you properly and also adjust with timing.
Skills:
Accounts
,
Accountancy
Also teaches:
Class 11 Tuition
×
Other Subjects in CBSE - Class 12
Download free CBSE - Class 12 Chemistry The d- and f-Block Elements Exercises worksheets
Download Now
