Find the best tutors and institutes for Class 12 Tuition
Q4.33 (iii):
Compare the chemistry of the actinoids with that of lanthanoids with reference to: (iii) chemical reactivity.
Solution :
Step 1: Theoretical Foundation of Chemical Reactivity
The chemical reactivity of lanthanoids ($Ln$) and actinoids ($An$) is governed primarily by their electronic configuration and the effective nuclear charge. In both series, the elements exhibit electropositive character and high reactivity, similar to calcium. However, the intensity of this reactivity differs due to the spatial distribution of $4f$ versus $5f$ orbitals.
Step 2: Comparison of Reactivity Profiles
The chemical reactivity is analyzed across four fundamental parameters: oxidation kinetics, formation of compounds, basicity, and metallic nature.
| Parameter | Lanthanoids ($4f$) | Actinoids ($5f$) |
|---|---|---|
| General Reactivity | Highly reactive, similar to alkaline earth metals. | Highly reactive; significantly more reactive than lanthanoids due to lower ionization enthalpy. |
| Oxidation Kinetics | React slowly with water and acids to liberate $H_2$. | React more vigorously; show higher affinity for non-metals (e.g., $S, P, C, H$). |
| Compound Formation | Form primarily trivalent ($+3$) compounds. | Exhibit a wide range of oxidation states ($+3, +4, +5, +6, +7$). |
Step 3: Analytical Justification of Differences
- Ionization Enthalpy: The $5f$ electrons of actinoids are less effectively shielded than the $4f$ electrons of lanthanoids [Per the Shielding Effect Theory]. Consequently, the outer electrons in actinoids are held less tightly by the nucleus, leading to lower ionization enthalpies and, inherently, greater chemical reactivity.
- Oxidation States: The energy gap between $5f, 6d,$ and $7s$ subshells in actinoids is small. This allows for a greater variety of oxidation states compared to the lanthanoids, where $4f$ is deeply buried and less available for chemical bonding [By Hund's Rule and Aufbau Principle].
- Formation of Non-metal Compounds: Actinoids combine directly with non-metals at moderate temperatures, exhibiting a reactivity pattern that facilitates the formation of a broader spectrum of binary compounds (e.g., carbides, hydrides, and sulfides) compared to their lanthanoid counterparts.
Step 4: Visualizing Orbital Penetration and Reactivity
Final Solution: Actinoids are significantly more reactive than lanthanoids. This is primarily attributed to the lower ionization enthalpy of actinoids caused by the poor shielding of the $5f$ electrons, which facilitates a greater degree of electronic participation in bonding and a wider range of available oxidation states compared to the $4f$ series.
More Questions from Class 12 Chemistry The d- and f-Block Elements Exercises
- Q4.1 (i): Write down the electronic configuration of: (i) Cr^{3+}
- Q4.1 (ii): Write down the electronic configuration of: (ii) Pm^{3+}
- Q4.1 (iii): Write down the electronic configuration of: (iii) Cu^{+}
- Q4.1 (iv): Write down the electronic configuration of: (iv) Ce^{4+}
- Q4.1 (v): Write down the electronic configuration of: (v) Co^{2+}
- Q4.1 (vi): Write down the electronic configuration of: (vi) Lu^{2+}
- Q4.1 (vii): Write down the electronic configuration of: (vii) Mn^{2+}
- Q4.1 (viii): Write down the electronic configuration of: (viii) Th^{4+}
- Q4.1(i): Write down the electronic configuration of: (i) \(Cr^{3+}\)
- Q4.1(ii): Write down the electronic configuration of: (ii) \(Pm^{3+}\)
- Q4.1(iii): Write down the electronic configuration of: (iii) \(Cu^{+}\)
- Q4.1(iv): Write down the electronic configuration of: (iv) \(Ce^{4+}\)
- Q4.1(v): Write down the electronic configuration of: (v) \(Co^{2+}\)
- Q4.1(vi): Write down the electronic configuration of: (vi) \(Lu^{2+}\)
- Q4.1(vii): Write down the electronic configuration of: (vii) \(Mn^{2+}\)
- Q4.1(viii): Write down the electronic configuration of: (viii) \(Th^{4+}\)
- Q4.10: What are the different oxidation states exhibited by the lanthanoids?
- Q4.10: What are the different oxidation states exhibited by the lanthanoids?
- Q4.11 (i): Explain giving reasons: (i) Transition metals and many of their compounds show paramagnetic behaviour.
- Q4.11 (ii): Explain giving reasons: (ii) The enthalpies of atomisation of the transition metals are high.
- Q4.11 (iii): Explain giving reasons: (iii) The transition metals generally form coloured compounds.
- Q4.11 (iv): Explain giving reasons: (iv) Transition metals and their many compounds act as good catalyst.
- Q4.11(i): Explain giving reasons: (i) Transition metals and many of their compounds show paramagnetic behaviour.
- Q4.11(ii): Explain giving reasons: (ii) The enthalpies of atomisation of the transition metals are high.
- Q4.11(iii): Explain giving reasons: (iii) The transition metals generally form coloured compounds.
- Q4.11(iv): Explain giving reasons: (iv) Transition metals and their many compounds act as good catalyst.
- Q4.12: What are interstitial compounds? Why are such compounds well known for transition metals?
- Q4.12: What are interstitial compounds? Why are such compounds well known for transition metals?
- Q4.13: How is the variability in oxidation states of transition metals different from that of the non transition metals? Illustrate with examples.
- Q4.13: How is the variability in oxidation states of transition metals different from that of the non transition metals? Illustrate with examples.
- Q4.14: Describe the preparation of potassium dichromate from iron chromite ore. What is the effect of increasing pH on a solution of potassium dichromate?
- Q4.14: Describe the preparation of potassium dichromate from iron chromite ore. What is the effect of increasing pH on a solution of potassium dichromate?
- Q4.15 (i): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (i) iodide
- Q4.15 (ii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (ii) iron(II) solution and
- Q4.15 (iii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (iii) H_{2}S
- Q4.15(i): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (i) iodide
- Q4.15(ii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (ii) iron(II) solution
- Q4.15(iii): Describe the oxidising action of potassium dichromate and write the ionic equations for its reaction with: (iii) \(H_{2}S\)
- Q4.16: Describe the preparation of potassium permanganate. How does the acidified permanganate solution react with (i) iron(II) ions (ii) \(SO_{2}\) and (iii) oxalic acid? Write the ionic equations for the reactions.
- Q4.16: Describe the preparation of potassium permanganate. How does the acidified permanganate solution react with (i) iron(II) ions (ii) SO_{2} and (iii) oxalic acid? Write the ionic equations for the reactions.
- Q4.17: For M^{2+}/M and M^{3+}/M^{2+} systems the E^{o} values for some metals are as follows: Use this data to comment upon: (i) the stability of Fe^{3+} in acid solution as compared to that of Cr^{3+} or Mn^{3+} and (ii) the ease with which iron can be oxidised as compared to a similar process for either chromium or manganese metal.
- Q4.17(i): For \(M^{2+}/M\) and \(M^{3+}/M^{2+}\) systems the \(E^{o}\) values for some metals are as follows: (i) the stability of \(Fe^{3+}\) in acid solution as compared to that of \(Cr^{3+}\) or \(Mn^{3+}\)
- Q4.17(ii): For \(M^{2+}/M\) and \(M^{3+}/M^{2+}\) systems the \(E^{o}\) values for some metals are as follows: Use this data to comment upon: (ii) the ease with which iron can be oxidised as compared to a similar process for either chromium or manganese metal.
- Q4.18: Predict which of the following will be coloured in aqueous solution? \(Ti^{3+}\), \(V^{3+}\), \(Cu^{+}\), \(Sc^{3+}\), \(Mn^{2+}\), \(Fe^{3+}\) and \(Co^{2+}\). Give reasons for each.
- Q4.18: Predict which of the following will be coloured in aqueous solution? Ti^{3+}, V^{3+}, Cu^{+}, Sc^{3+}, Mn^{2+}, Fe^{3+} and Co^{2+}. Give reasons for each.
- Q4.19: Compare the stability of +2 oxidation state for the elements of the first transition series.
- Q4.19: Compare the stability of +2 oxidation state for the elements of the first transition series.
- Q4.2: Why are \(Mn^{2+}\) compounds more stable than \(Fe^{2+}\) towards oxidation to their +3 state?
- Q4.2: Why are Mn^{2+} compounds more stable than Fe^{2+} towards oxidation to their +3 state?
- Q4.20 (i): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (i) electronic configuration
- Q4.20 (ii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (ii) atomic and ionic sizes and
- Q4.20 (iii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iii) oxidation state
- Q4.20 (iv): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iv) chemical reactivity.
- Q4.20(i): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (i) electronic configuration
- Q4.20(ii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (ii) atomic and ionic sizes
- Q4.20(iii): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iii) oxidation state
- Q4.20(iv): Compare the chemistry of actinoids with that of the lanthanoids with special reference to: (iv) chemical reactivity.
- Q4.21 (i): How would you account for the following: (i) Of the d^{4} species, Cr^{2+} is strongly reducing while manganese(III) is strongly oxidising.
- Q4.21 (ii): How would you account for the following: (ii) Cobalt(II) is stable in aqueous solution but in the presence of complexing reagents it is easily oxidised.
- Q4.21 (iii): How would you account for the following: (iii) The d^{1} configuration is very unstable in ions.
- Q4.21(i): How would you account for the following: (i) Of the \(d^{4}\) species, \(Cr^{2+}\) is strongly reducing while manganese(III) is strongly oxidising.
- Q4.21(ii): How would you account for the following: (ii) Cobalt(II) is stable in aqueous solution but in the presence of complexing reagents it is easily oxidised.
- Q4.21(iii): How would you account for the following: (iii) The \(d^{1}\) configuration is very unstable in ions.
- Q4.22: What is meant by ‘disproportionation’? Give two examples of disproportionation reaction in aqueous solution.
- Q4.22: What is meant by ‘disproportionation’? Give two examples of disproportionation reaction in aqueous solution.
- Q4.23: Which metal in the first series of transition metals exhibits +1 oxidation state most frequently and why?
- Q4.23: Which metal in the first series of transition metals exhibits +1 oxidation state most frequently and why?
- Q4.24: Calculate the number of unpaired electrons in the following gaseous ions: \(Mn^{3+}\), \(Cr^{3+}\), \(V^{3+}\) and \(Ti^{3+}\). Which one of these is the most stable in aqueous solution?
- Q4.24: Calculate the number of unpaired electrons in the following gaseous ions: Mn^{3+}, Cr^{3+}, V^{3+} and Ti^{3+}. Which one of these is the most stable in aqueous solution?
- Q4.25 (i): Give examples and suggest reasons for the following features of the transition metal chemistry: (i) The lowest oxide of transition metal is basic, the highest is amphoteric/acidic.
- Q4.25 (ii): Give examples and suggest reasons for the following features of the transition metal chemistry: (ii) A transition metal exhibits highest oxidation state in oxides and fluorides.
- Q4.25 (iii): Give examples and suggest reasons for the following features of the transition metal chemistry: (iii) The highest oxidation state is exhibited in oxoanions of a metal.
- Q4.25(i): Give examples and suggest reasons for the following features of the transition metal chemistry: (i) The lowest oxide of transition metal is basic, the highest is amphoteric/acidic.
- Q4.25(ii): Give examples and suggest reasons for the following features of the transition metal chemistry: (ii) A transition metal exhibits highest oxidation state in oxides and fluorides.
- Q4.25(iii): Give examples and suggest reasons for the following features of the transition metal chemistry: (iii) The highest oxidation state is exhibited in oxoanions of a metal.
- Q4.26 (i): Indicate the steps in the preparation of: (i) K_{2}Cr_{2}O_{7} from chromite ore.
- Q4.26 (ii): Indicate the steps in the preparation of: (ii) KMnO_{4} from pyrolusite ore.
- Q4.26(i): Indicate the steps in the preparation of: (i) \(K_{2}Cr_{2}O_{7}\) from chromite ore.
- Q4.26(ii): Indicate the steps in the preparation of: (ii) \(KMnO_{4}\) from pyrolusite ore.
- Q4.27: What are alloys? Name an important alloy which contains some of the lanthanoid metals. Mention its uses.
- Q4.27: What are alloys? Name an important alloy which contains some of the lanthanoid metals. Mention its uses.
- Q4.28: What are inner transition elements? Decide which of the following atomic numbers are the atomic numbers of the inner transition elements : 29, 59, 74, 95, 102, 104.
- Q4.28: What are inner transition elements? Decide which of the following atomic numbers are the atomic numbers of the inner transition elements : 29, 59, 74, 95, 102, 104.
- Q4.29: The chemistry of the actinoid elements is not so smooth as that of the lanthanoids. Justify this statement by giving some examples from the oxidation state of these elements.
- Q4.29: The chemistry of the actinoid elements is not so smooth as that of the lanthanoids. Justify this statement by giving some examples from the oxidation state of these elements.
- Q4.3: Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
- Q4.3: Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
- Q4.30: Which is the last element in the series of the actinoids? Write the electronic configuration of this element. Comment on the possible oxidation state of this element.
- Q4.30: Which is the last element in the series of the actinoids? Write the electronic configuration of this element. Comment on the possible oxidation state of this element.
- Q4.31: Use Hund’s rule to derive the electronic configuration of \(Ce^{3+}\) ion, and calculate its magnetic moment on the basis of ‘spin-only’ formula.
- Q4.31: Use Hund’s rule to derive the electronic configuration of Ce^{3+} ion, and calculate its magnetic moment on the basis of ‘spin-only’ formula.
- Q4.32: Name the members of the lanthanoid series which exhibit +4 oxidation states and those which exhibit +2 oxidation states. Try to correlate this type of behaviour with the electronic configurations of these elements.
- Q4.32: Name the members of the lanthanoid series which exhibit +4 oxidation states and those which exhibit +2 oxidation states. Try to correlate this type of behaviour with the electronic configurations of these elements.
- Q4.33 (i): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (i) electronic configuration
- Q4.33 (ii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (ii) oxidation states and
- Q4.33(i): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (i) electronic configuration
- Q4.33(ii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (ii) oxidation states
- Q4.33(iii): Compare the chemistry of the actinoids with that of lanthanoids with reference to: (iii) chemical reactivity.
- Q4.34: Write the electronic configurations of the elements with the atomic numbers 61, 91, 101, and 109.
- Q4.34: Write the electronic configurations of the elements with the atomic numbers 61, 91, 101, and 109.
- Q4.35 (i): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (i) electronic configurations
- Q4.35 (ii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (ii) oxidation states
- Q4.35 (iii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iii) ionisation enthalpies
- Q4.35 (iv): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iv) atomic sizes.
- Q4.35(i): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (i) electronic configurations
- Q4.35(ii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (ii) oxidation states
- Q4.35(iii): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iii) ionisation enthalpies
- Q4.35(iv): Compare the general characteristics of the first series of the transition metals with those of the second and third series metals in the respective vertical columns. Give special emphasis on the following points: (iv) atomic sizes.
- Q4.36: Write down the number of 3d electrons in each of the following ions: \(Ti^{2+}\), \(V^{2+}\), \(Cr^{3+}\), \(Mn^{2+}\), \(Fe^{2+}\), \(Fe^{3+}\), \(Co^{2+}\), \(Ni^{2+}\) and \(Cu^{2+}\). Indicate how would you expect the five 3d orbitals to be occupied for these hydrated ions (octahedral).
- Q4.36: Write down the number of 3d electrons in each of the following ions: Ti^{2+}, V^{2+}, Cr^{3+}, Mn^{2+}, Fe^{2+}, Fe^{3+}, Co^{2+}, Ni^{2+} and Cu^{2+}. Indicate how would you expect the five 3d orbitals to be occupied for these hydrated ions (octahedral).
- Q4.37: Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.
- Q4.37: Comment on the statement that elements of the first transition series possess many properties different from those of heavier transition elements.
- Q4.38: What can be inferred from the magnetic moment values of the following complex species ?
- Q4.38: What can be inferred from the magnetic moment values of the following complex species ?
- Q4.4: To what extent do the electronic configurations decide the stability of oxidation states in the first series of the transition elements? Illustrate your answer with examples.
- Q4.4: To what extent do the electronic configurations decide the stability of oxidation states in the first series of the transition elements? Illustrate your answer with examples.
- Q4.5: What may be the stable oxidation state of the transition element with the following d electron configurations in the ground state of their atoms : \(3d^{3}\), \(3d^{5}\), \(3d^{8}\) and \(3d^{4}\)?
- Q4.5: What may be the stable oxidation state of the transition element with the following d electron configurations in the ground state of their atoms : 3d^{3}, 3d^{5}, 3d^{8} and 3d^{4}?
- Q4.6: Name the oxometal anions of the first series of the transition metals in which the metal exhibits the oxidation state equal to its group number.
- Q4.6: Name the oxometal anions of the first series of the transition metals in which the metal exhibits the oxidation state equal to its group number.
- Q4.7: What is lanthanoid contraction? What are the consequences of lanthanoid contraction?
- Q4.7: What is lanthanoid contraction? What are the consequences of lanthanoid contraction?
- Q4.8: What are the characteristics of the transition elements and why are they called transition elements? Which of the d-block elements may not be regarded as the transition elements?
- Q4.8: What are the characteristics of the transition elements and why are they called transition elements? Which of the d-block elements may not be regarded as the transition elements?
- Q4.9: In what way is the electronic configuration of the transition elements different from that of the non transition elements?
- Q4.9: In what way is the electronic configuration of the transition elements different from that of the non transition elements?
CBSE Solutions for Class 12 Chemistry The d- and f-Block Elements
Chapters in CBSE - Class 12 Chemistry
Top Tutors who teach The d- and f-Block Elements
Top Tutor
Yamare Village, Bangalore
8 yrs of
Exp
1 student
8 hrs of classes completed
1500
per hour
Student's Home
Tutor's home
Hello! I’m Anwar, a certified mathematics tutor with over 10 years of experience helping students excel at every stage, from Primary, Middle School to High School and University level. My passion is to make math clear, engaging, and enjoyable for learners worldwide. I specialize in teaching Maths to students from Grade 8 to Grade 12 across multiple curricula including IGCSE/Cambridge, IB (MYP), GCSE, CBSE and ICSE. I focus on concept clarity and exam-oriented preparation, helping students understand not just how to solve questions, but how to approach them logically. My teaching approach is highly interactive and student-centric. Each session begins with clear explanation of concepts, followed by strategies to decode questions and step-by-step solving methods. Students actively participate during the class and solve questions along with me, which allows me to check their understanding in real time. Once the concepts are tested, students solve questions independently while I closely monitor their working and provide instant feedback wherever required. This method helps students strengthen accuracy, speed and confidence, and is especially effective for students who feel weak or anxious in Maths and Science. I offer one-to-one personalized tutoring with a minimum class duration of one hour, ensuring complete attention and customized learning for every student.
Super Tutor
Jayanagar East, Bangalore
4 yrs of
Exp
67 students
5854 hrs of classes completed
250
per hour
Online Classes
Tutor's home
I take classes for grade 12 of Karnataka State PUC, CBSE, ISC, NIOS and Cambridge or IGCSE A Levels. I have 4 years of teaching experience.
Super Tutor
Besant Nagar, Chennai
20 yrs of
Exp
23 students
892 hrs of classes completed
750
per hour
Online Classes
am geetha, from Chennai, a very dedicated and sincere professional from my end and I ensure that it is inculcated and reciprocated by the students as well. I have been in the teaching field since 2005 after my master's. I have tutored more 350 students in various batches and have boosted their confidence in Math, making the subject enjoyable for them. All of my past students have passed in flying colors and are flourishing in their professional careers now My class will be focused on strengthening the basic concepts and foundation that is essential to break down complex problems by using simple methods. I focus on clearing all the doubts step by step and conducting test papers after the completion of every lesson which will make it easier for the students to crack their school quarterly, half-yearly, and final exams with ease. Thank you, best regards from geetha Kumar.
Geetha Ma'am explains well and is ready to clear doubts. So far the experience has been very good and helpful to us.
Super Tutor
Arrah Chowk, Arrah
11 yrs of
Exp
23 students
815 hrs of classes completed
400
per hour
Online Classes
A Highly talented Chemistry teacher with excellent communication skills demonstrated by 11 years of teaching experience. Strong theoretical and good knowledge of Chemistry. A good Communication skills to maintain great relationship with students and ability to work well with others. You Can also watch me on my YouTube channel L.k.Soni Chemistry Classes. During live classes developed an approach where students can focus on the classes without any Distraction.
I had the opportunity to attend one-on-one Classes for class 12 CBSE Chemistry with him, and the experience was excellent. His way of explaining concepts is very clear, simple, and easy to understand. He makes sure that every doubt is addressed patiently and focuses not just on memorising reactions and formulas, but on developing a proper understanding of the concepts. I especially appreciated his exam-oriented approach, which makes difficult topics feel much more manageable and helps build confidence for the CBSE Board exams. He is very knowledgeable, supportive, and genuinely dedicated to his students. I would highly recommend his classes to any Class 12 CBSE Chemistry student looking for strong conceptual clarity and effective preparation.
Super Tutor
Sector 59 E Block, Noida
6 yrs of
Exp
104 students
4775 hrs of classes completed
300
per hour
Online Classes
In my role as a teacher for Class 12, I've had the privilege of fostering a dynamic and engaging learning environment. Utilizing a combination of traditional teaching methods and modern technology, I've been able to ensure that students remain both interested and challenged. I've consistently strived to create a classroom atmosphere that promotes curiosity and encourages students to ask questions, facilitating a deeper understanding of the subject matter. As a Class 12th mentor, my goal has been to equip students not only with academic knowledge but also with the skills necessary for their future endeavors.
Very good teacher, the explanation was nice, i was able to understand all the little concepts that too in a short span of time.
Other Subjects in CBSE - Class 12
Download free CBSE - Class 12 Chemistry The d- and f-Block Elements Exercises worksheets
Download Now
