BTech Tuition near me in Wipro Office, Bangalore

GATEIIT Long-Term and Crash Course Coaching Classes for USMLE, MRCP, PLAB, UPSC CMS, Medical Services Exams, M.S/M.D. Medical Entrance exams, GATE / IIT-JAM, JEST, GPAT, CMI, PGCET/ P.Hd Entrances/CUET, IISER-IAT, NISER-NEST, KCET, CSIR -NET/ CBSE UGC -NET/JRF/ SRF/ IIT-JEE Mains & Advanced/ Karnataka CET (K-CET)/ CBSE-NEET/ Pre-Medical Entrances/ JIPMER/ CMC/ AIIMS / IIT-JAM/ ESE/ M.SC/ MCA/ B.Sc/ESE/ PSU/ GPAT (Graduate Pharmacy Aptitude Test), ISI B.Stat/ ISI M.Stat/ B.MATH, NEET-PG/ PG Medical Entrance Test, AIPGMEE, DNB-CET, PGET, M.Math/ MBBS/BDS Subjects Tuition/ Tuition in J P Nagar for class Vth, VIth, VIIth, VIIIth, IXth, 10th,11th and 12th / PUC / SSLC. Pre-Medical Entrance exams (NEET, AIIMS, JIPMER) / Engineering Subject Tuition/ IIT JEE Foundation Course for class 9th & 10th / NEET Pre-Medical Foundation Course. Other Competitive exams University Grants Commission (UGC) - National Eligibility Test for Lectureship (NET) & Junior Research Fellowship (JRF). Coaching for Council for Scientific Industrial Research (CSIR) NET/JRF. GATE Foundation course for B.E/B.Tech 2nd & 3rd year students.

I can teach M1-4 physics ,Applied thermodynamics, fluid mechanics to any branch of engineering.......I have done my engineering from vtu and I know the pattern of questions and cal helt you understand concept very easily

Good communication and teaching skills. I have two years of teaching experience . (science) Now working at research and developement company. Ability to convience students with simple examples. If you give chance for demo class...you only select what is best

I am working as a Associate professor in an Engineering college. Handling B.E (EEE ), M.Tech (Power Electronics ) courses. can teach very effectively Power Electronics, Basic Electrical, Basic Electronics , Industrial drives, Physics for School , DEEE subjects

Taught several years in several study centre and helped my students to score excellent marks in their respective subjects

I teach B.Tech subjects related to Electronics, including VLSI Design, Digital Electronics, and Foundations of Electronics. I have been teaching these subjects for over 15 years, helping students strengthen their concepts, excel academically, and develop a practical understanding of the field. My goal is to make complex topics accessible while preparing students for both exams and real-world applications. I hold a Master’s degree (M.E.) in VLSI Design and a Bachelor’s degree (B.Tech) in Electronics and Instrumentation Engineering. In addition, I completed a Diploma in Electronics and Communication Engineering and an advanced postgraduate-level certification in VLSI Chip Design from IISc Bengaluru. These qualifications have given me a strong foundation and deep expertise, enabling me to teach and mentor students effectively. Over the past 15 years, I have gained extensive experience in teaching, mentoring, and research. Currently, I serve as a Professor of Practice at MIT Square, where I teach, mentor, and supervise research projects and interns in areas such as Brain-Inspired Computing and CAD VLSI design. This experience allows me to combine academic rigor with practical, hands-on learning for my students. I am passionate about learning and exploring cutting-edge innovations, particularly in smart VLSI Chip Design. I integrate these insights into my teaching to ensure students gain exposure to the latest technological trends. Additionally, I mentor Bloom Riddhi Siddhi, a digital start-up founded by my daughter, providing guidance on VLSI-related projects and fostering innovation. My teaching philosophy is guided by core values such as accountability, compassion, honesty, integrity, transparency, and resilience. I believe these values are essential not only for academic success but also for developing professional competence and ethical responsibility in students. I conduct both online and offline classes, following a flexible and structured approach tailored to each student’s needs. I start with a clear lesson plan, emphasizing interactive learning and encouraging questions and discussions. Whenever possible, I incorporate practical examples, demonstrations, and project-based exercises to reinforce theoretical concepts. I use PPTs and a whiteboard to make concepts clear and engaging. My objective is to ensure that students not only understand the subject but also learn to apply it effectively in real-world scenarios. I aim to make learning detailed, interactive, and enjoyable, helping students achieve both academic excellence and practical competence in Electronics and VLSI Design.

I am an Electronics Engineer with two years of academic experience in Engineering colleges. Teaching is my passion and would love to share my knowledge with the students in the best manner.

I am having 11 years of real time experience in system programming, where c/c++ and data structures are used mostly.I can teach students with real life examples, which will help to understand better.Not only programming, i will explain the real time development environment in both windows and linux platform. i have interviewed many candidates and i know where they face difficulties.So i will provide all such details, so that they can understand the required concepts easily and it will help them to crack technical interviews. last but not the least, teaching is my passion.i would love to share my knowledge in the same way as i learned it.

I taught subjects in for B Tech Mechanical Engineering Students for more than 4 years.

Have Completed B.E in Mechanical Engineering from VTU. Have Scored 90+ Marks throughout in Mathematics since 10th Class till Maths IV (Engineering) Have Scored 75+ Marks in Physics in Engineering

I have done my MTech from IISc (Indian Institute of Science) Bangalore. I have 10 years working experience as research scientist for Govt of India. I am very strong in Physics, Chemistry, Math and Chemical Engineering all subjects. I am willing to teach only PUC (Physics, Chemistry, Math) and BTech common subjects (Engineering Mathematics, Fluid Mechanics, Heat Transfer, Control System and Process Engineering etc). I can teach only during evening hours and weekends.

Before talking about my skill and strength,first of all I want to convey one thing that I have taught more than 5000 students in a private college.I have started teaching from my 12th class. Teaching is my passion. In that college I was a very popular teacher.The students likes me so much for quality teaching. I can clear the doubt in the simplest manner. Generally I focus on the weakest zone of the student while teaching and teach efficiently giving different suitable examples.My class is always an interactive one as I always involve the students in solving the problem. I don't restrict the student to ask doubt.I was a topper of my college.In our college also I was well known for my teaching quality. I have also served as home tutor many times..Two of my student got IIT as well. And some students got many good colleges.Now am sharing one of the incident I have faced. In my b tech days, I used to to teach my professor's son. I taught him chemistry.once my professor called me and thanked me .He told that for you only my son's chemistry fear went away.now he is scoring good enough.He was not able to get 70 Marks ,now he is scoring 95 marks.This is not the one incident that I faced, a lot. Many parents applauded me,thank me.I can guarantee you, I Wii try my best and will show the results. I have completed my post graduation from IIT Bhubaneswar. I CAN TEACH EFFICIENTLY THROUGH ONLINE. Currently I am working as an Aerospace engineer for Rolls-Royce account in Infosys Engeneering service.

I am a software engineer at Infosys. I can teach classes from 6 to 12. I can speak in English or Hindi fluently. And the distance I can travel is 2km. I am from Uttar Pradesh, but I was born and brought up in Bangalore mostly.

1. Preparation of Design Brief Report (DBR) Electrical, plumbing,HVAC & Fire Fighting 2. Lighting design calculation and preparation of Electrical load calculation sheet. 3. Selection and sizing of Transformer ,DG, Circuit Breakers & HT & LT cables etc., and preparation of Voltage drop ,Short circuit calculations,DG load sharing & checking for Electricity Board inline requirements & Norms 4. Design of Electrical single line diagram, power and lighting distribution concepts, DB Schematics .Design of ELV system. 5. Design of detailed drawings like lighting layout, cable routing layout, Earthing layout etc., 6. Preparation of Bill of Quantities, Electrical Cost Estimate Approval Drawings and Tender Specifications. 7. Vendor Review ,Pre-qualification ,Technical negotiation & Project meetings with clients. 8. Design of water requirement(As per NBC), Underground & Overhead Tank capacity, Pump capacity(HP),Pipe selection & sizing. 9. Design of Rain water run-off calculation. water flow & Balance diagram, sewerage drain, surface drain & oil water separator pipe layouts. 10. Design of Gas Suppression system for Data centers. 11. Preparation of HVAC-Heat Load Calculation-E20, Ventilation requirement, Duct sizing calculation. 12. Coordination with all services Architectural, Structural ,Electrical, HVAC & Plumbing,Fire fighting.

I am a M.tech in Computer Science. I have 8 years of experience in teaching. I was in lectureship in Engineering college. I was taking the subjects like C , C++ , OS , Database , Computer Architecture and Real Time Systems.

I have been teaching in college for 2 years , so hoping for a positive response

I am working professional having an experience of 3 years in embedded systems domain.. Working from hardware to complete system bring up. Having skillset in embedded C, linux systems, linux system programming, linux kernel programming, linux device driver development, yocto, computer networks, computer processors and architecture.

Hi, Myself Kiran Kumar Y, I have totally 6+ years of IT experience and I work on Java and j2ee technologies. I have completed master degree in the year of 2017 from JNTUA. I would like to teach the students who are willing to pursue their carrier in IT industry. Having good experience on developing enterprise applications.

I hold a Bachelor's degree in Biotechnology Engineering, where I gained a strong academic foundation in key subjects such as molecular biology, genetic engineering, microbiology, biochemistry, and immunotechnology. My engineering education provided me with both theoretical knowledge and practical skills through rigorous coursework and extensive hands-on laboratory experience. During college, I was particularly interested in molecular techniques, cell culture, and bioprocess technology. I participated in various workshops and lab training sessions that helped me build technical expertise in techniques such as PCR, electrophoresis, DNA/RNA extraction, protein purification, and ELISA. I also gained exposure to bioinformatics tools and learned how to analyze biological data effectively. As part of my academic project work, I worked on research that involved microbial production, enzyme technology, or genetic modification (you can let me know the specific topic if you'd like it mentioned here). This experience not only strengthened my technical abilities but also enhanced my skills in experimental design, data interpretation, and scientific communication. After completing my degree, I started working in the biotechnology industry where I focused on areas such as quality control, analytical method development, and molecular biology techniques. I have hands-on experience with qPCR-based assays for host cell DNA quantification, host cell protein detection, and other GMP-compliant analytical methods. I’ve worked with samples from microbial (E. coli, Pichia pastoris) and mammalian expression systems, and I’ve gained a clear understanding of regulatory requirements in biologics manufacturing. Currently, I’m involved in Quality Control testing for advanced therapies, specifically CAR-T cell and gene therapy products. My work includes molecular characterization of anti-BCMA CAR-T cells, vector copy number quantification, and osmolality testing at the final product stage. I am familiar with working in GMP environments, documentation, and meeting quality standards. My engineering background, combined with over 3.5 years of industry experience, has prepared me well for a challenging and evolving career in biotechnology, with a strong interest in cell therapy, molecular assays, and innovation-driven research.

I am a working IT professional with a good academic background . Done BTech in computer science . As teaching is one of my hobby , so pursuing the same on urban pro.

I am trained in VLSI front end design and verification and working as embedded developer in reputed organisation, I've experience of corporate level training for team members for subject matters

I am a Tutor,Geotechnical Engineer,Singer.I am giving online one on one tutoring sessions to B.E/B.Tech students since 2 years.I have a post graduate degree in Geotechnical engineering from Government college of Technology,Coimbatore

this is Sadashiv lalasangi, I have six experience in Engineering college and taught mechanical subjects like ATD, BTD, HMT, TURB, etc .........so I m looking for the students to give excellence knowledge about the subject and also which helps to get more marks in the examination

Hi my name is ambika. I am a tutor. I am giving tution online and home tution since 2017. I am certified in microbiology. I have a mphil degree. My key skills are, Led class online using Blackboard and PowerPoint Communicated with students using online chat features and headphones for voice Managed and tracked attendance and participation of students Provided consistent feedback to students related to each lesson taught Conducted small group and individualized instruction through the use of online breakout rooms Assessed students learning through discussions, projects, and formal assessments.

I had been teaching asistant for competitive programming at coding ninjas and also give private tution to 100 students in past 3 years