Find the best tutors and institutes for Class 12 Tuition
Q2.9:
The resistance of a conductivity cell containing 0.001M KCl solution at 298 K is 1500 (\Omega). What is the cell constant if conductivity of 0.001M KCl solution at 298 K is 0.146 (\times) (10^{-3}) S (cm^{-1}).
Solution :
Step 1: Identifying Given Variables
Based on the provided data, we define the following parameters:
- Concentration of KCl solution ($C$): $0.001 \text{ M}$
- Resistance of the solution ($R$): $1500 \text{ }\Omega$
- Conductivity of the solution ($\kappa$): $0.146 \times 10^{-3} \text{ S cm}^{-1}$
- Temperature ($T$): $298 \text{ K}$
Step 2: Establishing the Theoretical Framework
The relationship between conductivity ($\kappa$), resistance ($R$), and the cell constant ($G^*$) is defined by the fundamental electrochemical equation [Per the definition of cell constant]:
$$\kappa = \frac{1}{R} \times \left( \frac{l}{A} \right)$$
Where:
- $\kappa$ is the conductivity ($\text{S cm}^{-1}$)
- $R$ is the resistance ($\Omega$)
- $\frac{l}{A}$ is the cell constant ($G^*$), expressed in $\text{cm}^{-1}$
Step 3: Rearranging for Cell Constant ($G^*$)
To isolate the cell constant, we rearrange the formula:
$$G^* = \kappa \times R$$
Step 4: Algebraic Substitution and Computation
Substituting the given values into the derived equation:
$$G^* = (0.146 \times 10^{-3} \text{ S cm}^{-1}) \times (1500 \text{ }\Omega)$$
Performing the arithmetic multiplication:
$$G^* = 0.146 \times 1.5$$
$$G^* = 0.219 \text{ cm}^{-1}$$
Visual Representation of a Conductivity Cell
Step 5: Dimensional Analysis Verification
Checking the units to ensure physical consistency:
$$\text{Unit of } G^* = \text{Unit of } \kappa \times \text{Unit of } R$$
$$\text{Unit of } G^* = \left( \text{S cm}^{-1} \right) \times \left( \Omega \right)$$
Since $\text{S} = \Omega^{-1}$ (Conductance is the reciprocal of resistance):
$$\text{Unit of } G^* = \left( \Omega^{-1} \text{ cm}^{-1} \right) \times \Omega = \text{cm}^{-1}$$
[By dimensional homogeneity, the unit is confirmed to be $\text{cm}^{-1}$].
Final Solution: The cell constant of the conductivity cell is 0.219 $\text{cm}^{-1}$.
More Questions from Class 12 Chemistry Electrochemistry Exercises
- Q2.1: Arrange the following metals in the order in which they displace each other from the solution of their salts. Al, Cu, Fe, Mg and Zn.
- Q2.1: Arrange the following metals in the order in which they displace each other from the solution of their salts. Al, Cu, Fe, Mg and Zn.
- Q2.10: The conductivity of sodium chloride at 298 K has been determined at different concentrations and the results are given below: Calculate (\Lambda_{m}) for all concentrations and draw a plot between (\Lambda_{m}) and (c^{1/2}). Find the value of (\Lambda^{0}_{m}).
- Q2.10: The conductivity of sodium chloride at 298 K has been determined at different concentrations and the results are given below: Calculate \(\Lambda_{m}\) for all concentrations and draw a plot between \(\Lambda_{m}\) and \(c^{1/2}\). Find the value of \(\Lambda_{m}^{\circ}\).
- Q2.11: Conductivity of 0.00241 M acetic acid is 7.896 (\times) (10^{-5}) S (cm^{-1}). Calculate its molar conductivity. If (\Lambda^{0}_{m}) for acetic acid is 390.5 S (cm^{2} mol^{-1}), what is its dissociation constant?
- Q2.11: Conductivity of 0.00241 M acetic acid is \(7.896 \times 10^{-5} S cm^{-1}\). Calculate its molar conductivity. If \(\Lambda_{m}^{\circ}\) for acetic acid is \(390.5 S cm^{2} mol^{-1}\), what is its dissociation constant?
- Q2.12 (i): How much charge is required for the following reduction: (i) 1 mol of (Al^{3+}) to Al?
- Q2.12 (ii): How much charge is required for the following reduction: (ii) 1 mol of (Cu^{2+}) to Cu?
- Q2.12 (iii): How much charge is required for the following reduction: (iii) 1 mol of (MnO_{4}^{-}) to (Mn^{2+})?
- Q2.12(i): How much charge is required for the following reduction: 1 mol of \(Al^{3+}\) to Al?
- Q2.12(ii): How much charge is required for the following reduction: 1 mol of \(Cu^{2+}\) to Cu?
- Q2.12(iii): How much charge is required for the following reduction: 1 mol of \(MnO_{4}^{-}\) to \(Mn^{2+}\)?
- Q2.13 (i): How much electricity in terms of Faraday is required to produce (i) 20.0 g of Ca from molten (CaCl_{2})?
- Q2.13 (ii): How much electricity in terms of Faraday is required to produce (ii) 40.0 g of Al from molten (Al_{2}O_{3})?
- Q2.13(i): How much electricity in terms of Faraday is required to produce 20.0 g of Ca from molten \(CaCl_{2}\)?
- Q2.13(ii): How much electricity in terms of Faraday is required to produce 40.0 g of Al from molten \(Al_{2}O_{3}\)?
- Q2.14 (i): How much electricity is required in coulomb for the oxidation of (i) 1 mol of (H_{2}O) to (O_{2})?
- Q2.14 (ii): How much electricity is required in coulomb for the oxidation of (ii) 1 mol of (FeO) to (Fe_{2}O_{3})?
- Q2.14(i): How much electricity is required in coulomb for the oxidation of 1 mol of \(H_{2}O\) to \(O_{2}\)?
- Q2.14(ii): How much electricity is required in coulomb for the oxidation of 1 mol of FeO to \(Fe_{2}O_{3}\)?
- Q2.15: A solution of (Ni(NO_{3})_{2}) is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?
- Q2.15: A solution of \(Ni(NO_{3})_{2}\) is electrolysed between platinum electrodes using a current of 5 amperes for 20 minutes. What mass of Ni is deposited at the cathode?
- Q2.16: Three electrolytic cells A,B,C containing solutions of (ZnSO_{4}), (AgNO_{3}) and (CuSO_{4}), respectively are connected in series. A steady current of 1.5 amperes was passed through them until 1.45 g of silver deposited at the cathode of cell B. How long did the current flow? What mass of copper and zinc were deposited?
- Q2.16: Three electrolytic cells A,B,C containing solutions of \(ZnSO_{4}\), \(AgNO_{3}\) and \(CuSO_{4}\), respectively are connected in series. A steady current of 1.5 amperes was passed through them until 1.45 g of silver deposited at the cathode of cell B. How long did the current flow? What mass of copper and zinc were deposited?
- Q2.17 (i): Using the standard electrode potentials, predict if the reaction between the following is feasible: (i) (Fe^{3+}(aq)) and (I^{-}(aq))
- Q2.17 (ii): Using the standard electrode potentials, predict if the reaction between the following is feasible: (ii) (Ag^{+} (aq)) and Cu(s)
- Q2.17 (iii): Using the standard electrode potentials, predict if the reaction between the following is feasible: (iii) (Fe^{3+} (aq)) and (Br^{-} (aq))
- Q2.17 (iv): Using the standard electrode potentials, predict if the reaction between the following is feasible: (iv) Ag(s) and (Fe^{3+} (aq))
- Q2.17 (v): Using the standard electrode potentials, predict if the reaction between the following is feasible: (v) (Br_{2} (aq)) and (Fe^{2+} (aq)).
- Q2.17(i): Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: \(Fe^{3+}(aq)\) and \(I^{-}(aq)\)
- Q2.17(ii): Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: \(Ag^{+} (aq)\) and \(Cu(s)\)
- Q2.17(iii): Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: \(Fe^{3+} (aq)\) and \(Br^{-} (aq)\)
- Q2.17(iv): Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: \(Ag(s)\) and \(Fe^{3+} (aq)\)
- Q2.17(v): Using the standard electrode potentials given in Table 3.1, predict if the reaction between the following is feasible: \(Br_{2} (aq)\) and \(Fe^{2+} (aq)\).
- Q2.18 (i): Predict the products of electrolysis in each of the following: (i) An aqueous solution of (AgNO_{3}) with silver electrodes.
- Q2.18 (ii): Predict the products of electrolysis in each of the following: (ii) An aqueous solution of (AgNO_{3}) with platinum electrodes.
- Q2.18 (iii): Predict the products of electrolysis in each of the following: (iii) A dilute solution of (H_{2}SO_{4}) with platinum electrodes.
- Q2.18 (iv): Predict the products of electrolysis in each of the following: (iv) An aqueous solution of (CuCl_{2}) with platinum electrodes.
- Q2.18(i): Predict the products of electrolysis in each of the following: An aqueous solution of \(AgNO_{3}\) with silver electrodes.
- Q2.18(ii): Predict the products of electrolysis in each of the following: An aqueous solution of \(AgNO_{3}\) with platinum electrodes.
- Q2.18(iii): Predict the products of electrolysis in each of the following: A dilute solution of \(H_{2}SO_{4}\) with platinum electrodes.
- Q2.18(iv): Predict the products of electrolysis in each of the following: An aqueous solution of \(CuCl_{2}\) with platinum electrodes.
- Q2.2: Given the standard electrode potentials, (K^{+}/K) = –2.93V, (Ag^{+}/Ag) = 0.80V, (Hg^{2+}/Hg) = 0.79V (Mg^{2+}/Mg) = –2.37 V, (Cr^{3+}/Cr) = – 0.74V Arrange these metals in their increasing order of reducing power.
- Q2.2: Given the standard electrode potentials, \(K^{+}/K = –2.93V\), \(Ag^{+}/Ag = 0.80V\), \(Hg^{2+}/Hg = 0.79V\) \(Mg^{2+}/Mg = –2.37 V\), \(Cr^{3+}/Cr = – 0.74V\) Arrange these metals in their increasing order of reducing power.
- Q2.3 (i): Depict the galvanic cell in which the reaction (Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)) takes place. Further show: (i) Which of the electrode is negatively charged?
- Q2.3 (ii): Depict the galvanic cell in which the reaction (Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)) takes place. Further show: (ii) The carriers of the current in the cell.
- Q2.3 (iii): Depict the galvanic cell in which the reaction (Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)) takes place. Further show: (iii) Individual reaction at each electrode.
- Q2.3(i): Depict the galvanic cell in which the reaction \(Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)\) takes place. Further show: Which of the electrode is negatively charged?
- Q2.3(ii): Depict the galvanic cell in which the reaction \(Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)\) takes place. Further show: The carriers of the current in the cell.
- Q2.3(iii): Depict the galvanic cell in which the reaction \(Zn(s)+2Ag^{+}(aq) \rightarrow Zn^{2+}(aq)+2Ag(s)\) takes place. Further show: Individual reaction at each electrode.
- Q2.4 (i): Calculate the standard cell potentials of galvanic cell in which the following reaction takes place: (i) (2Cr(s) + 3Cd^{2+}(aq) \rightarrow 2Cr^{3+}(aq) + 3Cd) Calculate the (\Delta_{r}G^{o}) and equilibrium constant of the reaction.
- Q2.4 (ii): Calculate the standard cell potentials of galvanic cell in which the following reaction takes place: (ii) (Fe^{2+}(aq) + Ag^{+}(aq) \rightarrow Fe^{3+}(aq) + Ag(s)) Calculate the (\Delta_{r}G^{o}) and equilibrium constant of the reaction.
- Q2.4(i): Calculate the standard cell potentials of galvanic cell in which the following reaction takes place: \(2Cr(s) + 3Cd^{2+}(aq) \rightarrow 2Cr^{3+}(aq) + 3Cd(s)\) Calculate the \(\Delta_{r}G^{\circ}\) and equilibrium constant of the reaction.
- Q2.4(ii): Calculate the standard cell potentials of galvanic cell in which the following reaction takes place: \(Fe^{2+}(aq) + Ag^{+}(aq) \rightarrow Fe^{3+}(aq) + Ag(s)\) Calculate the \(\Delta_{r}G^{\circ}\) and equilibrium constant of the reaction.
- Q2.5 (i): Write the Nernst equation and emf of the following cell at 298 K: (i) (Mg(s)|Mg^{2+}(0.001M)||Cu^{2+}(0.0001 M)|Cu(s))
- Q2.5 (ii): Write the Nernst equation and emf of the following cell at 298 K: (ii) (Fe(s)|Fe^{2+}(0.001M)||H^{+}(1M)|H_{2}(g)(1bar)| Pt(s))
- Q2.5 (iii): Write the Nernst equation and emf of the following cell at 298 K: (iii) (Sn(s)|Sn^{2+}(0.050 M)||H^{+}(0.020 M)|H_{2}(g) (1 bar)|Pt(s))
- Q2.5 (iv): Write the Nernst equation and emf of the following cell at 298 K: (iv) (Pt(s)|Br^{-}(0.010 M)|Br_{2}(l )||H^{+}(0.030 M)| H_{2}(g) (1 bar)|Pt(s)).
- Q2.5(i): Write the Nernst equation and emf of the following cell at 298 K: \(Mg(s)|Mg^{2+}(0.001M)||Cu^{2+}(0.0001 M)|Cu(s)\)
- Q2.5(ii): Write the Nernst equation and emf of the following cell at 298 K: \(Fe(s)|Fe^{2+}(0.001M)||H^{+}(1M)|H_{2}(g)(1bar)| Pt(s)\)
- Q2.5(iii): Write the Nernst equation and emf of the following cell at 298 K: \(Sn(s)|Sn^{2+}(0.050 M)||H^{+}(0.020 M)|H_{2}(g) (1 bar)|Pt(s)\)
- Q2.5(iv): Write the Nernst equation and emf of the following cell at 298 K: \(Pt(s)|Br^{-}(0.010 M)|Br_{2}(l )||H^{+}(0.030 M)| H_{2}(g) (1 bar)|Pt(s)\).
- Q2.6: In the button cells widely used in watches and other devices the following reaction takes place: (Zn(s) + Ag_{2}O(s) + H_{2}O(l ) \rightarrow Zn^{2+}(aq) + 2Ag(s) + 2OH^{-}(aq)) Determine (\Delta_{r}G^{o}) and (E^{o}) for the reaction.
- Q2.6: In the button cells widely used in watches and other devices the following reaction takes place: \(Zn(s) + Ag_{2}O(s) + H_{2}O(l ) \rightarrow Zn^{2+}(aq) + 2Ag(s) + 2OH^{-}(aq)\) Determine \(\Delta_{r}G^{\circ}\) and \(E^{\circ}\) for the reaction.
- Q2.7: Define conductivity and molar conductivity for the solution of an electrolyte. Discuss their variation with concentration.
- Q2.7: Define conductivity and molar conductivity for the solution of an electrolyte. Discuss their variation with concentration.
- Q2.8: The conductivity of 0.20 M solution of KCl at 298 K is 0.0248 S (cm^{-1}). Calculate its molar conductivity.
- Q2.8: The conductivity of 0.20 M solution of KCl at 298 K is \(0.0248 S cm^{-1}\). Calculate its molar conductivity.
- Q2.9: The resistance of a conductivity cell containing 0.001M KCl solution at 298 K is \(1500 \Omega\). What is the cell constant if conductivity of 0.001M KCl solution at 298 K is \(0.146 \times 10^{-3} S cm^{-1}\).
CBSE Solutions for Class 12 Chemistry Electrochemistry
Chapters in CBSE - Class 12 Chemistry
Top Tutors who teach Electrochemistry
Top Tutor
Uttam Nagar, Delhi
10 yrs of
Exp
2 students
132 hrs of classes completed
1000
per hour
Online Classes
Student's Home
Efficient professional with 9+ years of experience and proven knowledge of lectures, training and development, and adaptive teaching methods. I aim to leverage my skills to successfully fill the significant role of a teacher in your life. Also, through my experience, I have developed interactive teaching methods that can help you understand every concept's very applicability, enabling you to correlate the readings with practical situations.
Super Tutor
Bannerghatta Main Road, Bangalore
12 yrs of
Exp
49 students
1306 hrs of classes completed
300
per hour
Online Classes
Tutor's home
I am a dedicated tutor. I am having an experience of 12years in teaching accountancy through online as well as privately. I am teaching accountancy for 11, 12, B.Com, B.B.A, ACS, CA ICWA, CMA and all accountancy related courses. My students have fared well in their exams. My Approach is: 1.I will be teaching according to the students way. 2. I will clarify with the students having understood the topics and then only I will proceed to next topic. 3. Regular assessments given to students to know their progress.
Super Tutor
Sector 15, New Chandigarh
20 yrs of
Exp
88 students
3171 hrs of classes completed
400
per hour
Online Classes
Tutor's home
I have been teaching chemistry since 2007. I have well prepared notes, assignments and test series. In my class I first discuss the topic then discuss the questions related to the topic and giving assignment questions on the daily basis. I taught till date more than 2000 students. I had taught in various reputed institution in Chandigarh.i sucessful completed one year online teaching on unacademy as well as running my own institute. On unacademy my rating is 4.62/5. I am teaching ISC and CBSE BOARD for academic as well as for competitive exams. My students are doing MBBS and engineering for renowned institute of India. Many students are well settled in their lives. Teaching chemistry is my passion, I can proudly say that I am teacher by choice. I love to hear comments from my students regarding my teaching methodology for the same I use animated video and gif so students completely indulged in the topic. I always motivate them for their good attempts.My students always get exam questions from my test series. Success can achieve if student retain the topics and do a lot of practice from previous year question for the examination going to appear for. My motto If soldiers sweat in practice then no need to bleed in the war. Do more and more practice. That only give you success.
Amrita Ma'am is an exceptional chemistry teacher. My daughter's grades improved significantly after attending her group classes, and we are very impressed with her clear and effective teaching style.
Top Tutor
Uttam Nagar, Delhi
4 yrs of
Exp
2 students
312 hrs of classes completed
500
per hour
Online Classes
Tutor's home
practical n theory base
Top Tutor
HSR Layout 1st Sector, Bangalore
11 yrs of
Exp
25 students
2027 hrs of classes completed
400
per hour
Student's Home
I am a B.TECH. graduate from computer science.I am completely dedicated in teaching .I have experience of 10 years in teaching field. In that 10 years, I have taught 180 students(1 on 1)as a tutor.I have experience of teaching all types of boards like (CBSE,ICSE,IGCSE, ISC,STATE BOARD,IB) .My specialisation is in mathematics subject.I teach mathematics from 7th grade to 12th grade.I keep patience while teaching to the students,I try my best to clear the concepts regarding that chapter either in maths.Student can ask their doubts many times until their concepts is not clear.I have given good results to the students and also generated confidence in them specially in mathematics. I am the best for teaching maths subject. I first try to understand the student ( weakness and strength) and then I plan how to make any student best in math. I teach with full dedication and create interest for maths subject in my students. Thanks.
