Embedded Systems Training near me in Hyderabad, India

I have been working as a assistant professor in ECE since 4 years from Sri Indu Institute of Engineering and technology & Vignan institute of management and technology for women......I can teach almost all ECE subjects.....my research interests are Embedded Systems. ..

I have total 10 years of teaching experience. I can take home tuition's for VIII,IX,X,XII. Basically I will teach Maths, Physics and Chemistry for higher classes and all subjects for lower classes.

I am an EMBEDDED DEVELOPER and TRAINER. I do DIPLOMA/B.TECH Academic projects. I have 7 years of work experience in Embedded field. My key skills are Hardware development. I am very much passionate about doing new projects in embedded field, Over the years i have helped thousands of students in various new projects and taught them. I have attended workshops in various colleges.

Erotech solutions established in 2014 by founder Mr Y. Seshananda Reddy, who had substantial experience in training from last ten years. We trained 250 + students and place students in different locations like Bangalore, Chennai, Pune, Gujarat and Hyderabad. Our Training center located near J.N.T.U Kukatpally, Hyderabad. We have exposure with skills, Assembly language, C, Advanced C, Firmware development, Protocols, I2C, SPI, CAN, Python programming language, Raspberry Pi, ARM architecture, Linux system programming, Linux Network programming, Kernel image build, Device driver programming, IoT applications. We implemented Govt of India schemes.

I am an trainer for Embedded Linux kernel Device Driver , course content includes linux core internal programming, kernel module programming, cahracter ,block and network device driver. Also provide hands on training on Embedded Linux Development(ARM) and debugging techniques. Other relavant content PCI , SPI , CAN protocol for Automation USB character and block device driver development.

I have been working with development and training on embedded systems software development

I am an electronics engineer I have experience in embedded automotive development & testing. I have experience in verification & validation & hil testing. I am certified in embedded systems from vector india institute hyderabad. My key skills are c, embedded c,can,uds,canoe, canalyzer,i2c,spi protocols. For automotive testing I will give online or offline classes

I am an Embedded Engineer working in IT Company since 2015. My key skills are Embedded C, Python Language, Machine Learning, Convolutional Neural Networks, ARM Programming and Hardware Designing.

Niltech Edu is part of a product development company offering 100% Job Guarantee Training Programmes. Here you learn from Real Developers who build products for organisations like DRDO, Indian Army, Airforce and many more. At Niltech Edu our curriculum is designed keeping Corporate Job Requirements in consideration.

I have done projects on vlsi stream.I have completed my vlsi front end design and have certified in it.I have done projects in Btech final year.

Over 7.5 years of experience as Embedded Engineer/Developer/trainer and Robotics trainer/ developer with responsibilities involving design, development, porting, integration and testing of embedded systems and robotics. Strong knowledge on developing robots like line following robot, firefighting robot, pick and place robots, autonomous robots for specific applications. Strong Knowledge on Designing Lego mindstroms nxt and EV3 based robots. Creatively designed new concepts for understanding STEM concepts. Guided students for National competitions like IRO (Indian Robotics Olympiad) graduates for state level and national level robotic competitions. Trained Engineering graduates on Designing robots for Tech-fests national robotic competitions. Designed robots based on Raspberry pi like face detecting robot. Extensive knowledge on Robotic events held in schools and colleges at national and international level. Familiarity with wide verity of industrial and educational robots. Attended robotic conferences and live events in colleges. Successfully conducted summer camps on Lego mindstroms robotics.

With over 12 years of experience in VLSI embedded systems and PC Design, I have developed a deep understanding of the intricacies of these technologies. Holding a master's degree in VLSI, I began my career as a senior engineer in Bangalore, where I worked for three years. My industry experience has provided me with a strong technical foundation, which I now bring into my role as a freelance trainer. Over the past 9 years, I have dedicated myself to mentoring students and professionals, helping them master the skills necessary to excel in the field of VLSI and embedded systems. As a trainer, I have had the privilege of guiding numerous students toward successful careers. Many of my students have gone on to secure positions in prestigious companies, thanks to the practical knowledge and hands-on experience gained through my courses. I believe that true learning happens when theory meets application, which is why I emphasize an interactive and practical approach in all my training sessions. I offer both online and offline classes, with courses ranging from 1 month to 4 months, depending on the depth of the subject and the student's goals. Each session is designed to be engaging, with a mix of theory and real-world applications. My one-hour classes are structured to ensure maximum learning in a limited time, allowing students to grasp complex concepts efficiently. To enhance the learning experience, I use detailed PowerPoint presentations that simplify technical concepts, making them easier to understand. Additionally, I provide assignments that reinforce the knowledge gained during the sessions. These assignments are tailored to simulate real-world challenges that students may face in their careers, ensuring they are well-prepared for the job market. Throughout the course, students receive comprehensive learning materials, both in soft and hard copy formats. These include notes, guides, and resources that they can refer to even after completing the course. I believe in equipping my students with all the tools they need to continue learning and growing in their field, even after our sessions are over. My goal is to help students bridge the gap between academic knowledge and industry requirements. By providing personalized attention and a practical approach to learning, I strive to ensure that each student leaves my course with the skills and confidence to succeed in the competitive field of VLSI embedded systems and PC Design.

Embedded Hash is a leading provider of embedded systems institute training, staffing, and Servicing solutions. We have been providing these services for more than 10 + years, and have a well-established reputation for excellence. Our customers include major corporations in aerospace and defense, automotive, security, and financial services. Our team has a wide range of experience and skills, which means we can offer a complete range of services from design and development to testing and certification. We also provide training courses for embedded systems engineers, hardware designers, and software developers.

With 25+ years of experience across IBM, HP, and KPIT Cummins, I bring deep expertise in Embedded Systems development and Embedded C programming. At IBM, I contributed to advanced firmware design, memory controllers, and secure boot protocols. During my tenure at HP, I focused on hardware-software integration, optimized network stacks, and real-time performance tuning. At KPIT Cummins, I developed automotive ECU firmware, SCADA systems, and worked extensively with CAN protocols for industrial automation. My teaching covers key topics like microcontrollers (ARM, STM32), RTOS, device drivers, memory management, and interrupt handling. I emphasize real-world applications through hands-on projects with platforms such as Arduino, Raspberry Pi, and STM32, helping students bridge the gap between theory and practice. I’ve also worked on robotics, brain-computer interfaces (BCI), and IoT solutions for healthcare, showcasing my expertise in advanced embedded technologies. Whether you are a beginner or a professional, I offer personalized lessons, career mentoring, and interview preparation. Join me on UrbanPro to master Embedded Systems with affordable, flexible classes, practical projects, and real-world insights. Contact me for a free demo session and unlock new opportunities in embedded technology.

Have 8+ years of experience in conducting embedded c training sessions for students, corporate employees.

I am an IOT professional currently working for a reputed firm engaged firmly in IOT and IOT Cyber security consultancy. I am a technical leader in the organization and have about 14 years of experience in Embedded/Firmware,device drivers, C.C++, Consumer electronics and medical domains. I am currently engaged in development of cutting egde use cases for medical and health care sector and in IIOT(Industrial IOT). My experience has been in Micro-controllers/Processors programming and development. I have been teaching skills in my organization on IOT for the last two years sporadically and would like to delve more deeply into the teaching field. I am also currently engaged in working out solutions for the agri field using IOT technologies. Interested in latest technologies viz. LoRa/LoraWan, 5g etc and currently working on some of them in a practical way.

I am pcb designer .I am giving home ,online and tutor home Tuition. I am having 4yrs of experience in pcb designing Schematic drawing ,pcb layout, Gerber generation (DFM,EMI,EMC)

Embedded engineer with 8 years of experience in Firmware, Bare metal drivers, ARM processors, KEIL, Embedded C, HW design, RDMA, NVMEoF, I2C, SPI, UART, Timers and counters, PWM

Embedded Software Engineer with 7 years of experience in designing, implementing, integrating, debugging and optimizing firmware for embedded applications like Smart Energy Meters, HVAC Systems & Inkjet Printers. Experienced in Embedded C/C++, ARM Cortex-M0+/M4, Bare metal firmware, RTOS, driver development, signal acquisition, and real-time processing. Hands-on experience with power-system measurement devices, Rogowski coil sensing, ADC-driven harmonic analysis, and firmware for metrology applications. Worked closely with hardware and low level system firmware, supporting HW-SW integration, bring up and validation in Linux-based development environments.

We provide training on Embedded Linux Development . Course includes, Embedded Linux, Linux System Programming, Embedded C, Linux Device Drivers, Debugging Techniques and Real-time projects.Course is taught from the very basic level, including all the pre-requisites. High-end hardware is available for LABs and projects. We also provide academic projects for M.Tech students. In the ocean of hundreds of training institutes residing in Hyderabad, Kernel Masters emerges as a unique training Institute that provides complete practical oriented real-time project based Quality education in the domain of Embedded Systems. Right from the beginning, each command, each and every concept of Embedded Systems is demonstrated practically on the most advanced hardware environment and students get to do the practicals on the same hardware during lab. Electronics has been one such subject where practicals has more importance than anything else. KM is equipped with the right kind of expertise and environment for every student to excel. Every student is equally important for us.

9 years of working experience with 2 years of teaching experience in embedded system design

I am an Electronics Engineer , I am working as a Hardware Engineer.I have 2 years of experience in PCB designing , Writing Drivers for 8bit microcontrollers, Circuit Designing, Designed Customized boards for Bluetooth and Thread technology.Experience in Proteus, KiCAD, Altium simulation and Designing Tools.

Embedded Systems Engineer with 11+ years of industry experience. Passionate about teaching and mentoring students in Embedded C, ARM Cortex-M, RTOS concepts, Linux programming. Believe in hands-on approach as this field is very hands on. I enjoy helping students gain confidence in embedded systems through clear explanations and hands-on examples.

I had 5 years of teaching experience in engineering colleges and more then 10+ years experience in real time embedded systems. I have strong in programming c and c++.