Find the best tutors and institutes for Class 12 Tuition
Q3.8:
In a pseudo first order reaction in water, the following results were obtained:

Calculate the average rate of reaction between the time interval 30 to 60 seconds.
In a pseudo first order reaction in water, the following results were obtained:

Calculate the average rate of reaction between the time interval 30 to 60 seconds.
Solution :
Step 1: Identifying the Given Data
From the provided experimental data set, we extract the reactant concentration $[R]$ at the specified time intervals $t_1 = 30\text{ s}$ and $t_2 = 60\text{ s}$:
| Time $t$ (s) | $[R]$ (M) |
|---|---|
| 30 | $0.17$ |
| 60 | $0.085$ |
Step 2: Defining the Average Rate Formula
The average rate of a reaction is defined as the change in concentration of the reactant over a specific time interval. Mathematically, it is expressed as:
$\text{Average Rate} = -\frac{\Delta[R]}{\Delta t} = -\frac{[R]_2 - [R]_1}{t_2 - t_1}$
[Per the definition of average reaction rate in chemical kinetics]
Step 3: Executing Algebraic Substitution
Substitute the identified values into the rate equation:
$\Delta[R] = [R]_2 - [R]_1 = 0.085\text{ M} - 0.17\text{ M} = -0.085\text{ M}$
$\Delta t = t_2 - t_1 = 60\text{ s} - 30\text{ s} = 30\text{ s}$
Step 4: Final Calculation
$\text{Average Rate} = -\left( \frac{-0.085\text{ M}}{30\text{ s}} \right)$
$\text{Average Rate} = \frac{0.085}{30}\text{ M s}^{-1}$
$\text{Average Rate} = 0.002833\text{ M s}^{-1}$
Expressing the result in scientific notation for precision:
$\text{Average Rate} = 2.833 \times 10^{-3}\text{ M s}^{-1}$
Final Solution: The average rate of reaction between 30 and 60 seconds is $2.833 \times 10^{-3}\text{ M s}^{-1}$.
More Questions from Class 12 Chemistry Chemical Kinetics Exercises
- Q3.1 (i): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (i) (3NO(g) \rightarrow N_{2}O (g)) Rate = (k[NO]^{2})
- Q3.1 (ii): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (ii) (H_{2}O_{2} (aq) + 3I^{-} (aq) + 2H^{+} \rightarrow 2H_{2}O (l) + I_{3}^{-}) Rate = (k[H_{2}O_{2}][I^{-}])
- Q3.1 (iii): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (iii) (CH_{3}CHO (g) \rightarrow CH_{4} (g) + CO(g)) Rate = (k [CH_{3}CHO]^{3/2})
- Q3.1 (iv): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (iv) (C_{2}H_{5}Cl (g) \rightarrow C_{2}H_{4} (g) + HCl (g)) Rate = (k [C_{2}H_{5}Cl])
- Q3.1(i): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (i) \(3NO(g) \rightarrow N_{2}O (g)\) Rate = \(k[NO]^{2}\)
- Q3.1(ii): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (ii) \(H_{2}O_{2} (aq) + 3I^{-} (aq) + 2H^{+} \rightarrow 2H_{2}O (l) + I_{3}^{-}\) Rate = \(k[H_{2}O_{2}][I^{-}]\)
- Q3.1(iii): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (iii) \(CH_{3}CHO (g) \rightarrow CH_{4} (g) + CO(g)\) Rate = \(k [CH_{3}CHO]^{\frac{3}{2}}\)
- Q3.1(iv): From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (iv) \(C_{2}H_{5}Cl (g) \rightarrow C_{2}H_{4} (g) + HCl (g)\) Rate = \(k [C_{2}H_{5}Cl]\)
- Q3.10: In a reaction between (A) and (B), the initial rate of reaction ((r_{0})) was measured for different initial concentrations of (A) and (B) as given below: What is the order of the reaction with respect to (A) and (B)?
- Q3.10: In a reaction between \(A\) and \(B\), the initial rate of reaction (\(r_{0}\)) was measured for different initial concentrations of \(A\) and \(B\) as given below: What is the order of the reaction with respect to \(A\) and \(B\)?
- Q3.11: The following results have been obtained during the kinetic studies of the reaction: (2A + B \rightarrow C + D) Determine the rate law and the rate constant for the reaction.
- Q3.11: The following results have been obtained during the kinetic studies of the reaction: \(2A + B \rightarrow C + D\) Determine the rate law and the rate constant for the reaction.
- Q3.12: The reaction between (A) and (B) is first order with respect to (A) and zero order with respect to (B). Fill in the blanks in the following table:
- Q3.12: The reaction between \(A\) and \(B\) is first order with respect to \(A\) and zero order with respect to \(B\). Fill in the blanks in the following table:
- Q3.13 (i): Calculate the half-life of a first order reaction from their rate constants given below: (i) (200 s^{-1})
- Q3.13 (ii): Calculate the half-life of a first order reaction from their rate constants given below: (ii) (2 min^{-1})
- Q3.13 (iii): Calculate the half-life of a first order reaction from their rate constants given below: (iii) (4 years^{-1})
- Q3.13(i): Calculate the half-life of a first order reaction from their rate constants given below: (i) \(200 s^{-1}\)
- Q3.13(ii): Calculate the half-life of a first order reaction from their rate constants given below: (ii) \(2 min^{-1}\)
- Q3.13(iii): Calculate the half-life of a first order reaction from their rate constants given below: (iii) \(4 years^{-1}\)
- Q3.14: The half-life for radioactive decay of (^{14}C) is 5730 years. An archaeological artifact containing wood had only 80% of the (^{14}C) found in a living tree. Estimate the age of the sample.
- Q3.14: The half-life for radioactive decay of \(^{14}C\) is 5730 years. An archaeological artifact containing wood had only 80% of the \(^{14}C\) found in a living tree. Estimate the age of the sample.
- Q3.15 (i): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: t/s 0 400 800 1200 1600 2000 2400 2800 3200 (10^{2} \times [N_{2}O_{5}])/(mol L^{-1}) 1.63 1.36 1.14 0.93 0.78 0.64 0.53 0.43 0.35 (i) Plot ([N_{2}O_{5}]) against (t).
- Q3.15 (ii): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: (ii) Find the half-life period for the reaction.
- Q3.15 (iii): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: (iii) Draw a graph between (\log[N_{2}O_{5}]) and (t).
- Q3.15 (iv): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: (iv) What is the rate law ?
- Q3.15 (v): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: (v) Calculate the rate constant.
- Q3.15 (vi): The experimental data for decomposition of (N_{2}O_{5}) [(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2})] in gas phase at 318K are given below: (vi) Calculate the half-life period from (k) and compare it with (ii).
- Q3.15(i): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (i) Plot \([N_{2}O_{5}]\) against \(t\).
- Q3.15(ii): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (ii) Find the half-life period for the reaction.
- Q3.15(iii): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (iii) Draw a graph between \(log[N_{2}O_{5}]\) and \(t\).
- Q3.15(iv): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (iv) What is the rate law ?
- Q3.15(v): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (v) Calculate the rate constant.
- Q3.15(vi): The experimental data for decomposition of \(N_{2}O_{5}\) [\(2N_{2}O_{5} \rightarrow 4NO_{2} + O_{2}\)] in gas phase at 318K are given below: (vi) Calculate the half-life period from \(k\) and compare it with (ii).
- Q3.16: The rate constant for a first order reaction is \(60 s^{-1}\). How much time will it take to reduce the initial concentration of the reactant to its \(\frac{1}{16}\)th value?
- Q3.16: The rate constant for a first order reaction is (60 s^{-1}). How much time will it take to reduce the initial concentration of the reactant to its (\frac{1}{16}^{th}) value?
- Q3.17: During nuclear explosion, one of the products is \(^{90}Sr\) with half-life of 28.1 years. If \(1 \mu g\) of \(^{90}Sr\) was absorbed in the bones of a newly born baby instead of calcium, how much of it will remain after 10 years and 60 years if it is not lost metabolically.
- Q3.17: During nuclear explosion, one of the products is (^{90}Sr) with half-life of 28.1 years. If (1\mu g) of (^{90}Sr) was absorbed in the bones of a newly born baby instead of calcium, how much of it will remain after 10 years and 60 years if it is not lost metabolically.
- Q3.18: For a first order reaction, show that time required for 99% completion is twice the time required for the completion of 90% of reaction.
- Q3.18: For a first order reaction, show that time required for 99% completion is twice the time required for the completion of 90% of reaction.
- Q3.19: A first order reaction takes 40 min for 30% decomposition. Calculate \(t_{1/2}\).
- Q3.19: A first order reaction takes 40 min for 30% decomposition. Calculate (t_{1/2}).
- Q3.2: For the reaction: (2A + B \rightarrow A_{2}B) the rate = (k[A][B]^{2}) with (k = 2.0 \times 10^{-6} mol^{-2} L^{2} s^{-1}). Calculate the initial rate of the reaction when ([A] = 0.1 mol L^{-1}), ([B] = 0.2 mol L^{-1}). Calculate the rate of reaction after ([A]) is reduced to (0.06 mol L^{-1}).
- Q3.2: For the reaction: \(2A + B \rightarrow A_{2}B\) the rate = \(k[A][B]^{2}\) with \(k = 2.0 \times 10^{-6} mol^{-2} L^{2} s^{-1}\). Calculate the initial rate of the reaction when \([A] = 0.1 \text{ mol } L^{-1}\), \([B] = 0.2 \text{ mol } L^{-1}\). Calculate the rate of reaction after \([A]\) is reduced to \(0.06 \text{ mol } L^{-1}\).
- Q3.20: For the decomposition of azoisopropane to hexane and nitrogen at 543 K, the following data are obtained. Calculate the rate constant.
- Q3.20: For the decomposition of azoisopropane to hexane and nitrogen at 543 K, the following data are obtained. Calculate the rate constant.
- Q3.21: The following data were obtained during the first order thermal decomposition of (SO_{2}Cl_{2}) at a constant volume. ((SO_{2}Cl_{2}(g) \rightarrow SO_{2}(g) + Cl_{2}(g))) Calculate the rate of the reaction when total pressure is 0.65 atm.
- Q3.21: The following data were obtained during the first order thermal decomposition of \(SO_{2}Cl_{2}\) at a constant volume. \(SO_{2}Cl_{2}(g) \rightarrow SO_{2}(g) + Cl_{2}(g)\) Calculate the rate of the reaction when total pressure is 0.65 atm.
- Q3.22: The rate constant for the decomposition of \(N_{2}O_{5}\) at various temperatures is given below: Draw a graph between \(ln k\) and \(1/T\) and calculate the values of \(A\) and \(E_{a}\). Predict the rate constant at 30° and 50°C.
- Q3.22: The rate constant for the decomposition of (N_{2}O_{5}) at various temperatures is given below: Draw a graph between (\ln k) and (1/T) and calculate the values of (A) and (E_{a}). Predict the rate constant at 30° and 50°C.
- Q3.23: The rate constant for the decomposition of hydrocarbons is (2.418 \times 10^{-5}s^{-1}) at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.
- Q3.23: The rate constant for the decomposition of hydrocarbons is \(2.418 \times 10^{-5}s^{-1}\) at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.
- Q3.24: Consider a certain reaction (A \rightarrow Products) with (k = 2.0 \times 10^{-2}s^{-1}). Calculate the concentration of (A) remaining after 100 s if the initial concentration of (A) is (1.0 mol L^{-1}).
- Q3.24: Consider a certain reaction \(A \rightarrow Products\) with \(k = 2.0 \times 10^{-2}s^{-1}\). Calculate the concentration of \(A\) remaining after 100 s if the initial concentration of \(A\) is \(1.0 mol L^{-1}\).
- Q3.25: Sucrose decomposes in acid solution into glucose and fructose according to the first order rate law, with \(t_{1/2} = 3.00\) hours. What fraction of sample of sucrose remains after 8 hours ?
- Q3.25: Sucrose decomposes in acid solution into glucose and fructose according to the first order rate law, with (t_{1/2} = 3.00) hours. What fraction of sample of sucrose remains after 8 hours ?
- Q3.26: The decomposition of hydrocarbon follows the equation \(k = (4.5 \times 10^{11}s^{-1}) e^{-28000K/T}\) Calculate \(E_{a}\).
- Q3.26: The decomposition of hydrocarbon follows the equation (k = (4.5 \times 10^{11}s^{-1}) e^{-28000K/T}) Calculate (E_{a}).
- Q3.27: The rate constant for the first order decomposition of \(H_{2}O_{2}\) is given by the following equation: \(log k = 14.34 – \frac{1.25 \times 10^{4}K}{T}\) Calculate \(E_{a}\) for this reaction and at what temperature will its half-period be 256 minutes?
- Q3.27: The rate constant for the first order decomposition of (H_{2}O_{2}) is given by the following equation: (\log k = 14.34 – 1.25 \times 10^{4}K/T) Calculate (E_{a}) for this reaction and at what temperature will its half-period be 256 minutes?
- Q3.28: The decomposition of (A) into product has value of (k) as (4.5 \times 10^{3} s^{-1}) at 10°C and energy of activation (60 kJ mol^{-1}). At what temperature would (k) be (1.5 \times 10^{4}s^{-1})?
- Q3.28: The decomposition of \(A\) into product has value of \(k\) as \(4.5 \times 10^{3} s^{-1}\) at 10°C and energy of activation \(60 kJ mol^{-1}\). At what temperature would \(k\) be \(1.5 \times 10^{4}s^{-1}\)?
- Q3.29: The time required for 10% completion of a first order reaction at 298K is equal to that required for its 25% completion at 308K. If the value of \(A\) is \(4 \times 10^{10}s^{-1}\). Calculate \(k\) at 318K and \(E_{a}\).
- Q3.29: The time required for 10% completion of a first order reaction at 298K is equal to that required for its 25% completion at 308K. If the value of (A) is (4 \times 10^{10}s^{-1}). Calculate (k) at 318K and (E_{a}).
- Q3.3: The decomposition of \(NH_{3}\) on platinum surface is zero order reaction. What are the rates of production of \(N_{2}\) and \(H_{2}\) if \(k = 2.5 \times 10^{-4} mol^{-1} L s^{-1}\)?
- Q3.3: The decomposition of (NH_{3}) on platinum surface is zero order reaction. What are the rates of production of (N_{2}) and (H_{2}) if (k = 2.5 \times 10^{-4} mol^{-1} L s^{-1})?
- Q3.30: The rate of a reaction quadruples when the temperature changes from 293 K to 313 K. Calculate the energy of activation of the reaction assuming that it does not change with temperature.
- Q3.30: The rate of a reaction quadruples when the temperature changes from 293 K to 313 K. Calculate the energy of activation of the reaction assuming that it does not change with temperature.
- Q3.4: The decomposition of dimethyl ether leads to the formation of (CH_{4}), (H_{2}) and (CO) and the reaction rate is given by Rate = (k [CH_{3}OCH_{3}]^{3/2}) The rate of reaction is followed by increase in pressure in a closed vessel, so the rate can also be expressed in terms of the partial pressure of dimethyl ether, i.e., (Rate = p_{CH_{3}OCH_{3}}^{3/2}) If the pressure is measured in bar and time in minutes, then what are the units of rate and rate constants?
- Q3.4: The decomposition of dimethyl ether leads to the formation of \(CH_{4}\), \(H_{2}\) and \(CO\) and the reaction rate is given by Rate = \(k [CH_{3}OCH_{3}]^{\frac{3}{2}} The rate of reaction is followed by increase in pressure in a closed vessel, so the rate can also be expressed in terms of the partial pressure of dimethyl ether, i.e., Rate = \(k(p_{CH_{3}OCH_{3}})^{\frac{3}{2}} If the pressure is measured in bar and time in minutes, then what are the units of rate and rate constants?
- Q3.5: Mention the factors that affect the rate of a chemical reaction.
- Q3.5: Mention the factors that affect the rate of a chemical reaction.
- Q3.6 (i): A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is (i) doubled
- Q3.6 (ii): A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is (ii) reduced to half ?
- Q3.6(i): A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is (i) doubled
- Q3.6(ii): A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is (ii) reduced to half ?
- Q3.7: What is the effect of temperature on the rate constant of a reaction? How can this effect of temperature on rate constant be represented quantitatively?
- Q3.7: What is the effect of temperature on the rate constant of a reaction? How can this effect of temperature on rate constant be represented quantitatively?
- Q3.8: In a pseudo first order reaction in water, the following results were obtained: Calculate the average rate of reaction between the time interval 30 to 60 seconds.
- Q3.9 (i): A reaction is first order in (A) and second order in (B). (i) Write the differential rate equation.
- Q3.9 (ii): A reaction is first order in (A) and second order in (B). (ii) How is the rate affected on increasing the concentration of (B) three times?
- Q3.9 (iii): A reaction is first order in (A) and second order in (B). (iii) How is the rate affected when the concentrations of both (A) and (B) are doubled?
- Q3.9(i): A reaction is first order in \(A\) and second order in \(B\). (i) Write the differential rate equation.
- Q3.9(ii): A reaction is first order in \(A\) and second order in \(B\). (ii) How is the rate affected on increasing the concentration of \(B\) three times?
- Q3.9(iii): A reaction is first order in \(A\) and second order in \(B\). (iii) How is the rate affected when the concentrations of both \(A\) and \(B\) are doubled?
CBSE Solutions for Class 12 Chemistry Chemical Kinetics
Chapters in CBSE - Class 12 Chemistry
Top Tutors who teach Chemical Kinetics
I have done b.Tech in electrical engineering from IIT KANPUR. I taught one year in akash institute patna, 2 years in fiitjee patna. Currently I am teaching in unacademy. I have taught more than 6000 jee and neet aspirants. In which more than 500 students are selected in iitand aiims. If some one is interested to improve their physics upto jee advanced level take help with me .And see the magic. I can help students in their all type of assignment from any institute like allen, fiitjee, narayna, akash, resonance. I can help students to solve both volume of h.C verma within two month if some one is intrested in solving I.E.Irodov join me and see the next level of physics My way of teaching is so easy and so advanced that student will realyy enjoy it. Don't waste your time in making decision just join and experience my level
He is a very nice teacher, has a lot of clarity in what he teaches, and is motivating. He uses nice Gen Z lingo. Thanks to him, I am able to be in touch with CBSE Maths despite studying for NEET.
I always feel, class 12 tution is the major step to any student, so it is very important to be attentive with time and energy to be able to put best efforts to achieve desired goals.
I am working as an Assistant Professor in the Department of Civil and Engineering at Hindustan College of Science and Technology, Mathura. I completed my post-graduation with Honours in Geotechnical and Geo-environmental engineering from Kamla Nehru Institute of Technology (KNIT), Sultanpur in 2016. Since then i engaged in teaching and Research work, I taught many civil engineering Subjects basically, Geotechnical Engineering, Foundation Design, Strength of Material, Structure, Fluid Mechanics, Survey, Hydraulic and Hydraulics Machines. Having 5 years of experience gives me major exposure for being a professional tutor and mentor for the development of students.
I am Dr. Shivaprasad Shetty, a Chemistry educator with over 17 years of teaching experience, specializing in Class 12 Chemistry. Teaching has been a long-standing commitment for me, and I focus on helping students develop strong conceptual understanding, analytical thinking, and confidence in the subject. My approach is centered on making Chemistry clear, structured, and easy to apply in examinations. I hold a Doctor of Philosophy (Ph.D.) in Chemistry, which has provided me with advanced academic knowledge and research-based understanding of the subject. My academic training enables me to explain complex chemical concepts with clarity, precision, and depth, ensuring that students build a strong foundation in the subject. Over the years, I have worked as a Chemistry teacher at the college level and have accumulated more than 15 years of teaching experience. During this time, I have consistently delivered strong academic results and received positive feedback from students. I take pride in guiding learners toward better understanding and improved performance in their examinations. My teaching experience has allowed me to work with students of varying academic abilities, helping them overcome challenges in Chemistry and develop confidence in problem-solving. I focus on simplifying difficult topics and ensuring that students grasp the core concepts before moving on to advanced applications. My teaching methodology is based on structured lesson planning with clear objectives for each session. I ensure that every topic is taught in a systematic manner, beginning with fundamentals and gradually progressing to higher-level understanding. I strongly believe that clarity in basics is essential for mastering Chemistry. My classes are interactive and concept-oriented, encouraging students to actively participate and engage with the subject. I also incorporate practical-based explanations and real-life applications wherever possible, which helps students connect theoretical concepts with practical understanding and improves retention. I conduct online classes and use PowerPoint presentations along with whiteboard teaching to make lessons more effective and visually clear. My goal is to create a focused and supportive learning environment where students can strengthen their understanding of Chemistry and achieve academic success with confidence.
Excellent teaching with good clarity . It is interesting and interactive. Easy to understand and classes are having good content with good teaching methodology
I am a teacher. I love teaching and want to share my knowledge with my students. I will take online classes. My approach combines clear concepts, regular practice, and student-friendly strategies to make learning effective and enjoyable.
"Found it to be a very intuitive learning methodology, practical approach, helpful in understanding."
Other Subjects in CBSE - Class 12
Download free CBSE - Class 12 Chemistry Chemical Kinetics Exercises worksheets
Download Now