Find the best tutors and institutes for Class 11 Tuition
Q9.7:
Four identical hollow cylindrical columns of mild steel support a big structure of mass 50,000 kg. The inner and outer radii of each column are 30 and 60 cm respectively. Assuming the load distribution to be uniform, calculate the compressional strain of each column.
Solution :
Step 1: Given Variables & Theoretical Foundation
To determine the compressional strain ($\epsilon$), we utilize Hooke’s Law in the context of axial loading: $\sigma = Y \cdot \epsilon$, where $\sigma$ is the stress, $Y$ is Young's Modulus, and $\epsilon$ is the strain. The stress is defined as the ratio of force ($F$) to the cross-sectional area ($A$).
- Total Mass ($M$) = $50,000 \text{ kg}$
- Number of columns ($n$) = $4$
- Inner radius ($r$) = $30 \text{ cm} = 0.3 \text{ m}$
- Outer radius ($R$) = $60 \text{ cm} = 0.6 \text{ m}$
- Acceleration due to gravity ($g$) = $9.8 \text{ m/s}^2$
- Young’s Modulus for mild steel ($Y$) $\approx 2.0 \times 10^{11} \text{ Pa}$ [Standard physical constant]
Step 2: Calculating Force and Area
First, calculate the total weight ($W$) supported by the structure:
$W = M \cdot g = 50,000 \text{ kg} \times 9.8 \text{ m/s}^2 = 490,000 \text{ N}$
Since the load is distributed uniformly across four columns, the force ($F$) per column is:
$F = \frac{W}{4} = \frac{490,000}{4} = 122,500 \text{ N}$
The cross-sectional area ($A$) of each hollow cylinder is defined by the annulus formula:
$A = \pi(R^2 - r^2) = \pi((0.6)^2 - (0.3)^2)$
$A = \pi(0.36 - 0.09) = \pi(0.27) \approx 0.8482 \text{ m}^2$
Step 3: Calculating Compressional Stress and Strain
The stress ($\sigma$) on each column is given by:
$\sigma = \frac{F}{A} = \frac{122,500}{0.8482} \approx 144,423.5 \text{ Pa}$
By Hooke’s Law [Per the linear elastic deformation model]:
$\epsilon = \frac{\sigma}{Y} = \frac{144,423.5}{2.0 \times 10^{11}}$
$\epsilon \approx 7.22 \times 10^{-7}$
Step 4: Schematic Diagram of the Cross-Section
Summary Data
| Parameter | Value |
|---|---|
| Force per column ($F$) | $1.225 \times 10^5 \text{ N}$ |
| Area per column ($A$) | $0.8482 \text{ m}^2$ |
| Compressional Strain ($\epsilon$) | $7.22 \times 10^{-7}$ |
Final Solution: The compressional strain for each column is approximately $7.22 \times 10^{-7}$ (dimensionless).
More Questions from Class 11 Physics Mechanical Properties of Solids EXERCISES
- Q8.1: A steel wire of length 4.7 m and cross-sectional area \(3.0 \times 10^{-5} \text{ m}^{2}\) stretches by the same amount as a copper wire of length 3.5 m and cross-sectional area of \(4.0 \times 10^{–5} \text{ m}^{2}\) under a given load. What is the ratio of the Young’s modulus of steel to that of copper?
- Q8.10: A rigid bar of mass 15 kg is supported symmetrically by three wires each 2.0 m long. Those at each end are of copper and the middle one is of iron. Determine the ratios of their diameters if each is to have the same tension.
- Q8.11: A 14.5 kg mass, fastened to the end of a steel wire of unstretched length 1.0 m, is whirled in a vertical circle with an angular velocity of 2 rev/s at the bottom of the circle. The cross-sectional area of the wire is \(0.065 \text{ cm}^{2}\). Calculate the elongation of the wire when the mass is at the lowest point of its path.
- Q8.12: Compute the bulk modulus of water from the following data: Initial volume = 100.0 litre, Pressure increase = 100.0 atm (\(1 \text{ atm} = 1.013 \times 10^{5} \text{ Pa}\)), Final volume = 100.5 litre. Compare the bulk modulus of water with that of air (at constant temperature). Explain in simple terms why the ratio is so large.
- Q8.13: What is the density of water at a depth where pressure is 80.0 atm, given that its density at the surface is \(1.03 \times 10^{3} \text{ kg m}^{–3}\)?
- Q8.14: Compute the fractional change in volume of a glass slab, when subjected to a hydraulic pressure of 10 atm.
- Q8.15: Determine the volume contraction of a solid copper cube, 10 cm on an edge, when subjected to a hydraulic pressure of \(7.0 \times 10^{6} \text{ Pa}\).
- Q8.16: How much should the pressure on a litre of water be changed to compress it by 0.10%? carry one quarter of the load.
- Q8.2 (a): Figure 8.9 shows the strain-stress curve for a given material. What are (a) Young’s modulus for this material?
- Q8.2 (b): Figure 8.9 shows the strain-stress curve for a given material. What are (b) approximate yield strength for this material?
- Q8.3 (a): The stress-strain graphs for materials A and B are shown in Fig. 8.10. The graphs are drawn to the same scale. (a) Which of the materials has the greater Young’s modulus?
- Q8.3 (b): The stress-strain graphs for materials A and B are shown in Fig. 8.10. The graphs are drawn to the same scale. (b) Which of the two is the stronger material?
- Q8.4 (a): Read the following two statements below carefully and state, with reasons, if it is true or false. (a) The Young’s modulus of rubber is greater than that of steel;
- Q8.4 (b): Read the following two statements below carefully and state, with reasons, if it is true or false. (b) The stretching of a coil is determined by its shear modulus.
- Q8.5: Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 8.11. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.
- Q8.6: The edge of an aluminium cube is 10 cm long. One face of the cube is firmly fixed to a vertical wall. A mass of 100 kg is then attached to the opposite face of the cube. The shear modulus of aluminium is 25 GPa. What is the vertical deflection of this face?
- Q8.7: Four identical hollow cylindrical columns of mild steel support a big structure of mass 50,000 kg. The inner and outer radii of each column are 30 and 60 cm respectively. Assuming the load distribution to be uniform, calculate the compressional strain of each column.
- Q8.8: A piece of copper having a rectangular cross-section of \(15.2 \text{ mm} \times 19.1 \text{ mm}\) is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain?
- Q8.9: A steel cable with a radius of 1.5 cm supports a chairlift at a ski area. If the maximum stress is not to exceed \(10^{8} \text{ N m}^{–2}\), what is the maximum load the cable can support ?
- Q9.1: A steel wire of length 4.7 m and cross-sectional area $3.0 \times 10^{-5} m^2$ stretches by the same amount as a copper wire of length 3.5 m and cross-sectional area of $4.0 \times 10^{-5} m^2$ under a given load. What is the ratio of the Young’s modulus of steel to that of copper?
- Q9.10: A rigid bar of mass 15 kg is supported symmetrically by three wires each 2.0 m long. Those at each end are of copper and the middle one is of iron. Determine the ratios of their diameters if each is to have the same tension.
- Q9.11: A 14.5 kg mass, fastened to the end of a steel wire of unstretched length 1.0 m, is whirled in a vertical circle with an angular velocity of 2 rev/s at the bottom of the circle. The cross-sectional area of the wire is $0.065 \text{ cm}^2$. Calculate the elongation of the wire when the mass is at the lowest point of its path.
- Q9.12: Compute the bulk modulus of water from the following data: Initial volume = 100.0 litre, Pressure increase = 100.0 atm (1 atm = $1.013 \times 10^5$ Pa), Final volume = 100.5 litre. Compare the bulk modulus of water with that of air (at constant temperature). Explain in simple terms why the ratio is so large.
- Q9.13: What is the density of water at a depth where pressure is 80.0 atm, given that its density at the surface is $1.03 \times 10^3 \text{ kg m}^{-3}$?
- Q9.14: Compute the fractional change in volume of a glass slab, when subjected to a hydraulic pressure of 10 atm.
- Q9.15: Determine the volume contraction of a solid copper cube, 10 cm on an edge, when subjected to a hydraulic pressure of $7.0 \times 10^6$ Pa.
- Q9.16: How much should the pressure on a litre of water be changed to compress it by 0.10%?
- Q9.2(a): Figure 9.11 shows the strain-stress curve for a given material. What are (a) Young’s modulus for this material?
- Q9.2(b): Figure 9.11 shows the strain-stress curve for a given material. What are (b) approximate yield strength for this material?
- Q9.3(a): The stress-strain graphs for materials A and B are shown in Fig. 9.12. The graphs are drawn to the same scale. (a) Which of the materials has the greater Young’s modulus?
- Q9.3(b): The stress-strain graphs for materials A and B are shown in Fig. 9.12. The graphs are drawn to the same scale. (b) Which of the two is the stronger material?
- Q9.4(a): Read the following two statements below carefully and state, with reasons, if it is true or false. (a) The Young’s modulus of rubber is greater than that of steel;
- Q9.4(b): Read the following two statements below carefully and state, with reasons, if it is true or false. (b) The stretching of a coil is determined by its shear modulus.
- Q9.5: Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 9.13. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.
- Q9.6: The edge of an aluminium cube is 10 cm long. One face of the cube is firmly fixed to a vertical wall. A mass of 100 kg is then attached to the opposite face of the cube. The shear modulus of aluminium is 25 GPa. What is the vertical deflection of this face?
- Q9.8: A piece of copper having a rectangular cross-section of $15.2 \text{ mm} \times 19.1 \text{ mm}$ is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain?
- Q9.9: A steel cable with a radius of 1.5 cm supports a chairlift at a ski area. If the maximum stress is not to exceed $10^8 \text{ N m}^{-2}$, what is the maximum load the cable can support ?
CBSE Solutions for Class 11 Physics Mechanical Properties of Solids
Chapters in CBSE - Class 11 Physics
Top Tutors who teach Mechanical Properties of Solids
Top Tutor
Jahangirpura, Surat
15 yrs of
Exp
3 students
3777 hrs of classes completed
250
per hour
Online Classes
Hello! I'm Ashish Bhatia, and a passionate educator with over 17 years of teaching experience in Maths and Science. My mission is to make learning engaging, and meaningful so that every student develops strong conceptual understanding along with the confidence to excel in examinations and beyond. Over the years, I have mentored students from diverse academic backgrounds, helping them improve not only their grades but also their analytical thinking, logical reasoning, and problem-solving abilities. My classes are designed to ensure that students truly understand concepts rather than memorize formulas. -------------Recognition & Achievements ---------- My commitment to quality teaching has been recognized by Urban Pro, where I have consistently been honoured as one of the Top 10 Tutors in 2024 and 2025. I have also earned the prestigious Top Tutor badge, reflecting consistently positive feedback from students and parents, strong teaching performance, and a proven track record of delivering excellent learning outcomes. The appreciation I receive from parents and students consistently highlights my ability to simplify difficult concepts, maintain engaging classes, encourage students to ask questions freely, and build their confidence in Mathematics and Science. I also prepare students for: • Board Examinations • School Assessments • MCQ Practice I teach students from: • CBSE • ICSE • Gujarat Board and other State Boards My online classes are attended by students from India as well as families living abroad who are looking for structured, high-quality academic support. --------------My Teaching Methodology ------------ Every class follows a systematic approach that focuses on learning, application, and continuous improvement. Step 1 – Concept Clarity Every topic is explained from the basics using digital whiteboards, visual illustrations, practical examples, and simple language. I ensure students understand the logic behind every concept before moving to problem-solving. Step 2 – Guided Practice Students actively solve problems during the class. Rather than simply providing answers, I encourage them to think critically, apply concepts, and develop independent problem-solving skills while receiving immediate feedback. Step 3 – Assessment & Reinforcement Learning is strengthened through: • Chapter-wise assignments • Regular practice worksheets • Weekly assessments • MCQ tests • Previous-year board questions • Doubt-solving sessions • Revision tests before examinations Regular performance analysis helps identify learning gaps early so that improvement is continuous. ------------Why Students & Parents Choose Me-------------- ✔ More than 17 years of teaching experience ✔ Recognized among Urban Pro's Top 10 Tutors (2024 & 2025) ✔ Urban Pro Super Tutor ✔ Concept-based teaching methodology ✔ Interactive live online classes ✔ Small batches for individual attention ✔ Personalized doubt-solving support ✔ Digital notes and study material ✔ Regular tests and performance tracking ✔ Board exam and competitive exam preparation ✔ Friendly, patient, and motivating teaching style My Teaching Philosophy I believe every student has the ability to excel when taught with the right approach. Success is not achieved through rote learning but through understanding concepts, practicing consistently, and developing confidence. My objective is to create independent learners who enjoy learning and can confidently tackle academic challenges. Book a Free Demo Class A free demo session allows students and parents to experience my teaching methodology before enrolling. During the demo session, I will: • Assess the student's current academic level. • Teach a topic through an interactive live class. • Identify conceptual strengths and learning gaps. • Suggest a personalized learning plan based on the student's goals. Whether your child needs help strengthening fundamentals, improving school performance, preparing for board examinations, or building confidence in Mathematics and Science, I am committed to providing structured, result-oriented, and engaging online learning. Let's build strong concepts today for a brighter academic future tomorrow. WHAT PARENTS & STUDENTS SAY ---------- Nothing reflects a teacher's impact better than the words of students and parents. Here's what some of them have shared about their learning experience with me on UrbanPro: "The teaching methodology is excellent. He explains the concepts with multiple real and live examples. My son liked his teaching very much." — Parent of a CBSE Class 7 student "The classes have been superb. Topics are being made easy to understand, maths is fun to study now. No matter how difficult the topic, Sir makes sure to make it simple and easy to understand." — CBSE Class 12 student "Ashish is an outstanding online Maths tutor. His teaching style is clear, patient and engaging. My child's grades and understanding of Mathematics have improved significantly." — Parent of a Class 8 student "He is very dedicated. My daughter is now able to understand the concepts easily." — Parent of a CBSE Class 10 student "Ashish Sir is very dedicated and always on time. He makes my son practice more problems during class. My son is now in the top five in his class." — Parent of a CBSE Class 11 student These reviews consistently highlight the qualities I strive to bring into every class—concept clarity, patience, interactive teaching, structured practice, and a genuine commitment to helping every student achieve their best academically.
Ashish Bhatia is very dedicated and always on time. He makes my son practice more problems during class, and because of this we have seen a lot of improvement in his performance. My son is now in the top five in his class.
Super Tutor
Mulund East, Mumbai
20 yrs of
Exp
6 students
598 hrs of classes completed
1500
per hour
Online Classes
Student's Home
Tutor's home
I have been teaching students for the last 20 years. Many of my students had passed with more than 95% marks or higher grade. I always love interactive classes so always motivate my students to ask as many questions as they can.Once the teaching process becomes dialogue from monologue then I understand that half of the task has been done and thereafter concept building process becomes very easy as I constantly guided by the questions from my students. Keeping class regularly on time, solving questions everyday, clearing doubts on a regular basis and lastly keeping weekly test make it very simple to make a good score.
His teaching methods are great. Very clear and concise. Always lectures with the intent to help you understand the material. He’s helped me understand content for chemistry and is one of the best teacher that I’ve had. Recommending her/him is a no brainer.
Top Tutor
Sector 92, Gurgaon
20 yrs of
Exp
4 students
1392 hrs of classes completed
1000
per hour
Online Classes
Student's Home
Tutor's home
Teaching since last 20 years
Very patient. Makes learning fun and productive. A seasoned and competent teacher. Makes a subject as mind-bogging as Math very easy to understand. Awesome experience!
Top Tutor
Padmanabhanagar, Bangalore
3 yrs of
Exp
550
per hour
Online Classes
Student's Home
Tutor's home
I am an experienced tutor with 4 years of experience in this field. I completed my BE in the year 2014. I have tutored students for Spoken English, BTech Tuition, C Language, C++ Language, CAD, CE and COMEDK Coaching. I can conduct classes at Student's Home, My place and Online via a different medium to students from International, CBSE, State, ICSE/ISC Board. I follow different techniques while teaching so, that my students are engaged positively. To make learning fun and easier, I use creative and innovative ideas.
Wonderful tutor with a great personality. Street smart way of tutoring. He covered PCM syllabus for std 12 in 4 months right from the basics. Now I am confident about giving my boards.
Top Tutor
Edapally, Kochi
1 yrs of
Exp
48 hrs of classes completed
500
per hour
Online Classes
Student's Home
Tutor's home
Qualified french teacher and tutor with a master degree in french from delhi university. Working as a language expert in ernst and young. Qualified. Have 4 years of teaching experience. With c1 certification.
Other Subjects in CBSE - Class 11
Download free CBSE - Class 11 Physics Mechanical Properties of Solids EXERCISES worksheets
Download Now
