Find the best tutors and institutes for Class 11 Tuition
Q10.24:
During blood transfusion the needle is inserted in a vein where the gauge pressure is 2000 Pa. At what height must the blood container be placed so that blood may just enter the vein ? [Use the density of whole blood from Table 10.1].
Solution :
Given Variables & Initial Setup
To determine the necessary height ($h$) for the blood container to overcome the gauge pressure within the vein, we utilize the principles of hydrostatics. The blood must exert a hydrostatic pressure equal to or greater than the vein's gauge pressure to initiate flow.
- Gauge pressure of the vein ($P_g$): $2000 \text{ Pa}$
- Density of human blood ($\rho$): $\approx 1.06 \times 10^3 \text{ kg/m}^3$ [Standard value from physical tables]
- Acceleration due to gravity ($g$): $9.8 \text{ m/s}^2$
Step 1: Establishing the Governing Equation
The pressure exerted by a column of fluid is defined by the hydrostatic pressure formula [Per Bernoulli's Principle in static condition]:
$P = \rho \cdot g \cdot h$
To ensure blood enters the vein, the pressure generated by the height of the blood column must balance the gauge pressure of the vein:
$\rho \cdot g \cdot h = P_g$
Step 2: Algebraic Rearrangement and Substitution
To solve for the height ($h$), we rearrange the equation:
$h = \frac{P_g}{\rho \cdot g}$
Substituting the given values into the equation:
$h = \frac{2000}{ (1.06 \times 10^3) \cdot 9.8 }$
Step 3: Numerical Computation
Perform the multiplication in the denominator:
$(1.06 \times 10^3) \cdot 9.8 = 1060 \cdot 9.8 = 10388 \text{ N/m}^3$
Perform the final division:
$h = \frac{2000}{10388} \approx 0.1925 \text{ m}$
Visual Representation of the Pressure Head
Conclusion and Conversion
The calculated height is approximately $0.1925 \text{ meters}$. Converting this to centimeters for clinical relevance:
$0.1925 \text{ m} \times 100 \text{ cm/m} = 19.25 \text{ cm}$
Final Solution: The blood container must be placed at a minimum height of approximately 0.193 m (or 19.3 cm) above the vein.
More Questions from Class 11 Physics Mechanical Properties of Fluids Additional Exercises
- Q10.21: A tank with a square base of area $1.0 m^2$ is divided by a vertical partition in the middle. The bottom of the partition has a small-hinged door of area $20 cm^2$. The tank is filled with water in one compartment, and an acid (of relative density 1.7) in the other, both to a height of 4.0 m. compute the force necessary to keep the door close.
- Q10.22(a): A manometer reads the pressure of a gas in an enclosure as shown in Fig. 10.25 (a) When a pump removes some of the gas, the manometer reads as in Fig. 10.25 (b) The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (a) Give the absolute and gauge pressure of the gas in the enclosure for cases (a) and (b), in units of cm of mercury.
- Q10.22(b): A manometer reads the pressure of a gas in an enclosure as shown in Fig. 10.25 (a) When a pump removes some of the gas, the manometer reads as in Fig. 10.25 (b) The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (b) How would the levels change in case (b) if 13.6 cm of water (immiscible with mercury) are poured into the right limb of the manometer ? (Ignore the small change in the volume of the gas).
- Q10.23: Two vessels have the same base area but different shapes. The first vessel takes twice the volume of water that the second vessel requires to fill upto a particular common height. Is the force exerted by the water on the base of the vessel the same in the two cases ? If so, why do the vessels filled with water to that same height give different readings on a weighing scale ?
- Q10.25(a): In deriving Bernoulli’s equation, we equated the work done on the fluid in the tube to its change in the potential and kinetic energy. (a) What is the largest average velocity of blood flow in an artery of diameter $2 \times 10^{-3} m$ if the flow must remain laminar ?
- Q10.25(b): In deriving Bernoulli’s equation, we equated the work done on the fluid in the tube to its change in the potential and kinetic energy. (b) Do the dissipative forces become more important as the fluid velocity increases ? Discuss qualitatively.
- Q10.26(a): (a) What is the largest average velocity of blood flow in an artery of radius $2 \times 10^{-3}m$ if the flow must remain lanimar?
- Q10.26(b): (b) What is the corresponding flow rate ? (Take viscosity of blood to be $2.084 \times 10^{-3} Pa s$).
- Q10.27: A plane is in level flight at constant speed and each of its two wings has an area of $25 m^2$. If the speed of the air is 180 km/h over the lower wing and 234 km/h over the upper wing surface, determine the plane’s mass. (Take air density to be $1 kg m^{-3}$).
- Q10.28: In Millikan’s oil drop experiment, what is the terminal speed of an uncharged drop of radius $2.0 \times 10^{-5} m$ and density $1.2 \times 10^3 kg m^{-3}$. Take the viscosity of air at the temperature of the experiment to be $1.8 \times 10^{-5} Pa s$. How much is the viscous force on the drop at that speed ? Neglect buoyancy of the drop due to air.
- Q10.29: Mercury has an angle of contact equal to $140^{\circ}$ with soda lime glass. A narrow tube of radius 1.00 mm made of this glass is dipped in a trough containing mercury. By what amount does the mercury dip down in the tube relative to the liquid surface outside ? Surface tension of mercury at the temperature of the experiment is $0.465 N m^{-1}$. Density of mercury = $13.6 \times 10^3 kg m^{-3}$.
- Q10.30: Two narrow bores of diameters 3.0 mm and 6.0 mm are joined together to form a U-tube open at both ends. If the U-tube contains water, what is the difference in its levels in the two limbs of the tube ? Surface tension of water at the temperature of the experiment is $7.3 \times 10^{-2} N m^{-1}$. Take the angle of contact to be zero and density of water to be $1.0 \times 10^3 kg m^{-3}$ ($g = 9.8 m s^{-2}$) .
- Q10.31(a): (a) It is known that density $\rho$ of air decreases with height $y$ as $\rho = \rho_0 e^{-y/y_0}$ where $\rho_0 = 1.25 kg m^{-3}$ is the density at sea level, and $y_0$ is a constant. This density variation is called the law of atmospheres. Obtain this law assuming that the temperature of atmosphere remains a constant (isothermal conditions). Also assume that the value of $g$ remains constant.
- Q10.31(b): (b) A large He balloon of volume $1425 m^3$ is used to lift a payload of 400 kg. Assume that the balloon maintains constant radius as it rises. How high does it rise ? [Take $y_0 = 8000$ m and $\rho_{He} = 0.18 kg m^{-3}$].
CBSE Solutions for Class 11 Physics Mechanical Properties of Fluids
Chapters in CBSE - Class 11 Physics
Top Tutors who teach Mechanical Properties of Fluids
Top Tutor
Dilshad Garden, Delhi
4 yrs of
Exp
3 students
969 hrs of classes completed
260
per hour
Online Classes
I am a Chartered Accountant by profession and have been teaching Commerce subjects—primarily Accounting and Economics—for the past 4 years. I work with BCom/BSc students and CA aspirants, helping them build strong conceptual clarity and practical understanding. Teaching is my passion and hobby, and I focus on delivering quality education by maintaining small group sizes (2–3 students at a time). This allows me to give individual attention, ensuring that every student understands the concepts thoroughly and gains confidence. My teaching approach is practical-based, designed to bridge the gap between academic theories and real-world industry applications. I emphasize how concepts are applied in actual business environments—both in private and public sectors—so students can connect textbook knowledge to real scenarios. I prefer conducting online, individual sessions to provide personalized support and address each student’s learning style and pace. I teach using a whiteboard for clear and visual explanations. For CA students, I recommend specific books aligned with the syllabus. For Class 11 and 12, I rely on their existing school books but provide additional notes or references on request to avoid overloading them. While I haven't pursued awards in teaching, the positive feedback from my students and their academic success bring me immense satisfaction. My goal is to make learning effective, relevant, and engaging for every student I teach.
Top Tutor
Madhurawada, Visakhapatnam
20 yrs of
Exp
47 students
5175 hrs of classes completed
400
per hour
Online Classes
Student's Home
Tutor's home
I mentored several students for CBSE/ICSE/STATE/NIOS 11 th class in physics for the last 24 years.
I recently started taking online physics classes with him, and my experience has been really positive. He is a knowledgeable and dedicated teacher who explains even difficult concepts in a simple and understandable manner. What I appreciate most is his patience and willingness to clear every doubt, ensuring that I have a proper understanding of the topic before moving forward. His teaching approach makes physics much easier to follow and helps build confidence in the subject. He is also very approachable and creates a comfortable learning environment where asking questions never feels difficult. I would definitely recommend him to students looking for a supportive and effective physics tutor.
Top Tutor
Zafarpur Mahawan, Karari
10 yrs of
Exp
1 student
287 hrs of classes completed
350
per hour
Online Classes
In my school, commerce is introduced in class 11th itself. So it became very significant that students are given all the basic information about their subjects and also to develop keen interest in them by relating the topics to their everyday life. With loads of practice and exemplary notes, the requisite foundation is made. And I make sure the topics are nicely delivered.
We took online mode from outside india, All classes held on time with excellent explanation and clear communication. Positive recommendations from my side.
Top Tutor
Sarv Suvidha Nagar, Indore
1 yrs of
Exp
3 students
200 hrs of classes completed
200
per hour
Online Classes
"I am an AI-enabled Social Science educator with experience teaching at Physics Wallah. I specialize in making complex concepts simple through storytelling and visual learning. I am passionate about creating engaging and effective learning experiences for students. I would love to contribute my skills as a tutor on your platform."
Teaches with great efforts, always ready to explain concepts acc to the needs and requirements of student and also comes up with different teaching styles for giving concept clarity...
Top Tutor
Sector 117, Noida
20 yrs of
Exp
23 hrs of classes completed
Online Classes
I am result oriented professional teacher, i have long experience in commerce. i show my performance through results, if you ready to pay, i can give results. i confirm the best result for good number of students from reputed schools of Noida. i teach few students only ever year. either you call immediately or you can count me to call in future, if you will not get result.
Other Subjects in CBSE - Class 11
Download free CBSE - Class 11 Physics Mechanical Properties of Fluids Additional Exercises worksheets
Download Now
