Find the best tutors and institutes for Class 11 Tuition
Mechanical Properties of Fluids Additional Exercises Solutions
- Q10.21: A tank with a square base of area $1.0 m^2$ is divided by a vertical partition in the middle. The bottom of the partition has a small-hinged door of area $20 cm^2$. The tank is filled with water in one compartment, and an acid (of relative density 1.7) in the other, both to a height of 4.0 m. compute the force necessary to keep the door close.
- Q10.22(a): A manometer reads the pressure of a gas in an enclosure as shown in Fig. 10.25 (a) When a pump removes some of the gas, the manometer reads as in Fig. 10.25 (b) The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (a) Give the absolute and gauge pressure of the gas in the enclosure for cases (a) and (b), in units of cm of mercury.
- Q10.22(b): A manometer reads the pressure of a gas in an enclosure as shown in Fig. 10.25 (a) When a pump removes some of the gas, the manometer reads as in Fig. 10.25 (b) The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (b) How would the levels change in case (b) if 13.6 cm of water (immiscible with mercury) are poured into the right limb of the manometer ? (Ignore the small change in the volume of the gas).
- Q10.23: Two vessels have the same base area but different shapes. The first vessel takes twice the volume of water that the second vessel requires to fill upto a particular common height. Is the force exerted by the water on the base of the vessel the same in the two cases ? If so, why do the vessels filled with water to that same height give different readings on a weighing scale ?
- Q10.24: During blood transfusion the needle is inserted in a vein where the gauge pressure is 2000 Pa. At what height must the blood container be placed so that blood may just enter the vein ? [Use the density of whole blood from Table 10.1].
- Q10.25(a): In deriving Bernoulli’s equation, we equated the work done on the fluid in the tube to its change in the potential and kinetic energy. (a) What is the largest average velocity of blood flow in an artery of diameter $2 \times 10^{-3} m$ if the flow must remain laminar ?
- Q10.25(b): In deriving Bernoulli’s equation, we equated the work done on the fluid in the tube to its change in the potential and kinetic energy. (b) Do the dissipative forces become more important as the fluid velocity increases ? Discuss qualitatively.
- Q10.26(a): (a) What is the largest average velocity of blood flow in an artery of radius $2 \times 10^{-3}m$ if the flow must remain lanimar?
- Q10.26(b): (b) What is the corresponding flow rate ? (Take viscosity of blood to be $2.084 \times 10^{-3} Pa s$).
- Q10.27: A plane is in level flight at constant speed and each of its two wings has an area of $25 m^2$. If the speed of the air is 180 km/h over the lower wing and 234 km/h over the upper wing surface, determine the plane’s mass. (Take air density to be $1 kg m^{-3}$).
- Q10.28: In Millikan’s oil drop experiment, what is the terminal speed of an uncharged drop of radius $2.0 \times 10^{-5} m$ and density $1.2 \times 10^3 kg m^{-3}$. Take the viscosity of air at the temperature of the experiment to be $1.8 \times 10^{-5} Pa s$. How much is the viscous force on the drop at that speed ? Neglect buoyancy of the drop due to air.
- Q10.29: Mercury has an angle of contact equal to $140^{\circ}$ with soda lime glass. A narrow tube of radius 1.00 mm made of this glass is dipped in a trough containing mercury. By what amount does the mercury dip down in the tube relative to the liquid surface outside ? Surface tension of mercury at the temperature of the experiment is $0.465 N m^{-1}$. Density of mercury = $13.6 \times 10^3 kg m^{-3}$.
- Q10.30: Two narrow bores of diameters 3.0 mm and 6.0 mm are joined together to form a U-tube open at both ends. If the U-tube contains water, what is the difference in its levels in the two limbs of the tube ? Surface tension of water at the temperature of the experiment is $7.3 \times 10^{-2} N m^{-1}$. Take the angle of contact to be zero and density of water to be $1.0 \times 10^3 kg m^{-3}$ ($g = 9.8 m s^{-2}$) .
- Q10.31(a): (a) It is known that density $\rho$ of air decreases with height $y$ as $\rho = \rho_0 e^{-y/y_0}$ where $\rho_0 = 1.25 kg m^{-3}$ is the density at sea level, and $y_0$ is a constant. This density variation is called the law of atmospheres. Obtain this law assuming that the temperature of atmosphere remains a constant (isothermal conditions). Also assume that the value of $g$ remains constant.
- Q10.31(b): (b) A large He balloon of volume $1425 m^3$ is used to lift a payload of 400 kg. Assume that the balloon maintains constant radius as it rises. How high does it rise ? [Take $y_0 = 8000$ m and $\rho_{He} = 0.18 kg m^{-3}$].
Other Exercises for CBSE - Class 11 Physics Mechanical Properties of Fluids
Chapters in CBSE - Class 11 Physics
Top Tutors who teach Mechanical Properties of Fluids
I am an experienced tutor with 4 years of experience in this field. I completed my BE in the year 2014. I have tutored students for Spoken English, BTech Tuition, C Language, C++ Language, CAD, CE and COMEDK Coaching. I can conduct classes at Student's Home, My place and Online via a different medium to students from International, CBSE, State, ICSE/ISC Board. I follow different techniques while teaching so, that my students are engaged positively. To make learning fun and easier, I use creative and innovative ideas.
Wonderful tutor with a great personality. Street smart way of tutoring. He covered PCM syllabus for std 12 in 4 months right from the basics. Now I am confident about giving my boards.
With 26 years of extensive experience in teaching mathematics, I specialize in instructing students from grades 9 through 12 across various boards, including CBSE, ICSE, and State Boards. My academic qualifications include a BSc, BTech in Mathematics, MSc, BEd, and I am currently pursuing a PhD. This strong educational background, coupled with my long-standing commitment to teaching, has allowed me to develop a comprehensive approach to mathematics education. I have held prestigious positions as a College Associate Professor at esteemed institutions such as Ganga Institute of Technology and Management, VAISH College, and BLS University. My dedication to teaching has been recognized with the Best Teacher Award from both VAISH College and Ganga Institute of Technology and Management. These accolades reflect my commitment to delivering high-quality education and fostering academic excellence in my students. Currently, I run my own offline center where I conduct mathematics classes for students in grades 9 through 12. In addition to my offline classes, I also offer online sessions to provide flexible learning options. My teaching methods involve practical sessions using a whiteboard to facilitate a clear and engaging learning experience. I emphasize the importance of regular assessments, providing my students with notes, assignments, and weekly tests to track their progress and ensure thorough understanding. My approach to teaching mathematics is rooted in practical application and interactive learning. By focusing on real-world problems and fostering a supportive learning environment, I aim to help students build a strong foundation in mathematics, achieve academic success, and develop a lifelong appreciation for the subject.
Very patient teacher who makes maths easy and manageable. Fear factor of this subject is completely removed by her . Very competent indeed .
I have done b.Tech in electrical engineering from IIT KANPUR. I taught one year in akash institute patna, 2 years in fiitjee patna. Currently I am teaching in unacademy. I have taught more than 6000 jee and neet aspirants. In which more than 500 students are selected in iitand aiims. If some one is interested to improve their physics upto jee advanced level take help with me .And see the magic. I can help students in their all type of assignment from any institute like allen, fiitjee, narayna, akash, resonance. I can help students to solve both volume of h.C verma within two month if some one is intrested in solving I.E.Irodov join me and see the next level of physics My way of teaching is so easy and so advanced that student will realyy enjoy it. Don't waste your time in making decision just join and experience my level
My Physics teacher explains concepts very clearly and makes even difficult topics easier to understand. The classes are engaging, and the examples used help connect the concepts to real-life situations. I also appreciate the way doubts are addressed patiently and without making students feel uncomfortable about asking questions. The teacher encourages us to think logically rather than just memories formulas, which has helped me develop a better understanding of Physics. Overall, the teaching is effective, supportive, and motivating.
I was a student in one of the top colleges of Ludhiana. I have proficiency in English . I can teach all subjects to primary wing .
With years of experience teaching Class 11 Mathematics, I have honed my skills to provide students with a deep understanding of complex concepts. My teaching approach is student-centered, focusing on clarity, problem-solving techniques, and real-world applications. I have a strong command over the subject, making intricate topics accessible and engaging. My classes are interactive and designed to foster a genuine interest in mathematics. By incorporating innovative methods and advanced tools, I ensure that learning is both effective and enjoyable. Join my classes to experience a supportive learning environment where your academic success is the ultimate goal!
very interactive session, sir makes things easier and his teaching style is doubt vanishing Thank you sir for such a nice session
Other Subjects in CBSE - Class 11
Download free CBSE - Class 11 Physics Mechanical Properties of Fluids Additional Exercises worksheets
Download Now