UrbanPro
true

Find the best tutors and institutes for Class 12 Tuition

Find Best Class 12 Tuition

Please select a Category.

Please select a Locality.

No matching category found.

No matching Locality found.

Outside India?

Learn NCERT Exercise 1 with Free Lessons & Tips

Define the term 'amorphous'. Give a few examples of amorphous solids.

Amorphous solids are the solids whose constituent particles are of irregular shapes and have short range order. These solids are isotropic in nature and melt over a range of temperature. Therefore, amorphous solids are sometimes called pseudo solids or super cooled liquids. They do not have definite heat of fusion. When cut with a sharp-edged tool, they cut into two pieces with irregular surfaces. Examples of amorphous solids include glass, rubber, and plastic.

Comments

What makes a glass different from a solid such as quartz? Under what conditions could quartz be converted into glass?

The arrangement of the constituent particles makes glass different from quartz. In glass, the constituent particles have short range order, but in quartz, the constituent particles have both long range and short range orders.

Quartz can be converted into glass by heating and then cooling it rapidly.

Comments

Classify each of the following solids as ionic, metallic, molecular, network (covalent) or amorphous.

(i) Tetra phosphorus decoxide (P4O10) (vii) Graphite

(ii) Ammonium phosphate (NH4)3PO4(viii) Brass

(iii) SiC (ix) Rb

(iv) I2(x) LiBr

(v) P4(xi) Si

Ionic → (ii) Ammonium phosphate (NH4)3PO4, (x) LiBr

Metallic → (viii) Brass, (ix) Rb

Molecular → (i) Tetra phosphorus decoxide (P4O10), (iv) I2, (v) P4.

Covalent (network) → (iii) SiC, (vii) Graphite, (xi) Si

Amorphous → (vi) Plastic

Comments

(i) What is meant by the term 'coordination number'?(ii) What is the coordination number of atoms:(a) in a cubic close-packed structure?(b) in a body-centred cubic structure?

(i) The number of nearest neighbours of any constituent particle present in the crystal lattice is called its coordination number.

(ii) The coordination number of atoms

(a) in a cubic close-packed structure is 12, and

(b) in a body-centred cubic structure is 8

Comments

How can you determine the atomic mass of an unknown metal if you know its density and the dimension of its unit cell? Explain.

By knowing the density of an unknown metal and the dimension of its unit cell, the atomic mass of the metal can be determined.

Let ‘a’ be the edge length of a unit cell of a crystal, ‘d’ be the density of the metal, ‘m’ be the mass of one atom of the metal and ‘z’ be the number of atoms in the unit cell.

Now, density of the unit cell

[Since mass of the unit cell = Number of atoms in the unit cell × mass of one atom]

[Volume of the unit cell = (Edge length of the cubic unit cell)3]

From equation (i), we have:

Now, mass of one atom of metal (m)

Therefore,

If the edge lengths are different (say a, b and c), then equation (ii) becomes:

M = d(abc)NAz     (iv)M = d(abc)NAz     (iv)

From equations (iii) and (iv), we can determine the atomic mass of the unknown metal.

Comments

'Stability of a crystal is reflected in the magnitude of its melting point'. Comment. Collect melting points of solid water, ethyl alcohol, diethyl ether and methane from a data book. What can you say about the intermolecular forces between these molecules?

Higher the melting point, greater is the intermolecular force of attraction and greater is the stability. A substance with higher melting point is more stable than a substance with lower melting point.

The melting points of the given substances are:

Solid water → 273 K

Ethyl alcohol → 158.8 K

Diethyl ether → 156.85 K

Methane → 89.34 K

Now, on observing the values of the melting points, it can be said that among the given substances, the intermolecular force in solid water is the strongest and that in methane is the weakest.

Comments

How will you distinguish between the following pairs of terms:(i) Hexagonal close-packing and cubic close-packing?(ii) Crystal lattice and unit cell?(iii) Tetrahedral void and octahedral void?

  1. A 2-D hexagonal close-packing contains two types of triangular voids (a and b) as shown in figure 1. Let us call this 2-D structure as layer A. Now, particles are kept in the voids present in layer A (it can be easily observed from figures 2 and 3 that only one of the voids will be occupied in the process, i.e., either a or b). Let us call the particles or spheres present in the voids of layer A as layer B. Now, two types of voids are present in layer B (c and d). Unlike the voids present in layer A, the two types of voids present in layer B are not similar. Void c is surrounded by 4 spheres and is called the tetrahedral void. Void d is surrounded by 6 spheres and is called the octahedral void.

Figure 1

Figure 2

Figure 3

Now, the next layer can be placed over layer B in 2 ways.

Case 1: When the third layer (layer C) is placed over the second one (layer B) in such a manner that the spheres of layer C occupy the tetrahedral voids c.

In this case we get hexagonal close-packing. This is shown in figure 4. In figure 4.1, layer B is present over the voids a and layer C is present over the voids c. In figure 4.2, layer B is present over the voids b and layer C is present over the voids c. It can be observed from the figure that in this arrangement, the spheres present in layer C are present directly above the spheres of layer A. Hence, we can say that the layers in hexagonal close-packing are arranged in an ABAB….. pattern.

Figure 4.1

Figure 4.2

Case 2: When the third layer (layer C) is placed over layer B in such a manner that the spheres of layer C occupy the octahedral voids d.

In this case we get cubic close-packing. In figure 5.1, layer B is present over the voids a and layer C is present over the voids d. In figure 5.2, layer B is present over the voids b and layer C is present over the voids d. It can be observed from the figure that the arrangement of particles in layer C is completely different from that in layers A or B. When the fourth layer is kept over the third layer, the arrangement of particles in this layer is similar to that in layer A. Hence, we can say that the layers in cubic close-packing are arranged in an ABCABC….. pattern.

Figure 5.1

Figure 5.2

The side views of hcp and ccp are given in figures 6.1 and 6.2 respectively.

Figure 6.1

Figure 6.2

(ii) The diagrammatic representation of the constituent particles (atoms, ions, or molecules) present in a crystal in a regular three-dimensional arrangement is called crystal lattice.

A unit cell is the smallest three-dimensional portion of a crystal lattice. When repeated again and again in different directions, it generates the entire crystal lattice.

(iii) A void surrounded by 4 spheres is called a tetrahedral void and a void surrounded by 6 spheres is called an octahedral void. Figure 1 represents a tetrahedral void and figure 2 represents an octahedral void.

Figure 1

Figure 2

Comments

How many lattice points are there in one unit cell of each of the following lattice?(i) Face-centred cubic(ii) Face-centred tetragonal(iii) Body-centred

(i) There are 14 (8 from the corners + 6 from the faces) lattice points in face-centred cubic.

(ii) There are 14 (8 from the corners + 6 from the faces) lattice points in face-centred tetragonal.

(iii) There are 9 (1 from the centre + 8 from the corners) lattice points in body-centred cubic.

Comments

Explain(i) The basis of similarities and differences between metallic and ionic crystals.(ii) Ionic solids are hard and brittle.

(i) The basis of similarities between metallic and ionic crystals is that both these crystal types are held by the electrostatic force of attraction. In metallic crystals, the electrostatic force acts between the positive ions and the electrons. In ionic crystals, it acts between the oppositely-charged ions. Hence, both have high melting points.

The basis of differences between metallic and ionic crystals is that in metallic crystals, the electrons are free to move and so, metallic crystals can conduct electricity. However, in ionic crystals, the ions are not free to move. As a result, they cannot conduct electricity. However, in molten state or in aqueous solution, they do conduct electricity.

(ii) The constituent particles of ionic crystals are ions. These ions are held together in three-dimensional arrangements by the electrostatic force of attraction. Since the electrostatic force of attraction is very strong, the charged ions are held in fixed positions. This is the reason why ionic crystals are hard and brittle.

Comments

Calculate the efficiency of packing in case of a metal crystal for(i) simple cubic(ii) body-centred cubic(iii) face-centred cubic (with the assumptions that atoms are touching each other).

(i) Simple cubic

In a simple cubic lattice, the particles are located only at the corners of the cube and touch each other along the edge.

Let the edge length of the cube be ‘a’ and the radius of each particle be r.

So, we can write:

a = 2r

Now, volume of the cubic unit cell = a3

= (2r)3

= 8r3

We know that the number of particles per unit cell is 1.

Therefore, volume of the occupied unit cell

Hence, packing efficiency

(ii) Body-centred cubic

It can be observed from the above figure that the atom at the centre is in contact with the other two atoms diagonally arranged.

From ΔFED, we have:

Again, from ΔAFD, we have:

Let the radius of the atom be r.

Length of the body diagonal, c = 4π

or,

Volume of the cube,

A body-centred cubic lattice contains 2 atoms.

So, volume of the occupied cubic lattice

(iii) Face-centred cubic

Let the edge length of the unit cell be ‘a’ and the length of the face diagonal AC be b.

From ΔABC, we have:

Let r be the radius of the atom.

Now, from the figure, it can be observed that:

Now, volume of the cube,

We know that the number of atoms per unit cell is 4.

So, volume of the occupied unit cell

= 74%

Comments

Silver crystallises in fcc lattice. If edge length of the cell is 4.07 × 10−8 cm and density is 10.5 g cm−3, calculate the atomic mass of silver.

It is given that the edge length, a = 4.077 × 10−8 cm

Density, d = 10.5 g cm−3

As the lattice is fcc type, the number of atoms per unit cell, z = 4

We also know that, NA = 6.022 × 1023 mol−1

Using the relation:

= 107.13 gmol−1

Therefore, atomic mass of silver = 107.13 u

Comments

A cubic solid is made of two elements P and Q. Atoms of Q are at the corners of the cube and P at the body-centre. What is the formula of the compound? What are the coordination numbers of P and Q?

It is given that the atoms of Q are present at the corners of the cube.

Therefore, number of atoms of Q in one unit cell

It is also given that the atoms of P are present at the body-centre.

Therefore, number of atoms of P in one unit cell = 1

This means that the ratio of the number of P atoms to the number of Q atoms, P:Q = 1:1

Hence, the formula of the compound is PQ.

The coordination number of both P and Q is 8.

Comments

Niobium crystallises in body-centred cubic structure. If density is 8.55 g cm−3, calculate atomic radius of niobium using its atomic mass 93 u.

It is given that the density of niobium, d = 8.55 g cm−3

Atomic mass, M = 93 gmol−1

As the lattice is bcc type, the number of atoms per unit cell, z = 2

We also know that, NA = 6.022 × 1023 mol−1

Applying the relation:

= 3.612 × 10−23 cm3

So, a = 3.306 × 10−8 cm

For body-centred cubic unit cell:

= 1.432 × 10−8 cm

= 14.32 × 10−9 cm

= 14.32 nm

Comments

If the radius of the octachedral void is r and radius of the atoms in close packing is R, derive relation between r and R.

A sphere with centre O, is fitted into the octahedral void as shown in the above figure. It can be observed from the figure that ΔPOQ is right-angled

∠POQ = 900

Now, applying Pythagoras theorem, we can write:

Comments

Copper crystallises into a fcc lattice with edge length 3.61 × 10−8 cm. Show that the calculated density is in agreement with its measured value of 8.92 g cm−3.

Edge length, a = 3.61 × 10−8 cm

As the lattice is fcc type, the number of atoms per unit cell, z = 4

Atomic mass, M = 63.5 g mol−1

We also know that, NA = 6.022 × 1023 mol−1

Applying the relation:

= 8.97 g cm−3

The measured value of density is given as 8.92 g cm−3. Hence, the calculated density 8.97 g cm−3 is in agreement with its measured value.

Comments

Analysis shows that nickel oxide has the formula Ni0.98O1.00. What fractions of nickel exist as Ni2+ and Ni3+ ions?

The formula of nickel oxide is Ni0.98O1.00.

Therefore, the ratio of the number of Ni atoms to the number of O atoms,
Ni : O = 0.98 : 1.00 = 98 : 100

Now, total charge on 100 O2− ions = 100 × (−2)

= −200

Let the number of Ni2+ ions be x.

So, the number of Ni3+ ions is 98 − x.

Now, total charge on Ni2+ ions = x(+2)

= +2x

And, total charge on Ni3+ ions = (98 − x)(+3)

= 294 − 3x

Since, the compound is neutral, we can write:

2x + (294 − 3x) + (−200) = 0

⇒ −x + 94 = 0

x = 94

Therefore, number of Ni2+ ions = 94

And, number of Ni3+ ions = 98 − 94 = 4

Hence, fraction of nickel that exists as Ni2+

= 0.959

And, fraction of nickel that exists as

= 0.041

Alternatively, fraction of nickel that exists as Ni3+ = 1 − 0.959

= 0.041

Comments

What is a semiconductor? Describe the two main types of semiconductors and contrast their conduction mechanism.

Semiconductors are substances having conductance in the intermediate range of 10-6 to 104 ohm−1m−1.

The two main types of semiconductors are:

(i) n-type semiconductor

(ii) p-type semiconductor

n-type semiconductor: The semiconductor whose increased conductivity is a result of negatively-charged electrons is called an n-type semiconductor. When the crystal of a group 14 element such as Si or Ge is doped with a group 15 element such as P or As, an n-type semiconductor is generated.

Si and Ge have four valence electrons each. In their crystals, each atom forms four covalent bonds. On the other hand, P and As contain five valence electrons each. When Si or Ge is doped with P or As, the latter occupies some of the lattice sites in the crystal. Four out of five electrons are used in the formation of four covalent bonds with four neighbouring Si or Ge atoms. The remaining fifth electron becomes delocalised and increases the conductivity of the doped Si or Ge.

p-type semiconductor: The semiconductor whose increased in conductivity is a result of electron hole is called a p-type semiconductor. When a crystal of group 14 elements such as Si or Ge is doped with a group 13 element such as B, Al, or Ga (which contains only three valence electrons), a p-type of semiconductor is generated.

When a crystal of Si is doped with B, the three electrons of B are used in the formation of three covalent bonds and an electron hole is created. An electron from the neighbouring atom can come and fill this electron hole, but in doing so, it would leave an electron hole at its original position. The process appears as if the electron hole has moved in the direction opposite to that of the electron that filled it. Therefore, when an electric field is applied, electrons will move toward the positively-charged plate through electron holes. However, it will appear as if the electron holes are positively-charged and are moving toward the negatively- charged plate.

Comments

Non-stoichiometric cuprous oxide, Cu2O can be prepared in laboratory. In this oxide, copper to oxygen ratio is slightly less than 2:1. Can you account for the fact that this substance is a p-type semiconductor?

In the cuprous oxide (Cu2O) prepared in the laboratory, copper to oxygen ratio is slightly less than 2:1. This means that the number of Cu+ ions is slightly less than twice the number of O2− ions. This is because some Cu+ ions have been replaced by Cu2+ ions. Every Cu2+ ion replaces two Cu+ ions, thereby creating holes. As a result, the substance conducts electricity with the help of these positive holes. Hence, the substance is a p-type semiconductor.

Comments

Ferric oxide crystallises in a hexagonal close-packed array of oxide ions with two out of every three octahedral holes occupied by ferric ions. Derive the formula of the ferric oxide.

Let the number of oxide (O2−) ions be x.

So, number of octahedral voids = x

It is given that two out of every three octahedral holes are occupied by ferric ions.

So, number of ferric (Fe3+) ions

Therefore, ratio of the number of Fe3+ ions to the number of O2− ions,
Fe3+ : O2−

= 2 : 3

Hence, the formula of the ferric oxide is Fe2O3.

Comments

Classify each of the following as being either a p-type or an n-type semiconductor:

(i) Ge doped with In (ii) B doped with Si.

(i) Ge (a group 14 element) is doped with In (a group 13 element). Therefore, a hole will be created and the semiconductor generated will be a p-type semiconductor.

(ii) B (a group 13 element) is doped with Si (a group 14 element). Thus, a hole will be created and the semiconductor generated will be a p-type semiconductor.

Comments

Gold (atomic radius = 0.144 nm) crystallises in a face-centred unit cell. What is the length of a side of the cell?

For a face-centred unit cell:

It is given that the atomic radius, r = 0.144 nm

So,

= 0.407 nm

Hence, length of a side of the cell = 0.407 nm

Comments

In terms of band theory, what is the difference(i) Between a conductor and an insulator(ii) Between a conductor and a semiconductor

(i) The valence band of a conductor is partially-filled or it overlaps with a higher energy, unoccupied conduction band.

On the other hand, in the case of an insulator, the valence band is fully- filled and there is a large gap between the valence band and the conduction band.

(ii) In the case of a conductor, the valence band is partially-filled or it overlaps with a higher energy, unoccupied conduction band. So, the electrons can flow easily under an applied electric field.

On the other hand, the valence band of a semiconductor is filled and there is a small gap between the valence band and the next higher conduction band. Therefore, some electrons can jump from the valence band to the conduction band and conduct electricity.

Comments

Explain the following terms with suitable examples:

(i) Schottky defect

(ii) Frenkel defect

(iii) Interstitials and

(iv) F-centres

(i) Schottky defect: Schottky defect is basically a vacancy defect shown by ionic solids. In this defect, an equal number of cations and anions are missing to maintain electrical neutrality. It decreases the density of a substance. Significant number of Schottky defects is present in ionic solids. For example, in NaCl, there are approximately 106 Schottky pairs per cm3 at room temperature. Ionic substances containing similar-sized cations and anions show this type of defect. For example: NaCl, KCl, CsCl, AgBr, etc.

(ii) Frenkel defect: Ionic solids containing large differences in the sizes of ions show this type of defect. When the smaller ion (usually cation) is dislocated from its normal site to an interstitial site, Frenkel defect is created. It creates a vacancy defect as well as an interstitial defect. Frenkel defect is also known as dislocation defect. Ionic solids such as AgCl, AgBr, AgI, and ZnS show this type of defect.

(iii) Interstitials: Interstitial defect is shown by non-ionic solids. This type of defect is created when some constituent particles (atoms or molecules) occupy an interstitial site of the crystal. The density of a substance increases because of this defect.

(iv) F-centres: When the anionic sites of a crystal are occupied by unpaired electrons, the ionic sites are called F-centres. These unpaired electrons impart colour to the crystals. For example, when crystals of NaCl are heated in an atmosphere of sodium vapour, the sodium atoms are deposited on the surface of the crystal. The Cl ions diffuse from the crystal to its surface and combine with Na atoms, forming NaCl. During this process, the Na atoms on the surface of the crystal lose electrons. These released electrons diffuse into the crystal and occupy the vacant anionic sites, creating F-centres.

Comments

Aluminium crystallises in a cubic close-packed structure. Its metallic radius is 125 pm.

(i) What is the length of the side of the unit cell?

(ii) How many unit cells are there in 1.00 cm3 of aluminium?

(i) For cubic close-packed structure:

= 353.55 pm

= 354 pm (approximately)

(ii) Volume of one unit cell = (354 pm)3

= 4.4 × 107 pm3

= 4.4 × 107 × 10−30 cm3

= 4.4 × 10−23 cm3

Therefore, number of unit cells in 1.00 cm3 =

= 2.27 × 1022

Comments

If NaCl is doped with 10−3 mol % of SrCl2, what is the concentration of cation vacancies?

It is given that NaCl is doped with 10−3 mol% of SrCl2.

This means that 100 mol of NaCl is doped with 10−3 mol of SrCl2.

Therefore, 1 mol of NaCl is doped withmol of SrCl2

= 10−5 mol of SrCl2

Cation vacancies produced by one Sr2+ ion = 1

Hence, the concentration of cation vacancies created by SrCl2 is 6.022 × 108 per mol of NaCl.

Comments

Explain the following with suitable examples:

(i) Ferromagnetism

(ii)Paramagnetism

(iii)Ferrimagnetism

(iv)Antiferromagnetism

(v)12-16 and 13-15 group compounds.

 

(i) Ferromagnetism: The substances that are strongly attracted by a magnetic field are called ferromagnetic substances. Ferromagnetic substances can be permanently magnetised even in the absence of a magnetic field. Some examples of ferromagnetic substances are iron, cobalt, nickel, gadolinium, and CrO­2.

In solid state, the metal ions of ferromagnetic substances are grouped together into small regions called domains and each domain acts as a tiny magnet. In an un-magnetised piece of a ferromagnetic substance, the domains are randomly-oriented and so, their magnetic moments get cancelled. However, when the substance is placed in a magnetic field, all the domains get oriented in the direction of the magnetic field. As a result, a strong magnetic effect is produced. This ordering of domains persists even after the removal of the magnetic field. Thus, the ferromagnetic substance becomes a permanent magnet.

Schematic alignment of magnetic moments in ferromagnetic substances

(ii) Paramagnetism: The substances that are attracted by a magnetic field are called paramagnetic substances. Some examples of paramagnetic substances are O2, Cu2t, Fe3t, and Cr3t.

Paramagnetic substances get magnetised in a magnetic field in the same direction, but lose magnetism when the magnetic field is removed. To undergo paramagnetism, a substance must have one or more unpaired electrons. This is because the unpaired electrons are attracted by a magnetic field, thereby causing paramagnetism.

(iii) Ferrimagnetism: The substances in which the magnetic moments of the domains are aligned in parallel and anti-parallel directions, in unequal numbers, are said to have ferrimagnetism. Examples include Fe3O4 (magnetite), ferrites such as MgFe2O4 and ZnFe2O4.

Ferrimagnetic substances are weakly attracted by a magnetic field as compared to ferromagnetic substances. On heating, these substances become paramagnetic.

Schematic alignment of magnetic moments in ferrimagnetic substances

(iv) Antiferromagnetism: Antiferromagnetic substanceshave domain structures similar to ferromagnetic substances, but are oppositely-oriented. The oppositely-oriented domains cancel out each other’s magnetic moments.

Schematic alignment of magnetic moments in antiferromagnetic substances

(v) 12-16 and 13-15 group compounds: The 12-16 group compounds are prepared by combining group 12 and group 16 elements and the 13-15 group compounds are prepared by combining group 13 and group15 elements. These compounds are prepared to stimulate average valence of four as in Ge or Si. Indium (III) antimonide (IrSb), aluminium phosphide (AlP), and gallium arsenide (GaAS) are typical compounds of groups 13-15. GaAs semiconductors have a very fast response time and have revolutionised the designing of semiconductor devices. Examples of group 12-16 compounds include zinc sulphide (ZnS), cadmium sulphide (CdS), cadmium selenide (CdSe), and mercury (II) telluride (HgTe). The bonds in these compounds are not perfectly covalent. The ionic character of the bonds depends on the electronegativities of the two elements.

Comments

How helpful was it?

How can we Improve it?

Please tell us how it changed your life *

Please enter your feedback

Please enter your question below and we will send it to our tutor communities to answer it *

Please enter your question

Please select your tags

Please select a tag

Name *

Enter a valid name.

Email *

Enter a valid email.

Email or Mobile Number: *

Please enter your email or mobile number

Sorry, this phone number is not verified, Please login with your email Id.

Password: *

Please enter your password

By Signing Up, you agree to our Terms of Use & Privacy Policy

Thanks for your feedback

About UrbanPro

UrbanPro.com helps you to connect with the best Class 12 Tuition in India. Post Your Requirement today and get connected.

X

Looking for Class 12 Tuition Classes?

Find best tutors for Class 12 Tuition Classes by posting a requirement.

  • Post a learning requirement
  • Get customized responses
  • Compare and select the best

Looking for Class 12 Tuition Classes?

Get started now, by booking a Free Demo Class

This website uses cookies

We use cookies to improve user experience. Choose what cookies you allow us to use. You can read more about our Cookie Policy in our Privacy Policy

Accept All
Decline All

UrbanPro.com is India's largest network of most trusted tutors and institutes. Over 55 lakh students rely on UrbanPro.com, to fulfill their learning requirements across 1,000+ categories. Using UrbanPro.com, parents, and students can compare multiple Tutors and Institutes and choose the one that best suits their requirements. More than 7.5 lakh verified Tutors and Institutes are helping millions of students every day and growing their tutoring business on UrbanPro.com. Whether you are looking for a tutor to learn mathematics, a German language trainer to brush up your German language skills or an institute to upgrade your IT skills, we have got the best selection of Tutors and Training Institutes for you. Read more