Find the best tutors and institutes for Class 11 Tuition
Work EXERCISES Solutions
- Q5.1(a): The sign of work done by a force on a body is important to understand. State carefully if the following quantity is positive or negative: work done by a man in lifting a bucket out of a well by means of a rope tied to the bucket.
- Q5.1(b): The sign of work done by a force on a body is important to understand. State carefully if the following quantity is positive or negative: work done by gravitational force in the above case,
- Q5.1(c): The sign of work done by a force on a body is important to understand. State carefully if the following quantity is positive or negative: work done by friction on a body sliding down an inclined plane,
- Q5.1(d): The sign of work done by a force on a body is important to understand. State carefully if the following quantity is positive or negative: work done by an applied force on a body moving on a rough horizontal plane with uniform velocity,
- Q5.1(e): The sign of work done by a force on a body is important to understand. State carefully if the following quantity is positive or negative: work done by the resistive force of air on a vibrating pendulum in bringing it to rest.
- Q5.10: A body is moving unidirectionally under the influence of a source of constant power. Its displacement in time (t) is proportional to
- Q5.11: A body constrained to move along the z-axis of a coordinate system is subject to a constant force F given by (F = -\hat{i} + 2\hat{j} + 3\hat{k}) N where (\hat{i}, \hat{j}, \hat{k}) are unit vectors along the x-, y- and z-axis of the system respectively. What is the work done by this force in moving the body a distance of 4 m along the z-axis ?
- Q5.12: An electron and a proton are detected in a cosmic ray experiment, the first with kinetic energy 10 keV, and the second with 100 keV. Which is faster, the electron or the proton ? Obtain the ratio of their speeds. (electron mass = (9.11 \times 10^{-31}) kg, proton mass = (1.67 \times 10^{-27}) kg, 1 eV = (1.60 \times 10^{-19}) J).
- Q5.13: A rain drop of radius 2 mm falls from a height of 500 m above the ground. It falls with decreasing acceleration (due to viscous resistance of the air) until at half its original height, it attains its maximum (terminal) speed, and moves with uniform speed thereafter. What is the work done by the gravitational force on the drop in the first and second half of its journey ? What is the work done by the resistive force in the entire journey if its speed on reaching the ground is (10 m s^{-1}) ?
- Q5.14: A molecule in a gas container hits a horizontal wall with speed (200 m s^{-1}) and angle (30^{\circ}) with the normal, and rebounds with the same speed. Is momentum conserved in the collision ? Is the collision elastic or inelastic ?
- Q5.15: A pump on the ground floor of a building can pump up water to fill a tank of volume (30 m^{3}) in 15 min. If the tank is 40 m above the ground, and the efficiency of the pump is 30%, how much electric power is consumed by the pump ?
- Q5.16: Two identical ball bearings in contact with each other and resting on a frictionless table are hit head-on by another ball bearing of the same mass moving initially with a speed V. If the collision is elastic, which of the following is a possible result after collision ?
- Q5.17: The bob A of a pendulum released from (30^{\circ}) to the vertical hits another bob B of the same mass at rest on a table as shown. How high does the bob A rise after the collision ? Neglect the size of the bobs and assume the collision to be elastic.
- Q5.18: The bob of a pendulum is released from a horizontal position. If the length of the pendulum is 1.5 m, what is the speed with which the bob arrives at the lowermost point, given that it dissipated 5% of its initial energy against air resistance ?
- Q5.19: A trolley of mass 300 kg carrying a sandbag of 25 kg is moving uniformly with a speed of 27 km/h on a frictionless track. After a while, sand starts leaking out of a hole on the floor of the trolley at the rate of (0.05 kg s^{-1}). What is the speed of the trolley after the entire sand bag is empty ?
- Q5.2: A body of mass 2 kg initially at rest moves under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction = 0.1. Compute the (a) work done by the applied force in 10 s, (b) work done by friction in 10 s, (c) work done by the net force on the body in 10 s, (d) change in kinetic energy of the body in 10 s, and interpret your results.
- Q5.20: A body of mass 0.5 kg travels in a straight line with velocity (v = a x^{3/2}) where (a = 5 m^{-1/2} s^{-1}). What is the work done by the net force during its displacement from (x = 0) to (x = 2 m) ?
- Q5.21(a): The blades of a windmill sweep out a circle of area A. If the wind flows at a velocity (v) perpendicular to the circle, what is the mass of the air passing through it in time (t) ?
- Q5.21(b): The blades of a windmill sweep out a circle of area A. What is the kinetic energy of the air ?
- Q5.21(c): The blades of a windmill sweep out a circle of area A. Assume that the windmill converts 25% of the wind’s energy into electrical energy, and that (A = 30 m^{2}), (v = 36 km/h) and the density of air is (1.2 kg m^{-3}). What is the electrical power produced ?
- Q5.22(a): A person trying to lose weight (dieter) lifts a 10 kg mass, one thousand times, to a height of 0.5 m each time. Assume that the potential energy lost each time she lowers the mass is dissipated. How much work does she do against the gravitational force ?
- Q5.22(b): A person trying to lose weight (dieter) lifts a 10 kg mass, one thousand times, to a height of 0.5 m each time. Assume that the potential energy lost each time she lowers the mass is dissipated. Fat supplies (3.8 \times 10^{7}J) of energy per kilogram which is converted to mechanical energy with a 20% efficiency rate. How much fat will the dieter use up?
- Q5.23(a): A family uses 8 kW of power. Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
- Q5.23(b): A family uses 8 kW of power. Compare this area to that of the roof of a typical house.
- Q5.3: Given are examples of some potential energy functions in one dimension. The total energy of the particle is indicated by a cross on the ordinate axis. In each case, specify the regions, if any, in which the particle cannot be found for the given energy. Also, indicate the minimum total energy the particle must have in each case. Think of simple physical contexts for which these potential energy shapes are relevant.
- Q5.4: The potential energy function for a particle executing linear simple harmonic motion is given by (V(x) = \frac{kx^{2}}{2}), where (k) is the force constant of the oscillator. For (k = 0.5 N m^{-1}), the graph of (V(x)) versus (x) is shown. Show that a particle of total energy 1 J moving under this potential must ‘turn back’ when it reaches (x = \pm 2 m).
- Q5.5(a): Answer the following : The casing of a rocket in flight burns up due to friction. At whose expense is the heat energy required for burning obtained? The rocket or the atmosphere?
- Q5.5(b): Answer the following : Comets move around the sun in highly elliptical orbits. The gravitational force on the comet due to the sun is not normal to the comet’s velocity in general. Yet the work done by the gravitational force over every complete orbit of the comet is zero. Why ?
- Q5.5(c): Answer the following : An artificial satellite orbiting the earth in very thin atmosphere loses its energy gradually due to dissipation against atmospheric resistance, however small. Why then does its speed increase progressively as it comes closer and closer to the earth ?
- Q5.5(d): In one case, a man walks 2 m carrying a mass of 15 kg on his hands. In another case, he walks the same distance pulling a rope behind him. The rope goes over a pulley, and a mass of 15 kg hangs at its other end. In which case is the work done greater?
- Q5.6(a): Choose the correct alternative: When a conservative force does positive work on a body, the potential energy of the body increases/decreases/remains unaltered.
- Q5.6(b): Choose the correct alternative: Work done by a body against friction always results in a loss of its kinetic/potential energy.
- Q5.6(c): Choose the correct alternative: The rate of change of total momentum of a many-particle system is proportional to the external force/sum of the internal forces on the system.
- Q5.6(d): Choose the correct alternative: In an inelastic collision of two bodies, the quantities which do not change after the collision are the total kinetic energy/total linear momentum/total energy of the system of two bodies.
- Q5.7(a): State if the following statement is true or false. Give reasons for your answer. In an elastic collision of two bodies, the momentum and energy of each body is conserved.
- Q5.7(b): State if the following statement is true or false. Give reasons for your answer. Total energy of a system is always conserved, no matter what internal and external forces on the body are present.
- Q5.7(c): State if the following statement is true or false. Give reasons for your answer. Work done in the motion of a body over a closed loop is zero for every force in nature.
- Q5.7(d): State if the following statement is true or false. Give reasons for your answer. In an inelastic collision, the final kinetic energy is always less than the initial kinetic energy of the system.
- Q5.8(a): Answer carefully, with reasons : In an elastic collision of two billiard balls, is the total kinetic energy conserved during the short time of collision of the balls (i.e. when they are in contact) ?
- Q5.8(b): Answer carefully, with reasons : Is the total linear momentum conserved during the short time of an elastic collision of two balls ?
- Q5.8(c): Answer carefully, with reasons : For an inelastic collision, state whether the total kinetic energy is conserved during the short time of collision and whether the total linear momentum is conserved during the same period.
- Q5.8(d): Answer carefully, with reasons : If the potential energy of two billiard balls depends only on the separation distance between their centres, is the collision elastic or inelastic ? (Note, we are talking here of potential energy corresponding to the force during collision, not gravitational potential energy).
- Q5.9: A body is initially at rest. It undergoes one-dimensional motion with constant acceleration. The power delivered to it at time (t) is proportional to
- Q6.1(a): The sign of work done by a force on a body is important to understand. State carefully if the following quantities are positive or negative: (a) work done by a man in lifting a bucket out of a well by means of a rope tied to the bucket.
- Q6.1(b): The sign of work done by a force on a body is important to understand. State carefully if the following quantities are positive or negative: (b) work done by gravitational force in the above case,
- Q6.1(c): The sign of work done by a force on a body is important to understand. State carefully if the following quantities are positive or negative: (c) work done by friction on a body sliding down an inclined plane,
- Q6.1(d): The sign of work done by a force on a body is important to understand. State carefully if the following quantities are positive or negative: (d) work done by an applied force on a body moving on a rough horizontal plane with uniform velocity,
- Q6.1(e): The sign of work done by a force on a body is important to understand. State carefully if the following quantities are positive or negative: (e) work done by the resistive force of air on a vibrating pendulum in bringing it to rest.
- Q6.10: A body is moving unidirectionally under the influence of a source of constant power. Its displacement in time $t$ is proportional to
- Q6.11: A body constrained to move along the z-axis of a coordinate system is subject to a constant force $F$ given by $F = (-\hat{i} + 2\hat{j} + 3\hat{k}) N$ where $\hat{i}, \hat{j}, \hat{k}$ are unit vectors along the x-, y- and z-axis of the system respectively. What is the work done by this force in moving the body a distance of 4 m along the z-axis ?
- Q6.12: An electron and a proton are detected in a cosmic ray experiment, the first with kinetic energy 10 keV, and the second with 100 keV. Which is faster, the electron or the proton ? Obtain the ratio of their speeds. (electron mass = $9.11 \times 10^{-31}$ kg, proton mass = $1.67 \times 10^{-27}$ kg, 1 eV = $1.60 \times 10^{-19}$ J).
- Q6.13: A rain drop of radius 2 mm falls from a height of 500 m above the ground. It falls with decreasing acceleration (due to viscous resistance of the air) until at half its original height, it attains its maximum (terminal) speed, and moves with uniform speed thereafter. What is the work done by the gravitational force on the drop in the first and second half of its journey ? What is the work done by the resistive force in the entire journey if its speed on reaching the ground is $10 \text{ m s}^{-1}$ ?
- Q6.14: A molecule in a gas container hits a horizontal wall with speed $200 \text{ m s}^{-1}$ and angle $30^{\circ}$ with the normal, and rebounds with the same speed. Is momentum conserved in the collision ? Is the collision elastic or inelastic ?
- Q6.15: A pump on the ground floor of a building can pump up water to fill a tank of volume $30 \text{ m}^3$ in 15 min. If the tank is 40 m above the ground, and the efficiency of the pump is 30%, how much electric power is consumed by the pump ?
- Q6.16: Two identical ball bearings in contact with each other and resting on a frictionless table are hit head-on by another ball bearing of the same mass moving initially with a speed $V$. If the collision is elastic, which of the following (Fig. 6.14) is a possible result after collision ?
- Q6.17: The bob $A$ of a pendulum released from $30^{\circ}$ to the vertical hits another bob $B$ of the same mass at rest on a table as shown in Fig. 6.15. How high does the bob $A$ rise after the collision ? Neglect the size of the bobs and assume the collision to be elastic.
- Q6.18: The bob of a pendulum is released from a horizontal position. If the length of the pendulum is 1.5 m, what is the speed with which the bob arrives at the lowermost point, given that it dissipated 5% of its initial energy against air resistance ?
- Q6.19: A trolley of mass 300 kg carrying a sandbag of 25 kg is moving uniformly with a speed of 27 km/h on a frictionless track. After a while, sand starts leaking out of a hole on the floor of the trolley at the rate of $0.05 \text{ kg s}^{-1}$. What is the speed of the trolley after the entire sand bag is empty ?
- Q6.2(a): A body of mass 2 kg initially at rest moves under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction = 0.1. Compute the (a) work done by the applied force in 10 s,
- Q6.2(b): A body of mass 2 kg initially at rest moves under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction = 0.1. Compute the (b) work done by friction in 10 s,
- Q6.2(c): A body of mass 2 kg initially at rest moves under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction = 0.1. Compute the (c) work done by the net force on the body in 10 s,
- Q6.2(d): A body of mass 2 kg initially at rest moves under the action of an applied horizontal force of 7 N on a table with coefficient of kinetic friction = 0.1. Compute the (d) change in kinetic energy of the body in 10 s, and interpret your results.
- Q6.20: A body of mass 0.5 kg travels in a straight line with velocity $v = ax^{3/2}$ where $a = 5 \text{ m}^{-1/2} \text{ s}^{-1}$. What is the work done by the net force during its displacement from $x = 0$ to $x = 2$ m ?
- Q6.21(a): The blades of a windmill sweep out a circle of area $A$. (a) If the wind flows at a velocity $v$ perpendicular to the circle, what is the mass of the air passing through it in time $t$ ?
- Q6.21(b): The blades of a windmill sweep out a circle of area $A$. (b) What is the kinetic energy of the air ?
- Q6.21(c): The blades of a windmill sweep out a circle of area $A$. (c) Assume that the windmill converts 25% of the wind’s energy into electrical energy, and that $A = 30 \text{ m}^2$, $v = 36 \text{ km/h}$ and the density of air is $1.2 \text{ kg m}^{-3}$. What is the electrical power produced ?
- Q6.22(a): A person trying to lose weight (dieter) lifts a 10 kg mass, one thousand times, to a height of 0.5 m each time. Assume that the potential energy lost each time she lowers the mass is dissipated. (a) How much work does she do against the gravitational force ?
- Q6.22(b): A person trying to lose weight (dieter) lifts a 10 kg mass, one thousand times, to a height of 0.5 m each time. Assume that the potential energy lost each time she lowers the mass is dissipated. (b) Fat supplies $3.8 \times 10^7 \text{J}$ of energy per kilogram which is converted to mechanical energy with a 20% efficiency rate. How much fat will the dieter use up?
- Q6.23(a): A family uses 8 kW of power. (a) Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
- Q6.23(b): A family uses 8 kW of power. (b) Compare this area to that of the roof of a typical house.
- Q6.3: Given in Fig. 6.11 are examples of some potential energy functions in one dimension. The total energy of the particle is indicated by a cross on the ordinate axis. In each case, specify the regions, if any, in which the particle cannot be found for the given energy. Also, indicate the minimum total energy the particle must have in each case. Think of simple physical contexts for which these potential energy shapes are relevant.
- Q6.4: The potential energy function for a particle executing linear simple harmonic motion is given by $V(x) = \frac{kx^2}{2}$, where $k$ is the force constant of the oscillator. For $k = 0.5 \text{ N m}^{-1}$, the graph of $V(x)$ versus $x$ is shown in Fig. 6.12. Show that a particle of total energy 1 J moving under this potential must ‘turn back’ when it reaches $x = \pm 2$ m.
- Q6.5(a): Answer the following : (a) The casing of a rocket in flight burns up due to friction. At whose expense is the heat energy required for burning obtained? The rocket or the atmosphere?
- Q6.5(b): Answer the following : (b) Comets move around the sun in highly elliptical orbits. The gravitational force on the comet due to the sun is not normal to the comet’s velocity in general. Yet the work done by the gravitational force over every complete orbit of the comet is zero. Why ?
- Q6.5(c): Answer the following : (c) An artificial satellite orbiting the earth in very thin atmosphere loses its energy gradually due to dissipation against atmospheric resistance, however small. Why then does its speed increase progressively as it comes closer and closer to the earth ?
- Q6.5(d): Answer the following : (d) In Fig. 6.13(i) the man walks 2 m carrying a mass of 15 kg on his hands. In Fig. 6.13(ii), he walks the same distance pulling the rope behind him. The rope goes over a pulley, and a mass of 15 kg hangs at its other end. In which case is the work done greater ?
- Q6.6(a): Underline the correct alternative : (a) When a conservative force does positive work on a body, the potential energy of the body...
- Q6.6(b): Underline the correct alternative : (b) Work done by a body against friction always results in a loss of its...
- Q6.6(c): Underline the correct alternative : (c) The rate of change of total momentum of a many-particle system is proportional to the...
- Q6.6(d): Underline the correct alternative : (d) In an inelastic collision of two bodies, the quantities which do not change after the collision are the...
- Q6.7(a): State if each of the following statements is true or false. Give reasons for your answer. (a) In an elastic collision of two bodies, the momentum and energy of each body is conserved.
- Q6.7(b): State if each of the following statements is true or false. Give reasons for your answer. (b) Total energy of a system is always conserved, no matter what internal and external forces on the body are present.
- Q6.7(c): State if each of the following statements is true or false. Give reasons for your answer. (c) Work done in the motion of a body over a closed loop is zero for every force in nature.
- Q6.7(d): State if each of the following statements is true or false. Give reasons for your answer. (d) In an inelastic collision, the final kinetic energy is always less than the initial kinetic energy of the system.
- Q6.8(a): Answer carefully, with reasons : (a) In an elastic collision of two billiard balls, is the total kinetic energy conserved during the short time of collision of the balls (i.e. when they are in contact) ?
- Q6.8(b): Answer carefully, with reasons : (b) Is the total linear momentum conserved during the short time of an elastic collision of two balls ?
- Q6.8(c): Answer carefully, with reasons : (c) What are the answers to (a) and (b) for an inelastic collision ?
- Q6.8(d): Answer carefully, with reasons : (d) If the potential energy of two billiard balls depends only on the separation distance between their centres, is the collision elastic or inelastic ? (Note, we are talking here of potential energy corresponding to the force during collision, not gravitational potential energy).
- Q6.9: A body is initially at rest. It undergoes one-dimensional motion with constant acceleration. The power delivered to it at time $t$ is proportional to
Chapters in CBSE - Class 11 Physics
Top Tutors who teach Work
I teach maths and science of class 9th and 10th. Have been teaching for last 6 years. I assure the result of student to be the best. My best results of the previous few years are as follows. 100/100 in maths Nakul Sharna. 99/100 in maths Alok khandelwal.
I am a Mathematics Teacher with 20 years of teaching experience currently teaching at Paradise School, Zira. I speak English, Hindi and Punjabi. I teach classes 10-12 and I am able to provide both group sessions and online one to one classes. I am qualified in M.Sc of Mathematics, B.Ed, MCA.
Sir was very helpful throughout my class, he teaches very good and explains every question again and again if we don't understand. Overall it was very good.
As a passionate mathematics teacher, I have always enjoyed imparting knowledge to others. I am a B.Tech graduate in Electronics and Communication. I have been teaching mathematics for over four years, and my love for the subject has grown stronger with time. I started teaching as a part-time tutor while pursuing my engineering degree and fell in love with the profession. After completing my degree, I worked with Byjus, one of the leading Edtech companies in India, as a mathematics teacher for two years. While I enjoyed my time at Byju's, I could do more as a teacher and wanted to explore new avenues. I joined Vedantu, an online learning platform, where I have been teaching mathematics for the last two years. I started my journey as a math teacher out of pure passion. Mathematics has always been my favourite subject, and I enjoyed solving problems and equations from a young age. As I grew older, I realised I had a natural talent for teaching, and I decided to pursue it as a career. Currently, I provide mathematics classes for students from sixth to twelfth for all boards, including ICSE, CBSE, and West Bengal. I teach offline and online classes, each lasting for one and a half hours. I use interactive tools such as Zoom, Pentab, and One Note to make my lessons engaging and interactive for my students. To help my students excel in mathematics, I provide them with reference books, notes, and in-built assignments to test their knowledge. I also conduct monthly tests to assess their progress and identify improvement areas. Teaching on UrbanPro has allowed me to interact with students from different parts of the country and help them realise their full potential in mathematics. I want to continue making a positive impact in the lives of my students and help them develop a love for mathematics, just like I did
Sirs class is very interactive, explains each topic in detail making it crystal clear for the student to understand and learn. Always approachable and is ready to clear doubts anytime.
I am Geoscientist and a graduate from IIT Roorkee. I have been teaching since 2014 while attending my B.Tech + M.Tech at IIT. I am passionate about sharing my knowledge to enable students understand mathematics and physics with clarity. My students have qualified JEE. I would love to give you a demo and let you decide.
One of the best teacher I have ever come across who makes learning conceptual as well as fun. My whole hearted recommendation.
Teaching concepts from basics, and giving ample examples and practice problems help students to understand the subject better. Conducting tests and helping them with time management and fast calculations. Helping them memorise better with mnemonics and brain maps. Giving them advices to practice good habits which help them with their all round development.
He is very good, my son is gaining a lot from his dedicated coaching and guidance. His fear of maths is now gradually getting over.
Other Subjects in CBSE - Class 11
Download free CBSE - Class 11 Physics Work EXERCISES worksheets
Download Now