- Module 7 – 8051 Microcontroller – Practical Applications – 16 ~ 17 Hours
Pre-requisite for this module:
- Understanding of Basic Electronics, Usage of electronic components in circuits, usage of bread boards and multimeter
- Practical knowledge of using Keil 8051 Compiler and flash utilities to flash the code
- Interface of various inputs/output devices including 16x2 LCD display, 4x4 keypad, usage of L293 board and electromechanical devices
- Practical knowledge of timer/external interrupts
- It is strongly recommended that students bring their own laptop. You’ll preserve your work and you’ll have all the development environment set up for you to work even after your course(s)
Working Kit Contents:
- 8051 Development Board, USBASP SPI Flashing Board, 5V Relay Boards, DTMF Decoder Board, RF Encoder/Decoder Boards, RFID Reader Module, RFID Tags, Sony IR Remote, 16x2 Character LCD display, PIR Sensor, SR04 Ultrasound Distance Sensor, tinyRTC Board, LM35 Temperature Sensor, LDR (Light Dependant Resistor), Breadboard, LEDs, RGB LEDs, Resistors, Potentiometer, 8x8 Dot Matrix Display, 7-Segment Display, Tactile switch, Rocker switch, Piezo Electric Buzzer, Connecting Wires, Batteries
What you’ll learn:
- Interface a 8 bit ADC and understand how this can be used to digitize an analog signal like temperature output from LM35
- I2C/SMBUS
- RF Encoder/Decoder using HT12D/E with RF Tx/Rx boards for RF communication.
- DTMF decoding and how this can be used to control robot using a mobile phone
- Interface EM18, A RFID detector and decode RFID Tags and build an employee attendance system
- Concept of relays and how they can used to switch high voltage appliances
Measure temperature using ADC0804 and display on 16x2 LCD display – 3 Hours
- Interface tinyRTC board and display real time clock on 16x2 LCD display – 3 Hours
- Understand what I2C bus and how to program I2C/SMBUS devices
- Electronic Voting Machine - 2 Hours
- Interface a serial EM18 RFID and display the IDs on CD screen- 2 Hours
- Motion based Smart Home Controls - 1 Hour
- AC lights using relays
- RF Controlled Robot – 2 hours
- Mobile controlled home appliances - 3 Hours
- Using DTMF decoder