Find the best tutors and institutes for Class 11 Tuition
Q12.6(b):
Two cylinders A and B of equal capacity are connected to each other via a stopcock. A contains a gas at standard temperature and pressure. B is completely evacuated. The entire system is thermally insulated. The stopcock is suddenly opened. Answer the following : (b) What is the change in internal energy of the gas ?
Solution :
Step 1: Identifying System Parameters
The system consists of two cylinders, $A$ and $B$, of equal capacity ($V_A = V_B = V$). Cylinder $A$ initially contains an ideal gas at standard temperature and pressure ($STP$), while cylinder $B$ is perfectly evacuated. The system is described as thermally insulated [Per the definition of an adiabatic system, where $dQ = 0$].
Step 2: Analysis of Thermodynamic Constraints
When the stopcock is opened, the gas expands from cylinder $A$ to fill the combined volume of both cylinders ($V_{total} = V_A + V_B = 2V$). Since the system is thermally insulated from the surroundings, there is no heat exchange ($dQ = 0$).
Furthermore, as the gas expands into a vacuum (cylinder $B$), it does not perform any work against an external pressure ($P_{ext} = 0$). [Per the work-energy theorem for gases, $dW = P_{ext}dV$. Since $P_{ext} = 0$, $dW = 0$]. This process is known as Joule expansion or free expansion.
Step 3: Application of the First Law of Thermodynamics
The First Law of Thermodynamics is mathematically expressed as:
$dU = dQ - dW$
Where:
- $dU$ is the change in internal energy of the system.
- $dQ$ is the heat exchanged by the system with the surroundings.
- $dW$ is the work done by the system.
Substituting the identified constraints for free adiabatic expansion:
$dQ = 0$
$dW = 0$
Therefore:
$dU = 0 - 0$
$dU = 0$
Step 4: Theoretical Conclusion
For an ideal gas, the internal energy ($U$) is purely a function of temperature ($T$). Since $dU = 0$ in free expansion, the temperature of the gas remains constant ($dT = 0$). Consequently, the internal energy remains invariant during this process.
Final Solution: The change in internal energy ($\Delta U$) of the gas is $0$.
More Questions from Class 11 Physics Thermodynamics EXERCISES
- Q5.1: Choose the correct answer. A thermodynamic state function is a quantity
- Q5.10: Calculate the enthalpy change on freezing of 1.0 mol of water at (10.0^{\circ}\text{C}) to ice at (–10.0^{\circ}\text{C}). (\Delta_{\text{fus}}H = 6.03 \text{ kJ mol}^{-1}) at (0^{\circ}\text{C}). (C_{p} [\text{H}_{2}\text{O(l)}] = 75.3 \text{ J mol}^{-1} \text{ K}^{-1}) (C_{p} [\text{H}_{2}\text{O(s)}] = 36.8 \text{ J mol}^{-1} \text{ K}^{-1})
- Q5.11: Enthalpy of combustion of carbon to (\text{CO}_{2}) is (–393.5 \text{ kJ mol}^{-1}). Calculate the heat released upon formation of 35.2 g of (\text{CO}_{2}) from carbon and dioxygen gas.
- Q5.12: Enthalpies of formation of (\text{CO(g)}), (\text{CO}_{2}(\text{g})), (\text{N}_{2}\text{O(g)}) and (\text{N}_{2}\text{O}_{4}(\text{g})) are –110, – 393, 81 and (9.7 \text{ kJ mol}^{-1}) respectively. Find the value of (\Delta_{r}H) for the reaction: (\text{N}_{2}\text{O}_{4}(\text{g}) + 3\text{CO(g)} \rightarrow \text{N}_{2}\text{O(g)} + 3\text{CO}_{2}(\text{g}))
- Q5.13: Given (\text{N}_{2}(\text{g}) + 3\text{H}_{2}(\text{g}) \rightarrow 2\text{NH}_{3}(\text{g}); \Delta_{r}H^{\ominus} = –92.4 \text{ kJ mol}^{-1}) What is the standard enthalpy of formation of (\text{NH}_{3}) gas?
- Q5.14: Calculate the standard enthalpy of formation of (\text{CH}_{3}\text{OH(l)}) from the following data: (\text{CH}_{3}\text{OH (l)} + \frac{3}{2} \text{O}_{2}(\text{g}) \rightarrow \text{CO}_{2}(\text{g}) + 2\text{H}_{2}\text{O(l)}) ; (\Delta_{r}H^{\ominus} = –726 \text{ kJ mol}^{-1}) (\text{C(graphite)} + \text{O}_{2}(\text{g}) \rightarrow \text{CO}_{2}(\text{g})) ; (\Delta_{c}H^{\ominus} = –393 \text{ kJ mol}^{-1}) (\text{H}_{2}(\text{g}) + \frac{1}{2} \text{O}_{2}(\text{g}) \rightarrow \text{H}_{2}\text{O(l)}); (\Delta_{f}H^{\ominus} = –286 \text{ kJ mol}^{-1}).
- Q5.15: Calculate the enthalpy change for the process (\text{CCl}_{4}(\text{g}) \rightarrow \text{C(g)} + 4 \text{Cl(g)}) and calculate bond enthalpy of C – Cl in (\text{CCl}_{4}(\text{g})). (\Delta_{\text{vap}}H^{\ominus}(\text{CCl}_{4}) = 30.5 \text{ kJ mol}^{-1}). (\Delta_{f}H^{\ominus} (\text{CCl}_{4}) = –135.5 \text{ kJ mol}^{-1}). (\Delta_{a}H^{\ominus} (\text{C}) = 715.0 \text{ kJ mol}^{-1}), where (\Delta_{a}H^{\ominus}) is enthalpy of atomisation (\Delta_{a}H^{\ominus} (\text{Cl}_{2}) = 242 \text{ kJ mol}^{-1})
- Q5.16: For an isolated system, (\Delta U = 0), what will be (\Delta S) ?
- Q5.17: For the reaction at 298 K, (2A + B \rightarrow C) (\Delta H = 400 \text{ kJ mol}^{-1}) and (\Delta S = 0.2 \text{ kJ K}^{-1} \text{ mol}^{-1}) At what temperature will the reaction become spontaneous considering (\Delta H) and (\Delta S) to be constant over the temperature range.
- Q5.18: For the reaction, (2 \text{Cl(g)} \rightarrow \text{Cl}_{2}(\text{g})), what are the signs of (\Delta H) and (\Delta S) ?
- Q5.19: For the reaction (2 \text{A(g)} + \text{B(g)} \rightarrow 2\text{D(g)}) (\Delta U^{\ominus} = –10.5 \text{ kJ}) and (\Delta S^{\ominus} = –44.1 \text{ JK}^{-1}). Calculate (\Delta G^{\ominus}) for the reaction, and predict whether the reaction may occur spontaneously.
- Q5.2: For the process to occur under adiabatic conditions, the correct condition is:
- Q5.20: The equilibrium constant for a reaction is 10. What will be the value of (\Delta G^{\ominus}) ? (R = 8.314 \text{ JK}^{-1} \text{ mol}^{-1}), (T = 300 \text{ K}).
- Q5.21: Comment on the thermodynamic stability of (\text{NO(g)}), given (\frac{1}{2} \text{N}_{2}(\text{g}) + \frac{1}{2}\text{O}_{2}(\text{g}) \rightarrow \text{NO(g)}); (\Delta_{r}H^{\ominus} = 90 \text{ kJ mol}^{-1}) (\text{NO(g)} + \frac{1}{2}\text{O}_{2}(\text{g}) \rightarrow \text{NO}_{2}(\text{g}): \Delta_{r}H^{\ominus}= –74 \text{ kJ mol}^{-1})
- Q5.22: Calculate the entropy change in surroundings when 1.00 mol of (\text{H}_{2}\text{O(l)}) is formed under standard conditions. (\Delta_{f}H^{\ominus} = –286 \text{ kJ mol}^{-1}).
- Q5.3: The enthalpies of all elements in their standard states are:
- Q5.4: (\Delta U^{\ominus}) of combustion of methane is (– X \text{ kJ mol}^{-1}). The value of (\Delta H^{\ominus}) is
- Q5.5: The enthalpy of combustion of methane, graphite and dihydrogen at 298 K are, (–890.3 \text{ kJ mol}^{-1}), (–393.5 \text{ kJ mol}^{-1}), and (–285.8 \text{ kJ mol}^{-1}) respectively. Enthalpy of formation of (\text{CH}_{4}(\text{g})) will be
- Q5.6: A reaction, (A + B \rightarrow C + D + q) is found to have a positive entropy change. The reaction will be
- Q5.7: In a process, 701 J of heat is absorbed by a system and 394 J of work is done by the system. What is the change in internal energy for the process?
- Q5.8: The reaction of cyanamide, (\text{NH}_{2}\text{CN (s)}), with dioxygen was carried out in a bomb calorimeter, and (\Delta U) was found to be (–742.7 \text{ kJ mol}^{-1}) at 298 K. Calculate enthalpy change for the reaction at 298 K. (\text{NH}_{2}\text{CN(g)} + \frac{3}{2}\text{O}_{2}(\text{g}) \rightarrow \text{N}_{2}(\text{g}) + \text{CO}_{2}(\text{g}) + \text{H}_{2}\text{O(l)})
- Q5.9: Calculate the number of kJ of heat necessary to raise the temperature of 60.0 g of aluminium from (35^{\circ}\text{C}) to (55^{\circ}\text{C}). Molar heat capacity of Al is (24 \text{ J mol}^{-1} \text{ K}^{-1}).
- Q12.1: A geyser heats water flowing at the rate of 3.0 litres per minute from $27^\circ C$ to $77^\circ C$. If the geyser operates on a gas burner, what is the rate of consumption of the fuel if its heat of combustion is $4.0 \times 10^4 J/g$ ?
- Q12.10: A refrigerator is to maintain eatables kept inside at $9^\circ C$. If room temperature is $36^\circ C$, calculate the coefficient of performance.
- Q12.2: What amount of heat must be supplied to $2.0 \times 10^{-2}$ kg of nitrogen (at room temperature) to raise its temperature by $45^\circ C$ at constant pressure ? (Molecular mass of $N_2 = 28$; $R = 8.3 J mol^{-1} K^{-1}$.)
- Q12.3(a): Explain why (a) Two bodies at different temperatures $T_1$ and $T_2$ if brought in thermal contact do not necessarily settle to the mean temperature $(T_1 + T_2)/2$.
- Q12.3(b): Explain why (b) The coolant in a chemical or a nuclear plant (i.e., the liquid used to prevent the different parts of a plant from getting too hot) should have high specific heat.
- Q12.3(c): Explain why (c) Air pressure in a car tyre increases during driving.
- Q12.3(d): Explain why (d) The climate of a harbour town is more temperate than that of a town in a desert at the same latitude.
- Q12.4: A cylinder with a movable piston contains 3 moles of hydrogen at standard temperature and pressure. The walls of the cylinder are made of a heat insulator, and the piston is insulated by having a pile of sand on it. By what factor does the pressure of the gas increase if the gas is compressed to half its original volume ?
- Q12.5: In changing the state of a gas adiabatically from an equilibrium state A to another equilibrium state B, an amount of work equal to 22.3 J is done on the system. If the gas is taken from state A to B via a process in which the net heat absorbed by the system is 9.35 cal, how much is the net work done by the system in the latter case ? (Take 1 cal = 4.19 J)
- Q12.6(a): Two cylinders A and B of equal capacity are connected to each other via a stopcock. A contains a gas at standard temperature and pressure. B is completely evacuated. The entire system is thermally insulated. The stopcock is suddenly opened. Answer the following : (a) What is the final pressure of the gas in A and B ?
- Q12.6(c): Two cylinders A and B of equal capacity are connected to each other via a stopcock. A contains a gas at standard temperature and pressure. B is completely evacuated. The entire system is thermally insulated. The stopcock is suddenly opened. Answer the following : (c) What is the change in the temperature of the gas ?
- Q12.6(d): Two cylinders A and B of equal capacity are connected to each other via a stopcock. A contains a gas at standard temperature and pressure. B is completely evacuated. The entire system is thermally insulated. The stopcock is suddenly opened. Answer the following : (d) Do the intermediate states of the system (before settling to the final equilibrium state) lie on its P-V-T surface ?
- Q12.7: A steam engine delivers $5.4 \times 10^8 J$ of work per minute and services $3.6 \times 10^9 J$ of heat per minute from its boiler. What is the efficiency of the engine? How much heat is wasted per minute?
- Q12.8: An electric heater supplies heat to a system at a rate of 100W. If system performs work at a rate of 75 joules per second. At what rate is the internal energy increasing?
- Q12.9: A thermodynamic system is taken from an original state to an intermediate state by the linear process shown in Fig. (12.13). Its volume is then reduced to the original value from E to F by an isobaric process. Calculate the total work done by the gas from D to E to F.
CBSE Solutions for Class 11 Physics Thermodynamics
Chapters in CBSE - Class 11 Physics
Top Tutors who teach Thermodynamics
Top Tutor
Malviya Nagar, Delhi
15 yrs of
Exp
7 students
3 hrs of classes completed
400
per hour
Student's Home
I have 15 years experience in home tuition
I have taken tutions from Ramesh Sir and he always made it sure to clarify all my account related doubts. Best part is he is available 24*7 to solve all the queries and he is one of the best faculty in Delhi for accounts.
Super Tutor
Mulund East, Mumbai
20 yrs of
Exp
6 students
598 hrs of classes completed
1500
per hour
Online Classes
Student's Home
Tutor's home
I have been teaching students for the last 20 years. Many of my students had passed with more than 95% marks or higher grade. I always love interactive classes so always motivate my students to ask as many questions as they can.Once the teaching process becomes dialogue from monologue then I understand that half of the task has been done and thereafter concept building process becomes very easy as I constantly guided by the questions from my students. Keeping class regularly on time, solving questions everyday, clearing doubts on a regular basis and lastly keeping weekly test make it very simple to make a good score.
His teaching methods are great. Very clear and concise. Always lectures with the intent to help you understand the material. He’s helped me understand content for chemistry and is one of the best teacher that I’ve had. Recommending her/him is a no brainer.
Top Tutor
Anna Nagar Mullai Nagar, Chennai
9 yrs of
Exp
6 students
420 hrs of classes completed
600
per hour
Online Classes
Hi, I'm Kalaiselvi, an M.Sc. Mathematics graduate with 9 years of experience in one-on-one online Maths tutoring. I specialize in teaching Classes 10, 11, and 12 for CBSE and Tamil Nadu State Board. My classes are conducted in both English and Tamil (bilingual), making concepts easy to understand. I focus on concept clarity, problem-solving, regular practice, and exam preparation, with personalized attention for every student.
Great experience with Kalaiselvi Ma'am, her knowledge and skill on the subject are amazing. Thank you for your support and guidance.
Super Tutor
Jayanagar East, Bangalore
4 yrs of
Exp
47 students
5887 hrs of classes completed
250
per hour
Online Classes
Tutor's home
I take classes for grade 11 of Karnataka State PUC, CBSE, ISC, NIOS and Cambridge or IGCSE AS Levels. I have 4 years of teaching experience.
Attending this introductory chemistry demonstration session offered an insightful look into the program's academic standard. The instructor demonstrated excellent command of the subject matter, skillfully translating intricate chemical principles into accessible intellectual concepts.
Top Tutor
Panchkula Extension, Panchkula
4 yrs of
Exp
2 students
425 hrs of classes completed
500
per hour
Online Classes
I am Aaina Nandal, an experienced, qualified teacher and tutor, worked as an Assistant Professor in an engineering college. With a dynamic and engaging teaching style, I strive to create an environment where curiosity is nurtured, and knowledge is not just acquired but embraced. Education is not just about memorizing facts; it's about understanding and applying knowledge. I am deeply passionate about my subjects, and I bring that enthusiasm into every lesson. Recognizing that every student is unique, my teaching methodology is adaptive. I tailor lessons to suit individual learning styles, ensuring that each student progresses at their own pace. My classes are designed to be interactive and exciting, encouraging students to actively participate and enjoy the learning process. My goal is to equip students with the skills they need to thrive in all aspects of life. • Who Can Benefit High school students aiming for academic excellence. College students seeking additional support or a fresh perspective. Online tuition classes for students with backlogs, year-back students for the subject or topics of their need with one-to-one teaching. The syllabus will be covered in detail to make the student understand the concepts correctly. Last minute preparation/ crash course classes can also be conducted upon request for any subject. I can hold tuition classes for engineering subjects as per syllabus during weekends and semester vacation Please feel free to ask for a free demo online class Courses Offered: • B.Tech (All ECE Subjects and 1st year subjects which is common to all branches. • Diploma (Branch-ECE) • UGC-NET (Paper 1 & Paper 2 (Electronic Science)) • Class IX-X (Subjects: Mathematics & Science) • Class XI-XII ( Subjects: Mathematics ) • Class XI-XII ( Subjects: Computer science & Informatics Practices)
Really loved the way she teaches. She gives full attention to achieve best grades. The way she makes you understand every basic is commendable. Highly recommended!!
