Your Worksheet is Ready
CBSE - Class 11 Chemistry Hydrocarbons Worksheet
Explain why the following systems are not aromatic?
(iii) 
Which of the following compound CANNOT be prepared by Wurtz reaction
Methane
b.Ethane
c.Propane
d.Butane
1-chloropropane on treatment with alc. KoH produces
Propane
b.Propene
c.Propyne
d.Propyl alcohol
Worksheet Answers
Solution:
For a cyclic, planar molecule to be classified as aromatic, it must satisfy the following criteria [Per Hückel’s Criteria]:
The provided structure consists of a cyclooctatetraene ring containing four double bonds, totaling $8$ $\pi$-electrons.
Counting the $\pi$-electrons in the ring:
The molecule cyclooctatetraene is not planar [Per Steric Strain Analysis]. Due to the bond angles of an octagon, the molecule adopts a "tub-shaped" conformation to minimize angle strain and transannular interactions. By losing planarity, the p-orbitals are unable to maintain continuous parallel alignment, which effectively breaks the conjugation [Per Molecular Orbital Theory].
| Criterion | Status | Justification |
|---|---|---|
| Cyclic | Yes | Closed ring of 8 carbons. |
| Planar | No | Molecule adopts non-planar tub conformation. |
| Conjugated | No | Non-planarity prevents continuous orbital overlap. |
| $4n+2$ electrons | No | Contains $8 \pi$-electrons ($4n$ system). |
Final Solution: The system is not aromatic because it possesses $8$ $\pi$-electrons (violating the $4n+2$ rule) and adopts a non-planar "tub" geometry, which prevents the continuous delocalization of electrons required for aromaticity.
Solution:
Ozonolysis involves the cleavage of a carbon-carbon double bond ($C=C$) in an alkene to form two carbonyl compounds. The reaction is represented by the process: $R_2C=CR'_2 \xrightarrow{O_3, Zn/H_2O} R_2C=O + O=CR'_2$. [Per the Criegee Mechanism of Ozonolysis].
The given products are:
To determine the structure of the original alkene ‘$A$’, we must remove the oxygen atoms from the carbonyl groups of the products and join the remaining carbon atoms with a double bond.
Let the carbonyl carbons be denoted as $C_\alpha$ and $C_\beta$:
By joining these fragments at the double bond position:
$CH_3-CH = C(CH_2CH_3)_2$
The structure is $CH_3-CH=C(C_2H_5)_2$.
Thus, the IUPAC name is 3-ethylpent-2-ene.
Reaction: $CH_3-CH=C(CH_2CH_3)_2 \xrightarrow{O_3, Zn/H_2O} CH_3CHO + O=C(CH_2CH_3)_2$
This matches the products provided in the problem statement perfectly. [By the Principle of Retrosynthetic Analysis].
Final Solution: The structure of ‘$A$’ is $CH_3-CH=C(CH_2CH_3)_2$ and its IUPAC name is 3-ethylpent-2-ene.
Solution:
Benzene ($C_6H_6$) is a cyclic, planar molecule where each carbon atom is $sp^2$ hybridized. The six carbon atoms form a ring, with each carbon contributing one $p$-orbital containing one electron to a delocalized $\pi$-electron cloud. [Per Hückel’s Rule for aromaticity ($4n+2$ $\pi$-electrons), where $n=1$, benzene possesses a stable, delocalized electron-rich cloud above and below the plane of the ring].
The $\pi$-electron cloud of benzene is highly electron-dense, making the ring inherently nucleophilic. Electrophiles ($E^+$), which are electron-deficient species, are strongly attracted to this region of high electron density.
Nucleophiles are electron-rich species ($Nu^-$ or $Nu:^-$). The interaction between a nucleophile and the benzene ring is inhibited by two primary factors:
| Feature | Electrophilic Substitution | Nucleophilic Substitution |
|---|---|---|
| Attacking Species | Electrophile ($E^+$) | Nucleophile ($Nu^-$) |
| Interaction | Attraction to electron-rich $\pi$-cloud | Repulsion by electron-rich $\pi$-cloud |
| Feasibility | High (occurs under mild conditions) | Low (requires drastic conditions/withdrawing groups) |
Final Solution: Benzene undergoes electrophilic substitution easily because its electron-rich $\pi$-cloud acts as a donor to electron-deficient electrophiles, restoring aromaticity in the product. It resists nucleophilic substitution because of electrostatic repulsion between the incoming nucleophile and the $\pi$-electron cloud, as well as the high energy penalty associated with disrupting the stable aromatic sextet.
Solution:
The objective is to convert ethene ($CH_2=CH_2$) into benzene ($C_6H_6$). This transformation involves a transition from a simple two-carbon alkene to a stable six-carbon aromatic hydrocarbon. The process requires a controlled polymerization mechanism followed by aromatization.
Ethene is reacted with steam in the presence of a phosphoric acid ($H_3PO_4$) catalyst at high temperature and pressure to produce ethanol.
$CH_2=CH_2 + H_2O \xrightarrow{H_3PO_4 / \Delta} CH_3CH_2OH$
[Per the mechanism of electrophilic addition/hydration of alkenes].
Ethanol is oxidized to ethanal using copper (Cu) at 573 K, which acts as a dehydrogenation catalyst.
$CH_3CH_2OH \xrightarrow{Cu, 573K} CH_3CHO + H_2$
[Per the principle of catalytic dehydrogenation of primary alcohols].
Ethanal undergoes base-catalyzed aldol condensation followed by dehydration to form crotonaldehyde, which is then further processed or effectively polymerized. However, a more direct route for the industrial conversion involves the cyclic polymerization of acetylene.
1. Bromination: Ethene reacts with Bromine to form 1,2-dibromoethane.
$CH_2=CH_2 + Br_2 \rightarrow BrCH_2-CH_2Br$
2. Dehydrohalogenation: Treatment with alcoholic $KOH$ yields ethyne (acetylene).
$BrCH_2-CH_2Br + 2KOH(alc.) \rightarrow HC\equiv CH + 2KBr + 2H_2O$
Three molecules of ethyne are passed through a red-hot iron tube at 873 K. This induces cyclotrimerization to form benzene.
$3HC\equiv CH \xrightarrow{\text{Red hot Fe tube, 873K}} C_6H_6$
[By the principle of thermal cyclotrimerization].
| Step | Reagent/Condition | Product |
|---|---|---|
| 1 | $Br_2$ | 1,2-dibromoethane |
| 2 | $Alc. KOH$ | Ethyne |
| 3 | Red hot Fe tube | Benzene |
Final Solution: Ethene is converted to benzene by first reacting with $Br_2$ to form 1,2-dibromoethane, followed by dehydrohalogenation with alcoholic $KOH$ to produce ethyne, and finally performing a cyclic trimerization of three ethyne molecules at 873 K over a red-hot iron tube to yield $C_6H_6$.
Solution:
Pentene is an alkene with the general formula $C_nH_{2n}$. For pentene, $n = 5$.
Calculation: $C_5H_{2(5)} = C_5H_{10}$.
Thus, the molecular formula for pentene is $C_5H_{10}$. [Per the General Formula for Alkenes]
The complete combustion of a hydrocarbon involves reacting it with excess oxygen ($O_2$) to produce carbon dioxide ($CO_2$) and water ($H_2O$) as the only products. The skeletal chemical equation is:
$C_xH_y + (x + \frac{y}{4})O_2 \rightarrow xCO_2 + (\frac{y}{2})H_2O$
Substituting $x = 5$ and $y = 10$ into the stoichiometric coefficients:
The balanced chemical equation is:
$C_5H_{10}(g) + \frac{15}{2}O_2(g) \rightarrow 5CO_2(g) + 5H_2O(g)$
To eliminate the fraction, multiply the entire equation by $2$:
$2C_5H_{10}(g) + 15O_2(g) \rightarrow 10CO_2(g) + 10H_2O(g)$
Final Solution: The balanced combustion reaction for pentene is $2C_5H_{10}(g) + 15O_2(g) \rightarrow 10CO_2(g) + 10H_2O(g)$.
Solution:
The chlorination of methane ($CH_4$) is a free-radical substitution reaction. The process follows a mechanism consisting of three distinct stages: Initiation, Propagation, and Termination. The formation of ethane ($C_2H_6$) is a consequence of the stochastic collision of alkyl radicals during the final stage.
Under the influence of ultraviolet light ($h\nu$) or high temperature, the chlorine molecule undergoes homolytic cleavage. This generates highly reactive chlorine free radicals:
$Cl_2 \xrightarrow{h\nu} \dot{C}l + \dot{C}l$ [Per the principle of Homolytic Fission]
The chlorine radical abstracts a hydrogen atom from methane to produce a methyl radical ($\dot{C}H_3$):
$CH_4 + \dot{C}l \rightarrow \dot{C}H_3 + HCl$
Subsequently, the methyl radical reacts with another chlorine molecule to yield chloromethane and regenerate the chlorine radical:
$\dot{C}H_3 + Cl_2 \rightarrow CH_3Cl + \dot{C}l$
Termination occurs when any two radical species present in the reaction vessel collide and combine. While the desired termination step is the combination of a methyl radical and a chlorine radical (to form $CH_3Cl$), the concentration of methyl radicals allows for the following collision:
$\dot{C}H_3 + \dot{C}H_3 \rightarrow CH_3-CH_3$ (Ethane)
[Justification: Free radical coupling is a high-energy collision process. When two alkyl radicals encounter one another in the reaction medium, they form a sigma ($\sigma$) bond to satisfy their electron octet, resulting in the formation of a higher alkane.]
The formation of ethane is an inevitable side reaction in the chlorination of methane. Because the reaction mechanism produces a high concentration of methyl radicals ($\dot{C}H_3$) as intermediates, the probability of two methyl radicals colliding is non-zero. Once this collision occurs, the coupling of the unpaired electrons results in the formation of a C—C bond, thereby producing ethane as a trace byproduct.
Final Solution: The formation of ethane occurs due to the termination step of the free-radical mechanism, where two methyl radicals ($\dot{C}H_3$) collide and combine to form a stable $CH_3-CH_3$ molecule.
Solution:
The objective is to synthesize p-nitrobromobenzene from benzene. This transformation requires two electrophilic aromatic substitution reactions: Bromination and Nitration. The sequence of these reactions is critical due to the directing effects of the substituents.
Benzene is treated with bromine in the presence of a Lewis acid catalyst, typically anhydrous aluminum bromide ($FeBr_3$ or $AlBr_3$), to form bromobenzene. This is an electrophilic aromatic substitution reaction. [Per the mechanism of electrophilic aromatic substitution]
$C_6H_6 + Br_2 \xrightarrow{FeBr_3} C_6H_5Br + HBr$
Bromine is an ortho/para directing group due to the +M (mesomeric) effect of the lone pairs on the bromine atom, which outweighs its -I (inductive) effect. When bromobenzene undergoes nitration using a mixture of concentrated nitric acid ($HNO_3$) and concentrated sulfuric acid ($H_2SO_4$), the nitro group ($-NO_2$) is introduced primarily at the para position due to steric hindrance at the ortho position. [Per the Directing Effect of Substituents in Electrophilic Aromatic Substitution]
$C_6H_5Br + HNO_3 \xrightarrow{H_2SO_4, 323-333K} C_6H_4(Br)(NO_2) + H_2O$
| Step | Reagents | Product | Regioselectivity |
|---|---|---|---|
| 1 | $Br_2 / FeBr_3$ | Bromobenzene | N/A (Monosubstitution) |
| 2 | $conc. HNO_3 / conc. H_2SO_4$ | p-nitrobromobenzene | Para-major product |
The use of $H_2SO_4$ facilitates the generation of the active electrophile, the nitronium ion ($NO_2^+$), according to the following equilibrium:
$HNO_3 + 2H_2SO_4 \rightleftharpoons NO_2^+ + H_3O^+ + 2HSO_4^-$
Final Solution: The conversion is achieved by first brominating benzene with $Br_2/FeBr_3$ to form bromobenzene, followed by nitration using concentrated $HNO_3$ and concentrated $H_2SO_4$ to yield p-nitrobromobenzene.
Solution:
To identify the number of rings or pi bonds in the molecular formula $C_4H_8$, we apply the Degree of Unsaturation (DoU) formula:
$DoU = C + 1 - \frac{H}{2} + \frac{N}{2} - \frac{X}{2}$
$DoU = 4 + 1 - \frac{8}{2} = 5 - 4 = 1$
[Per the Degree of Unsaturation principle, a value of 1 indicates either one double bond or one ring structure.]
Since the problem specifies one double bond, we must construct all possible acyclic isomers containing four carbons and one $C=C$ unit.
We generate the isomers based on the position of the double bond and the branching of the carbon chain.
| Isomer | Structural Formula | IUPAC Name |
|---|---|---|
| 1 | $CH_2=CH-CH_2-CH_3$ | But-1-ene |
| 2 | $CH_3-CH=CH-CH_3$ | But-2-ene |
| 3 | $CH_2=C(CH_3)-CH_3$ | 2-Methylprop-1-ene |
Within the isomers identified, But-2-ene exhibits geometric isomerism due to restricted rotation around the $C=C$ bond. [Per the Cahn-Ingold-Prelog priority rules and geometric constraints].
Final Solution: The possible structural isomers for $C_4H_8$ are But-1-ene, But-2-ene (as cis/trans stereoisomers), and 2-Methylprop-1-ene.
Solution:
Ozonolysis involves the oxidative cleavage of an alkene ($C=C$) using ozone ($O_3$), followed by reductive workup ($Zn/H_2O$). The reaction follows the principle of "breaking the double bond and inserting oxygen atoms on each of the resulting carbonyl fragments." If we have a carbonyl fragment $R_1-C(=O)-R_2$ and $R_3-C(=O)-R_4$, the parent alkene must have been $R_1R_2C=CR_3R_4$. [Per the Criegee mechanism of ozonolysis].
The fragments provided are:
To identify the parent alkene, we remove the oxygen atoms from the carbonyl groups and connect the two carbonyl carbons with a double bond.
Fragment A ($C_3$): $CH_3-CH_2-CH=O$
Fragment B ($C_5$): $O=C(CH_2-CH_3)_2$
By joining the carbons where the oxygen atoms were bonded:
$CH_3-CH_2-CH = C(CH_2-CH_3)_2$
The resulting structure is a heptene derivative. The chain contains 7 carbons. The double bond is at position 3.
Structure: $CH_3-CH_2-CH=C(CH_2-CH_3)-CH_2-CH_3$
IUPAC Name: 3-ethylhept-3-ene
| Reactant Fragment | Original Alkene Part | Resulting Product |
|---|---|---|
| Left side of $C=C$ | $CH_3CH_2CH=$ | Propanal |
| Right side of $C=C$ | $=C(CH_2CH_3)_2$ | Pentan-3-one |
Final Solution: The alkene is 3-ethylhept-3-ene, with the structural formula $CH_3CH_2CH=C(C_2H_5)CH_2CH_3$.
Solution:
The objective is to synthesize acetophenone ($C_6H_5COCH_3$) from benzene ($C_6H_6$). This transformation requires the introduction of an acetyl group ($-COCH_3$) onto the aromatic ring. This is a classic example of an Electrophilic Aromatic Substitution (EAS) reaction, specifically, the Friedel-Crafts Acylation.
To convert benzene to acetophenone, we utilize acetyl chloride ($CH_3COCl$) in the presence of an anhydrous Lewis acid catalyst, typically aluminum chloride ($AlCl_3$).
The reaction proceeds through the generation of an acylium ion ($CH_3CO^+$), which acts as the electrophile.
Part A: Generation of the Electrophile
$CH_3COCl + AlCl_3 \rightarrow CH_3CO^+ + AlCl_4^-$ [Formation of the electrophilic acylium cation via Lewis acid-base interaction].
Part B: Electrophilic Attack on the Benzene Ring
The $\pi$-electrons of the benzene ring attack the electrophilic carbon of the acylium ion, forming a resonance-stabilized arenium ion (sigma complex).
Part C: Deprotonation
$AlCl_4^-$ removes a proton from the $sp^3$ hybridized carbon of the sigma complex, restoring the aromaticity of the ring and regenerating the $AlCl_3$ catalyst.
| Reactants | Conditions | Product |
|---|---|---|
| $C_6H_6 + CH_3COCl$ | $Anhydrous \ AlCl_3$ | $C_6H_5COCH_3 + HCl$ |
Final Solution: The conversion of benzene to acetophenone is achieved via Friedel-Crafts Acylation, using acetyl chloride ($CH_3COCl$) and anhydrous aluminum chloride ($AlCl_3$) as the catalyst.
Solution:
Identify all possible alkene structural isomers that yield 2-methylbutane upon catalytic hydrogenation. Hydrogenation involves the addition of $H_2$ across a carbon-carbon double bond ($C=C$) in the presence of a metal catalyst ($Ni, Pd, or Pt$).
The product is 2-methylbutane ($C_5H_{12}$). The parent chain consists of four carbons with a methyl group at the second position: $CH_3-CH(CH_3)-CH_2-CH_3$.
Hydrogenation of an alkene of general formula $C_nH_{2n}$ produces the corresponding alkane $C_nH_{2n+2}$. The double bond in the alkene must be located between two carbons that remain connected in the final alkane. Thus, if a double bond is placed between any two adjacent carbon atoms in the carbon skeleton of 2-methylbutane, hydrogenation will result in the same saturated alkane.
We analyze the 2-methylbutane skeleton to identify unique positions for the $C=C$ bond:
The distinct alkenes are generated by placing a double bond between adjacent carbons:
| Alkene Name | Condensed Structural Formula | Hydrogenation Product |
|---|---|---|
| 2-methylbut-1-ene | $CH_2=C(CH_3)CH_2CH_3$ | 2-methylbutane |
| 2-methylbut-2-ene | $CH_3C(CH_3)=CHCH_3$ | 2-methylbutane |
| 3-methylbut-1-ene | $CH_3CH(CH_3)CH=CH_2$ | 2-methylbutane |
Per the Markovnikov rule's reverse application, the addition of hydrogen to these unsaturated systems [Hydrogenation Mechanism: Syn-addition of $H_2$ on the metal surface] uniformly saturates the backbone to yield the branched alkane 2-methylbutane.
Final Solution: The alkenes that yield 2-methylbutane upon hydrogenation are: 2-methylbut-1-ene, 2-methylbut-2-ene, and 3-methylbut-1-ene.
Solution:
To identify the degree of substitution for each carbon atom, we first expand the condensed formula $H_3C – CH_2 – C(CH_3)_2 – CH_2 – CH(CH_3)_2$.
The expanded structural representation is:
According to the IUPAC convention for hydrocarbon skeleton classification [Per Organic Chemistry nomenclature rules]:
| Carbon Position | Connectivity | Degree | H Atoms Attached |
|---|---|---|---|
| $C_1$ (Terminal methyl) | Bonded to $C_2$ | $1^\circ$ | 3 |
| $C_2$ ($CH_2$ group) | Bonded to $C_1, C_3$ | $2^\circ$ | 2 |
| $C_3$ (Central quaternary C) | Bonded to $C_2, C_4$ and two methyls | $4^\circ$ | 0 |
| Methyls on $C_3$ (x2) | Bonded only to $C_3$ | $1^\circ$ | 3 each (Total 6) |
| $C_4$ ($CH_2$ group) | Bonded to $C_3, C_5$ | $2^\circ$ | 2 |
| $C_5$ (Methine group) | Bonded to $C_4$ and two methyls | $3^\circ$ | 1 |
| Methyls on $C_5$ (x2) | Bonded only to $C_5$ | $1^\circ$ | 3 each (Total 6) |
Based on the identification above:
Final Solution: The molecule contains five $1^\circ$ carbons (15 H), two $2^\circ$ carbons (4 H), one $3^\circ$ carbon (1 H), and one $4^\circ$ carbon (0 H).
Solution:
The given molecular structure is $CH_2=CH-C \equiv C-CH_3$. The carbon skeleton consists of 5 carbon atoms arranged in a linear chain.
Per the IUPAC nomenclature rules for unsaturated hydrocarbons containing both double and triple bonds:
Final Solution: Pent-1-en-3-yne
Solution:
The compound provided is Pent-2-ene. Its structural formula is $CH_3-CH_2-CH=CH-CH_3$. Ozonolysis is an oxidative cleavage reaction involving the addition of ozone ($O_3$) to the carbon-carbon double bond, followed by reductive cleavage using zinc dust ($Zn/H_2O$) to produce carbonyl compounds.
The ozone molecule adds across the double bond of Pent-2-ene to form an unstable cyclic intermediate known as a molozonide, which undergoes rearrangement to form a stable ozonide structure.
Reaction: $CH_3CH_2CH=CHCH_3 + O_3 \rightarrow \text{Ozonide Intermediate}$
The ozonide is treated with $Zn/H_2O$. This step splits the $C-C$ bond where the double bond existed, forming two carbonyl fragments. The zinc reacts with $H_2O_2$ (byproduct) to prevent further oxidation of the products [Per the mechanism of reductive ozonolysis].
The reaction equation is as follows:
$CH_3CH_2CH=CHCH_3 \xrightarrow[Zn/H_2O]{O_3} CH_3CH_2CHO + CH_3CHO$
| Reactant | Bond Cleaved | Product A | Product B |
|---|---|---|---|
| Pent-2-ene | $C_2=C_3$ | Propanal | Ethanal |
Final Solution: The products obtained by the ozonolysis of Pent-2-ene are Propanal and Ethanal.
Solution:
Formula: $C_5H_8$
Constraint: One triple bond (Alkyne degree of unsaturation: $2$)
The general formula for an alkyne is $C_nH_{2n-2}$. For $n=5$, $C_5H_{2(5)-2} = C_5H_8$. This confirms the presence of one triple bond [Per the Degree of Unsaturation formula: $DU = C + 1 - \frac{H}{2} = 5 + 1 - 4 = 2$].
We rearrange the carbon backbone to place the triple bond at different terminal or internal positions.
We reduce the parent chain length to 4 carbons and place a methyl substituent.
| Structural Formula | IUPAC Name |
|---|---|
| $CH \equiv C - CH_2 - CH_2 - CH_3$ | Pent-1-yne |
| $CH_3 - C \equiv C - CH_2 - CH_3$ | Pent-2-yne |
| $CH \equiv C - CH(CH_3) - CH_3$ | 3-Methylbut-1-yne |
Final Solution: The three possible structural isomers for $C_5H_8$ containing one triple bond are Pent-1-yne, Pent-2-yne, and 3-Methylbut-1-yne.
Solution:
First, we expand the condensed structural formula to identify the longest continuous carbon chain containing the maximum number of double bonds. The given structure is:
$CH_3 – CH = CH – CH(C_2H_5) – CH_2 – CH = CH – CH_2 – CH = CH_2$
Expanding the ethyl group ($C_2H_5$):
CH3
|
CH2
|
CH3—CH=CH—CH—CH2—CH=CH—CH2—CH=CH2
1 2 3 4 5 6 7 8 9 10
The longest carbon chain is 10 carbons long (Deca-). [Per IUPAC nomenclature rules for polyenes, the parent chain must include all double bonds if possible].
We must number the chain to give the lowest locants to the double bonds (alkene functionalities).
Path A (Left to Right): $1, 3, 5, 8$ (Double bonds at $C1, C3, C6, C8$ is incorrect, let's re-verify):
Comparing the sets: $(1, 3, 6, 8)$ is lower than $(1, 4, 6, 8)$. [Per the Lowest Locant Rule for multiple bonds].
Based on the Left-to-Right numbering (1 to 10):
Following the syntax: [Substituent Name] + [Parent Chain Prefix] + [Unsaturation Locants] + [Suffix].
Concatenating these elements: 4-ethyldeca-1,3,6,8-tetraene.
Final Solution: 4-ethyldeca-1,3,6,8-tetraene
Solution:
To convert benzene into $m$-nitrochlorobenzene, we must introduce two substituents: a chloro group ($-Cl$) and a nitro group ($-NO_2$). In the target molecule, these groups are in the meta position relative to each other. We must follow the rules of Electrophilic Aromatic Substitution (EAS) and the directing nature of functional groups.
Therefore, we must introduce the nitro group first to ensure the subsequent chlorination occurs at the meta position.
Reaction 1: Nitration of Benzene
Benzene is treated with a mixture of concentrated $HNO_3$ and concentrated $H_2SO_4$ at $323-333\text{ K}$ to produce nitrobenzene.
$C_6H_6 + HNO_3 \xrightarrow{conc. H_2SO_4} C_6H_5NO_2 + H_2O$
Reaction 2: Chlorination of Nitrobenzene
Nitrobenzene is treated with chlorine ($Cl_2$) in the presence of a Lewis acid catalyst, anhydrous $FeCl_3$, to produce $m$-nitrochlorobenzene.
$C_6H_5NO_2 + Cl_2 \xrightarrow{anhydrous FeCl_3} C_6H_4(NO_2)Cl + HCl$
| Step | Mechanism | Directing Effect |
|---|---|---|
| 1 | Nitration (Electrophilic substitution) | Benzene is unsubstituted |
| 2 | Chlorination (Electrophilic substitution) | $-NO_2$ is a meta-director |
By performing the nitration first, the ring becomes deactivated and meta-directed for the subsequent chlorination, allowing the $Cl$ atom to occupy the meta position relative to the $NO_2$ group.
Final Solution: Benzene $\xrightarrow{conc. HNO_3 / conc. H_2SO_4}$ Nitrobenzene $\xrightarrow{Cl_2 / FeCl_3}$ $m$-Nitrochlorobenzene.
Solution:
For a cyclic system to be classified as aromatic, it must satisfy a set of stringent electronic and structural criteria defined by E. Hückel. These conditions determine the stability of the molecule via the delocalization of $\pi$-electrons.
The molecule must be cyclic and possess a planar or nearly planar structure. Planarity is mandatory to ensure the effective overlap of $p$-orbitals across the entire ring system, which allows for the continuous delocalization of the $\pi$-electron cloud [Per Molecular Orbital Theory].
Every atom within the ring must possess a $p$-orbital that is available for conjugation. This implies that the system must contain a continuous circuit of overlapping $p$-orbitals. If there is an $sp^3$-hybridized carbon within the ring, the conjugation is disrupted, and the molecule loses its aromatic character [By principles of resonance and orbital hybridization].
The total number of $\pi$-electrons in the cyclic system must satisfy the Hückel rule. Specifically, the system must contain a total of $(4n + 2)$ $\pi$-electrons, where $n$ is a non-negative integer ($n = 0, 1, 2, \dots$).
| Value of $n$ | Total $\pi$-electrons ($4n+2$) | Examples |
|---|---|---|
| $n = 0$ | 2 | Cyclopropenyl cation |
| $n = 1$ | 6 | Benzene ($C_6H_6$) |
| $n = 2$ | 10 | Naphthalene |
Aromatic compounds exhibit significantly higher thermodynamic stability compared to their acyclic counterparts (e.g., benzene vs. 1,3,5-hexatriene). This is quantified by the Resonance Energy. A system is aromatic if it is substantially more stable than predicted by simple additive bond energies [Based on Thermodynamic Stability Analysis].
Summary of Necessary Conditions:
Final Solution: A system is aromatic if it is cyclic, planar, possesses a continuous circuit of delocalized $p$-orbitals, and follows Hückel’s rule containing $(4n+2)$ $\pi$-electrons, where $n = 0, 1, 2, \dots$.