UrbanPro

Your Worksheet is Ready

CBSE - Class 10 Science Magnetic Effects of Electric Current Worksheet

EXERCISES

1.
Which of the following correctly describes the magnetic field near a long straight wire?
a. The field consists of straight lines perpendicular to the wire. b. The field consists of straight lines parallel to the wire. c. The field consists of radial lines originating from the wire. d. The field consists of concentric circles centred on the wire.
2.
State whether the following statements are true or false. (a) The field at the centre of a long circular coil carrying current will be parallel straight lines.
3.
At the time of short circuit, the current in the circuit
a. reduces substantially. b. does not change. c. increases heavily. d. vary continuously.
4.
State whether the following statements are true or false. (b) A wire with a green insulation is usually the live wire of an electric supply.
5.
State the rule to determine the direction of a (ii) force experienced by a current-carrying straight conductor placed in a magnetic field which is perpendicular to it,
6.
When does an electric short circuit occur?
7.
List two methods of producing magnetic fields.
8.
When is the force experienced by a current–carrying conductor placed in a magnetic field largest?
9.
State the rule to determine the direction of a (iii) current induced in a coil due to its rotation in a magnetic field.
10.
Imagine that you are sitting in a chamber with your back to one wall. An electron beam, moving horizontally from back wall towards the front wall, is deflected by a strong magnetic field to your right side. What is the direction of magnetic field?
11.
State the rule to determine the direction of a (i) magnetic field produced around a straight conductor-carrying current,
12.
What is the function of an earth wire? Why is it necessary to earth metallic appliances?

Worksheet Answers

1.

Solution:

Theoretical Foundation: Oersted's Law and the Right-Hand Thumb Rule

The magnetic field produced by a long, straight, current-carrying conductor is governed by the Biot-Savart Law. For a wire carrying a steady current $I$, the magnetic field lines manifest as a series of concentric circles centered on the wire. The intensity and direction are defined as follows:

  • Magnitude: The strength of the magnetic field ($B$) is directly proportional to the current ($I$) flowing through the wire and inversely proportional to the distance ($r$) from the conductor, expressed as $B \propto \frac{I}{r}$ [Per the Biot-Savart Law].
  • Direction: The direction of the field is determined by the Right-Hand Thumb Rule: If the conductor is held in the right hand such that the thumb points in the direction of the current, the curled fingers indicate the direction of the magnetic field lines.

Visual Representation: Magnetic Field Pattern

Current (I) Concentric circles around the wire

Analytical Breakdown of Field Characteristics

Attribute Physical Description
Geometry Magnetic field lines are concentric circles centered on the axis of the wire.
Dependence on Distance The density of lines decreases as the radial distance ($r$) increases, indicating a weaker field further from the wire.
Relationship to Current Increasing current density $I$ increases the magnetic flux density $B$ at any given point.

Conclusion on Field Topology

Based on the electromagnetic principles defined, the correct description of the magnetic field near a long straight wire is that the field consists of concentric circles centered on the wire. As the distance from the wire increases, the circles become larger and the magnetic field strength decreases proportionally ($B \propto 1/r$).

Final Solution: The magnetic field lines are concentric circles centered on the wire, with the direction determined by the Right-Hand Thumb Rule.

Solution:

Initial Theoretical Foundation

The magnetic field produced by a current-carrying circular coil is governed by the Biot-Savart Law, which states that the magnetic field ($dB$) at a point due to a current element ($Idl$) is proportional to the current and the sine of the angle between the element and the displacement vector, and inversely proportional to the square of the distance from the element.

Step 1: Analysis of Magnetic Field Configuration

As current flows through a circular loop, the magnetic field lines form concentric circles around each point of the wire [Per the Right-Hand Thumb Rule]. As we move towards the center of the circular coil, these concentric circles expand in diameter and their curvature decreases significantly.

Step 2: Geometric Limit at the Center

At the exact center of the coil, the contributions from different parts of the coil sum up vectorially. Because the segments of the coil are symmetric with respect to the center, the components of the magnetic field that are perpendicular to the axis of the coil cancel each other out. The remaining components, which are parallel to the axis of the coil, add up. Consequently, within a small region around the center, the field lines appear as parallel straight lines.

Step 3: Visual Representation

B-field Circular Coil

Step 4: Conclusion

The statement is True. Due to the superposition of magnetic fields produced by each infinitesimal segment of the current-carrying circular conductor, the field at the center is uniform and directed along the axis of the coil, manifesting as straight parallel lines in that localized region [By Principle of Superposition of Magnetic Fields].

Final Solution: The statement is True.

3.

Solution:

Step 1: Theoretical Foundation of Short Circuiting

A short circuit occurs when the live wire and the neutral wire come into direct contact due to damaged insulation or a fault in an electrical appliance [Per Ohm’s Law: $I = V/R$]. In a typical domestic circuit, the resistance ($R$) of the circuit is intentionally kept at a specific value to allow a controlled flow of current. When a short circuit happens, the resistance of the path between the live and neutral wires drops to nearly zero ($R \to 0$).

Step 2: Mathematical Analysis of Current Surge

According to Ohm’s Law, the current $I$ is inversely proportional to the resistance $R$ for a constant potential difference $V$ ($220V$ in India):

$I = \frac{V}{R}$

As the resistance $R$ approaches an infinitesimally small value (approaching zero), the current $I$ increases disproportionately to a very high value ($I \to \infty$). This extreme increase in current is known as a surge.

Step 3: Physical Consequences

  • Joule’s Law of Heating: The heat produced in a conductor is given by $H = I^2Rt$. Since $I$ increases dramatically, the heat generated ($H$) increases by the square of the current, leading to potential fires or melting of wire insulation.
  • Electromagnetic Induction: The intense current creates a high-intensity magnetic field around the conductor, which can exert mechanical stress on circuit components.

Step 4: Visual Representation of Circuit State Change

Load (R) Normal: Low I Short Path (R≈0) Result: I surges

Step 5: Comparative Data

Parameter Normal Condition Short Circuit Condition
Resistance ($R$) Finite/High Negligible ($\to 0$)
Current ($I$) Nominal Value Extremely High Surge

Final Solution: At the time of a short circuit, the current in the circuit increases heavily/drastically.

Solution:

Step 1: Analyzing the Standard Color Coding System

In domestic electrical circuits, international and national standards (such as the Indian Standard IS 375:1963) mandate specific color codes for insulation to ensure safety and prevent electrical hazards during installation and maintenance. The standard three-wire system consists of:

  • Live Wire (Phase): Traditionally red (in the old convention) or brown (in the new IEC convention).
  • Neutral Wire: Traditionally black (old) or blue (new).
  • Earth Wire: Green or Yellow-Green.

Step 2: Evaluating the Statement

The statement asserts that "A wire with a green insulation is usually the live wire of an electric supply."

Based on the established safety protocols [Per the Indian Standard for Electrical Wiring], the green wire is designated exclusively for the Earth connection. The Earth wire is connected to a metal plate deep in the earth near the house to provide a low-resistance path for leakage current, thereby protecting the user from electric shock [Per the Principle of Electrical Earthing].

Step 3: Comparative Analysis of Wire Functions

Wire Type Color (Old Convention) Color (New Convention) Function
Live Red Brown Carries high potential current
Neutral Black Blue Completes the circuit
Earth Green Green/Yellow Safety grounding

Step 4: Conclusion

Since green insulation is strictly reserved for the earth wire to prevent confusion and accidental grounding of live circuits, the statement is logically and factually incorrect.

Green Wire = Earth Wire Not Live Wire

Final Solution: False. A wire with green insulation is the earth wire, not the live wire.

Solution:

Theoretical Foundation: Fleming's Left-Hand Rule

When a current-carrying conductor is placed within an external magnetic field, it experiences a mechanical force, provided the current direction is not parallel to the magnetic field lines. The direction of this force is determined by Fleming's Left-Hand Rule. [Per the Lorentz Force Principle, $\vec{F} = I(\vec{L} \times \vec{B})$].

Step 1: Anatomical Orientation of the Hand

To determine the direction of the force, align the thumb, forefinger, and middle finger of the left hand such that they are mutually perpendicular to one another [Per the Cartesian coordinate system orientation].

Step 2: Alignment of Vectors

  • The Forefinger: Point this in the direction of the external Magnetic Field ($B$).
  • The Middle Finger: Point this in the direction of the Electric Current ($I$) flowing through the conductor.
  • The Thumb: The direction in which the thumb points indicates the direction of the Force ($F$) experienced by the conductor.

Visual Representation of Fleming's Left-Hand Rule

Force (F) Field (B) Current (I)

Analytical Summary of Force Direction

Finger/Digit Vector Quantity
Forefinger Magnetic Field Direction ($B$)
Middle Finger Direction of Current ($I$)
Thumb Resultant Force Direction ($F$)

The magnitude of this force is given by the expression $F = BIl \sin(\theta)$, where $\theta$ is the angle between the current and the magnetic field. Since the problem specifies the conductor is perpendicular to the magnetic field, $\theta = 90^\circ$, resulting in a maximum force $F_{max} = BIl$ [Per the properties of the cross product in vector calculus].

Final Solution: The rule used is Fleming’s Left-Hand Rule, where the thumb indicates the direction of the force when the forefinger points along the magnetic field and the middle finger points along the direction of the current.

Solution:

1. Definition of Short Circuit

An electric short circuit occurs when a path of very low electrical resistance is created between two points in an electrical circuit that are meant to be at different potentials, specifically between the live wire and the neutral wire. [Per Ohm's Law: $I = \frac{V}{R}$].

2. The Physical Mechanism

In a standard household circuit, the current ($I$) is determined by the resistance ($R$) of the connected appliances. When a short circuit occurs, the resistance of the path drops toward zero. Consequently, the current flowing through the circuit rises to an extremely high value. This phenomenon is known as excessive current draw.

3. Common Causes

  • Damaged Insulation: The insulating cover (usually PVC) of the live and neutral wires becomes worn out or melts, allowing the two wires to come into direct physical contact.
  • Faulty Appliances: An internal defect within an electrical device can bypass the load, creating a low-resistance path between the power supply lines.
  • External Connection: Accidental contact of live and neutral wires during maintenance or due to structural damage to the wiring system.

4. Visual Representation of Circuit Integrity

Live Neutral Appliance Short Circuit Path

5. Consequences of Short Circuit

The Joule Heating effect [Defined by $H = I^2Rt$] dictates that heat production is proportional to the square of the current. Because $I$ becomes dangerously high during a short circuit:

  1. Thermal Overload: Rapid generation of heat can cause the insulation of surrounding wires to catch fire.
  2. Equipment Damage: The sudden surge of current can instantly destroy sensitive electronic components within the circuit.
  3. Circuit Interruption: Protective devices such as fuses or Miniature Circuit Breakers (MCBs) operate by tripping or melting to break the circuit and prevent further damage.

Final Solution: An electric short circuit occurs when the live wire and the neutral wire come into direct contact with each other, resulting in a path of negligible resistance that causes a sudden, dangerous surge of electric current.

Solution:

Method 1: Magnetic Field Produced by a Permanent Magnet

A static magnetic field can be produced by a permanent magnet, such as a bar magnet or a horseshoe magnet. In this configuration, the magnetic field is intrinsic to the ferromagnetic material, which possesses aligned magnetic domains [Per the Domain Theory of Ferromagnetism]. The field lines originate from the North pole and terminate at the South pole outside the magnet.

N S Fig 1: Field lines of a Bar Magnet

Method 2: Magnetic Field Produced by an Electric Current (Electromagnetism)

According to Oersted’s Experiment, an electric current flowing through a conductor creates a magnetic field around it. This is the fundamental principle of electromagnetism [Per Ampere’s Circuital Law]. The strength and direction of this field are dependent on the magnitude of the current ($I$) and the geometry of the conductor.

  • Straight Conductor: The magnetic field lines are concentric circles centered on the wire. The direction is determined by the Right-Hand Thumb Rule [By the Maxwell Right-Hand Grip Rule].
  • Solenoid: A coil of many circular turns of insulated copper wire wrapped closely in the shape of a cylinder acts as an electromagnet when current passes through it. The field inside the solenoid is uniform and strong, resembling the field of a bar magnet.
I Fig 2: Concentric magnetic field lines around a current-carrying wire

Final Solution: The two primary methods for producing magnetic fields are (1) utilizing the intrinsic magnetic properties of permanent magnets and (2) generating magnetic fields through the flow of electric current in a conductor, such as in a straight wire or a solenoid.

Solution:

Theoretical Foundation: The Lorentz Force Law

The magnitude of the magnetic force ($F$) exerted on a current-carrying conductor of length ($l$), carrying a current ($I$), and placed in a uniform magnetic field ($B$) is defined by the vector cross-product relationship:

$F = B \cdot I \cdot l \cdot \sin(\theta)$

Where:

  • $F$ is the magnitude of the magnetic force (Newtons, $N$).
  • $B$ is the magnetic flux density (Tesla, $T$).
  • $I$ is the electric current (Amperes, $A$).
  • $l$ is the length of the conductor within the magnetic field ($m$).
  • $\theta$ is the angle between the direction of the current flow and the direction of the magnetic field.

Step 1: Analyzing the Angular Dependency

To determine when the force $F$ is at its maximum, we examine the behavior of the trigonometric function $\sin(\theta)$ within the range of $0^\circ \leq \theta \leq 180^\circ$.

  • If $\theta = 0^\circ$ or $180^\circ$ (conductor is parallel to the field), $\sin(\theta) = 0$, leading to $F = 0$.
  • If $\theta = 90^\circ$ (conductor is perpendicular to the field), $\sin(90^\circ) = 1$, which is the absolute maximum value for the sine function [Per trigonometric identity constraints].

Step 2: Geometric Representation

B I 90°

Step 3: Logical Conclusion

Since the magnitude of the force is directly proportional to the sine of the angle between the conductor and the magnetic field, and the maximum value of $\sin(\theta)$ is $1$, the force experienced by the conductor is maximized when $\theta = 90^\circ$.

Physical Interpretation: When the conductor is placed perpendicular to the direction of the magnetic field, the maximum number of field lines intersect the conductor per unit length, resulting in the highest magnetic force interaction [By the Principle of Lorentz Force].

Final Solution: The force experienced by a current-carrying conductor placed in a magnetic field is largest when the conductor is placed perpendicular (at an angle of $90^\circ$) to the direction of the magnetic field.

Solution:

Theoretical Foundation: Fleming's Right-Hand Rule

To determine the direction of induced current in a conductor moving through a magnetic field (such as a coil rotating in a generator), we apply Fleming's Right-Hand Rule. This rule establishes the relationship between the motion of the conductor, the direction of the magnetic field, and the resulting induced current.

Step 1: Definition of the Rule

Stretch the thumb, forefinger, and middle finger of your right hand such that they are mutually perpendicular to each other [By the definition of orthogonal coordinate systems].

  • The Thumb: Indicates the direction of the motion of the conductor relative to the magnetic field.
  • The Forefinger: Indicates the direction of the magnetic field (from North to South).
  • The Middle Finger: Indicates the direction of the induced current in the conductor.

Step 2: Visual Representation

B (Magnetic Field) Motion Induced Current

Step 3: Analytical Justification

The induction of current is governed by Faraday’s Law of Electromagnetic Induction, which states that a changing magnetic flux linked with a coil induces an electromotive force (EMF) [Per Faraday's Law: $\varepsilon = -\frac{d\Phi_B}{dt}$].

When a coil rotates within a magnetic field, the angle $\theta$ between the area vector of the coil and the magnetic field vector $\vec{B}$ changes continuously over time, resulting in a time-varying magnetic flux: $$\Phi_B = B \cdot A \cdot \cos(\omega t)$$ Where:

$B$ Magnetic field strength
$A$ Area of the coil
$\omega$ Angular velocity of rotation

The change in flux induces an EMF, and consequently, a current flows. Fleming’s Right-Hand Rule is the practical application of the Lenz's Law and the Lorentz Force acting on the free electrons within the conductive wire.

Final Solution: The rule used to determine the direction of current induced in a coil rotating in a magnetic field is Fleming's Right-Hand Rule. By aligning the right thumb with the motion of the conductor and the forefinger with the direction of the magnetic field, the middle finger points in the direction of the induced current.

Solution:

Step 1: Analyzing the Direction of Current ($I$)

By convention, the direction of an electric current is defined as the direction of the flow of positive charge [Per conventional current theory]. Since the electron beam consists of negatively charged particles (electrons) moving from the back wall toward the front wall, the conventional current ($I$) is directed opposite to the movement of the electrons.

  • Direction of electron movement: Back wall to front wall.
  • Direction of conventional current ($I$): Front wall to back wall.

Step 2: Applying Fleming’s Left-Hand Rule

To determine the direction of the magnetic field ($B$), we utilize Fleming’s Left-Hand Rule, which dictates the relationship between current, magnetic field, and force [Per Fleming’s Left-Hand Rule].

The configuration is as follows:

  • Thumb (Force, $F$): Points to the Right side (as the electron beam is deflected to the right).
  • Index Finger (Magnetic Field, $B$): The unknown direction we seek.
  • Middle Finger (Current, $I$): Points toward the Back wall (calculated in Step 1).

Step 3: Visual Representation

Force (F) - Right Current (I) - Back Field (B) - Downward

Step 4: Vector Determination

If we align our left hand such that the thumb points to the right and the middle finger (representing current) points toward the back wall, the index finger must point in a specific spatial direction.

  • If the observer is facing the front wall:
  • Right is the $+x$ direction.
  • Back is the $+y$ direction.
  • Per the right-hand rule/cross product vector relationship $\vec{F} = q(\vec{v} \times \vec{B})$, the vector cross product requires the magnetic field to be oriented vertically downwards.

Step 5: Theoretical Justification

According to the Lorentz Force law, $\vec{F} = q(\vec{v} \times \vec{B})$, where $\vec{v}$ is the velocity vector of the charge $q$. Since $q$ is negative, the direction of force is reversed relative to the direction of the cross product of velocity and magnetic field [Per the Lorentz Force Law]. A downward magnetic field interacting with a backward-moving current (equivalent to a forward-moving negative charge) generates a force to the right.

Final Solution: The direction of the magnetic field is vertically downwards.

Solution:

Theoretical Foundation: The Right-Hand Thumb Rule

To determine the direction of the magnetic field produced by a straight current-carrying conductor, we utilize the Right-Hand Thumb Rule (also known as Maxwell’s Corkscrew Rule). [Per the Biot-Savart Law and Ampere's Circuital Law, the magnetic field $\vec{B}$ forms concentric circular loops around a linear wire, with the direction defined by the cross product of the current vector and the position vector].

Step 1: Orienting the Conductor

Imagine grasping the straight current-carrying conductor with your right hand such that the thumb points in the direction of the conventional current ($I$).

Step 2: Determining Field Direction

The direction in which the fingers encircle the wire corresponds to the direction of the magnetic field lines ($\vec{B}$). [By the Right-Hand Grip Rule, if current flows upward, the magnetic field is directed counter-clockwise when viewed from above].

I Field (B)

Analytical Summary of Variables

Variable Physical Representation
$I$ (Right Thumb) Direction of Conventional Electric Current
Fingers ($B$) Direction of Magnetic Field Lines

Final Solution: The rule is the Right-Hand Thumb Rule, which states that if you hold a current-carrying straight conductor in your right hand such that your thumb points in the direction of the current, then the direction of your curled fingers gives the direction of the magnetic field lines around the conductor.

Solution:

Step 1: Definition and Primary Function of the Earth Wire

The earth wire is a safety conductor, typically colored green or yellow-green, which provides a low-resistance path for electric current to flow directly into the ground [Per safety protocol in domestic electrical installations].

  • Function 1: Leakage Mitigation: If the insulation of a live wire is damaged and it comes in contact with the metallic casing of an appliance, the earth wire intercepts the current.
  • Function 2: Grounding: By providing a path of zero potential (the Earth), the earth wire ensures that the charge is dissipated harmlessly, preventing the appliance casing from becoming "live" at a high potential.

Step 2: Necessity of Earthing Metallic Appliances

Earthing is mandatory for appliances with metallic bodies (e.g., electric irons, refrigerators, toasters) for the following reasons:

  1. Prevention of Electric Shock: If a fault occurs where the live wire touches the metal body, the person touching the appliance would otherwise become the path of least resistance to the ground, resulting in a severe or fatal electric shock. Earthing bypasses this human-involved circuit. [Based on Ohm's Law $V = IR$; the low resistance of the earth wire forces a high current through it, triggering protective devices].
  2. Circuit Interruption: When the live wire touches the earthed metal casing, it causes a short circuit, leading to an extremely high current draw. This high current trips the fuse or the Miniature Circuit Breaker (MCB), immediately isolating the appliance from the power source.

Step 3: Visualizing the Earthing Mechanism

Metallic Appliance Live Wire Earth Wire

Step 4: Theoretical Summary

The necessity of earthing relies on the principle of Equipotentiality. By connecting the appliance body to the Earth, we ensure that the potential of the metal surface remains $0V$, equal to the Earth's potential. This eliminates the potential difference ($\Delta V$) between the appliance and the ground, thereby preventing the flow of current through a user touching the appliance.

Final Solution: The earth wire functions as a safety mechanism that provides a low-resistance path to the ground for fault currents. It is necessary to earth metallic appliances to prevent the metal casing from reaching high potential, thereby protecting users from electric shocks and ensuring that protective devices (fuses/MCBs) trip during insulation failure.

This website uses cookies

We use cookies to improve user experience. Choose what cookies you allow us to use. You can read more about our Cookie Policy in our Privacy Policy

Accept All
Decline All