Your Worksheet is Ready
CBSE - Class 9 Science Sound Worksheet
Exercises
Worksheet Answers
Solution:
A sound wave is categorized as a longitudinal wave because the displacement of the medium's particles is parallel to the direction of energy propagation. [Per the definition of mechanical wave mechanics].
When an object vibrates, it exerts force on adjacent air molecules. These molecules undergo periodic oscillation about their mean positions. In a longitudinal wave:
The following visual representation demonstrates the alignment of particle displacement vector $\vec{d}$ and wave velocity vector $\vec{v}$.
Mathematically, if the wave propagates along the $x$-axis, the displacement $s(x, t)$ of the particles is expressed as:
$s(x, t) = A \sin(\omega t - kx)$
Where:
[By the Principle of Superposition for Mechanical Waves], since the displacement vector $\vec{s}$ and the propagation vector $\vec{k}$ are both directed along the $x$-axis, the angle $\theta$ between them is $0^\circ$ or $180^\circ$. By definition, any wave where the medium displacement is collinear with the direction of energy transfer is a longitudinal wave.
Final Solution: Sound waves are classified as longitudinal because the mechanical oscillations of the medium particles occur in the same direction as the propagation of the wave, creating sequential compressions and rarefactions along the axis of travel.
Solution:
In the absence of a sound source, air molecules are distributed uniformly throughout the medium. When a sound-producing object, such as a vibrating tuning fork or a diaphragm, is at rest, the pressure in the surrounding air is constant, representing the atmospheric pressure level.
When a vibrating object moves forward (the "outward" stroke), it exerts a force on the air particles immediately in front of it. This action pushes these particles closer together, creating a region of high density and high pressure, known as a compression. [Per the definition of longitudinal wave propagation in a material medium].
When the vibrating object moves backward (the "inward" stroke), it creates a region of low pressure and low density as the air particles are pulled apart. This region of decreased density is termed a rarefaction. [Per the principle of particle displacement in a mechanical wave].
The continuous back-and-forth motion of the source creates a series of alternating compressions and rarefactions. These disturbances are transmitted through the medium as particles collide with neighboring particles and transfer energy, rather than the particles themselves moving from the source to the observer. [Per the Kinetic Theory of Gases and Wave Mechanics].
| Property | Compression | Rarefaction |
|---|---|---|
| Pressure | Higher than average | Lower than average |
| Density | Maximum | Minimum |
| Particle Motion | Displaced towards forward | Displaced towards backward |
Final Solution: Compressions and rarefactions are produced as longitudinal pulses caused by the periodic oscillation of a source, which creates alternating zones of high density (compressions) and low density (rarefactions) that propagate through the medium.
Solution:
Sound is a form of mechanical energy that creates the sensation of hearing in our ears. It propagates through a material medium (solid, liquid, or gas) as a longitudinal wave, consisting of a series of compressions (regions of high pressure/density) and rarefactions (regions of low pressure/density). [Per the Wave Theory of Sound]
Sound is generated by the physical vibration of an object. Vibration is defined as the rapid back-and-forth motion of an object about its mean position. When an object vibrates, it displaces the adjacent particles of the surrounding medium, creating a pressure disturbance that travels outward from the source.
| Process Phase | Physical State | Pressure Characteristic |
|---|---|---|
| Compression | High molecular density | Maximum pressure |
| Rarefaction | Low molecular density | Minimum pressure |
Final Solution: Sound is a mechanical wave produced by the vibrations of an object, which travels through a medium by creating a series of compressions and rarefactions.
Solution:
The frequency ($f$) of a sound source is defined as the number of oscillations or vibrations produced per unit of time (typically one second). The mathematical relationship is expressed as:
$f = \frac{n}{t}$
Where:
Rearranging the formula to solve for the number of vibrations ($n$):
$n = f \times t$
Substituting the identified values into the equation:
$n = 100 \text{ cycles/second} \times 60 \text{ seconds}$
$n = 6000 \text{ cycles}$
Since the source completes $100$ cycles in $1$ second, the total number of vibrations in $60$ seconds is the product of the rate of oscillation and the total duration. [By the Principle of Unitary Method]
Final Solution: The source vibrates 6,000 times in one minute.
Solution:
To determine the ratio of the time taken for sound to travel through two different media, we utilize the fundamental relationship between distance ($d$), speed ($v$), and time ($t$):
$t = \frac{d}{v}$ [By the definition of speed in kinematics]
Let $L$ be the length of the aluminium rod. Since the children are at opposite ends, the sound travels distance $L$ through the aluminium and distance $L$ through the air.
Let $t_{air}$ be the time taken to travel through air and $t_{Al}$ be the time taken to travel through the aluminium rod.
For the air: $t_{air} = \frac{L}{v_{air}}$ [Per the relationship $t = d/v$]
For the aluminium: $t_{Al} = \frac{L}{v_{Al}}$ [Per the relationship $t = d/v$]
We seek the ratio $\frac{t_{air}}{t_{Al}}$:
$\frac{t_{air}}{t_{Al}} = \frac{L / v_{air}}{L / v_{Al}}$
By algebraic simplification, we cancel $L$ from the numerator and denominator:
$\frac{t_{air}}{t_{Al}} = \frac{v_{Al}}{v_{air}}$
Substituting the standard values for the speed of sound:
$\frac{t_{air}}{t_{Al}} = \frac{6420 \text{ m/s}}{344 \text{ m/s}}$
Performing the division:
$\frac{t_{air}}{t_{Al}} \approx 18.66$
| Medium | Speed ($v$) | Time ($t$) |
|---|---|---|
| Aluminium | $6420 \text{ m/s}$ | $L / 6420$ |
| Air | $344 \text{ m/s}$ | $L / 344$ |
The calculation demonstrates that sound travels significantly faster in denser, elastic media like solids compared to gases due to the higher molecular density and atomic bonding strength [Per the property $v = \sqrt{\frac{E}{\rho}}$ where $E$ is modulus of elasticity and $\rho$ is density].
Final Solution: The ratio of the time taken by the sound wave in air to the time taken in aluminium is approximately 18.66 : 1.
Solution:
The detection of internal defects in metal blocks relies on the principle of ultrasonic reflection. Sound waves with frequencies greater than $20,000 \text{ Hz}$ (ultrasound) are used because they possess short wavelengths, allowing them to travel through solid media with minimal diffraction, thereby enabling high resolution [Per the wave properties of high-frequency sound].
To detect a defect, an ultrasonic transmitter (transducer) is placed on one surface of the metal block. A coupling medium, such as oil or grease, is applied between the transducer and the metal surface to eliminate air gaps, which would otherwise reflect the sound waves due to impedance mismatch [Per the principle of Acoustic Impedance Matching].
The detection process follows these logical steps:
By measuring the time $t$ taken for the pulse to travel from the transmitter to the defect and back, the depth $d$ of the defect can be calculated using the following formula:
$$d = \frac{v \times t}{2}$$
Where:
| $d$ | = depth of the flaw from the surface |
| $v$ | = velocity of sound in the specific metal |
| $t$ | = total time elapsed between the transmission and the receipt of the reflected echo |
The factor of $2$ is included because the pulse travels the distance to the defect and back to the surface [Per the law of wave reflection].
Final Solution: Defects in a metal block are identified when ultrasonic waves reflect prematurely due to an interface with a flaw (like a crack or void), resulting in an echo signal on an oscilloscope that indicates the precise location and size of the defect based on the time-of-flight calculation.
Solution:
To determine the wavelengths of sound corresponding to specific frequencies, we utilize the fundamental wave equation [Per the Wave Velocity-Frequency-Wavelength Relationship]:
$v = f \cdot \lambda$
Where:
Rearranging the formula to solve for wavelength ($\lambda$):
$\lambda = \frac{v}{f}$
Substitute the given values into the derived formula [By algebraic substitution]:
$\lambda_1 = \frac{344 \text{ m s}^{-1}}{20 \text{ Hz}}$
$\lambda_1 = 17.2 \text{ m}$
First, convert the frequency unit from kilohertz to hertz [By Metric Prefix Conversion]:
$20 \text{ kHz} = 20 \times 10^3 \text{ Hz} = 20,000 \text{ Hz}$
Substitute into the formula:
$\lambda_2 = \frac{344 \text{ m s}^{-1}}{20,000 \text{ Hz}}$
$\lambda_2 = 0.0172 \text{ m}$
| Frequency ($f$) | Velocity ($v$) | Wavelength ($\lambda$) |
|---|---|---|
| $20 \text{ Hz}$ | $344 \text{ m s}^{-1}$ | $17.2 \text{ m}$ |
| $20,000 \text{ Hz}$ | $344 \text{ m s}^{-1}$ | $0.0172 \text{ m}$ |
Final Solution: The wavelengths corresponding to the hearing range are $17.2 \text{ m}$ for $20 \text{ Hz}$ and $0.0172 \text{ m}$ (or $1.72 \text{ cm}$) for $20 \text{ kHz}$.
Solution:
To analyze this phenomenon, we must define the velocities of the two types of waves involved in the event of a lightning strike:
The time taken ($t$) for any wave to travel a specific distance ($d$) is given by the relation:
$t = \frac{d}{v}$ [Derived from the fundamental definition of velocity]
Since the distance ($d$) from the source of the lightning to the observer is the same for both light and sound, we can set up the ratio of time taken:
$t_{light} = \frac{d}{c}$
$t_{sound} = \frac{d}{v}$
Given that $c \gg v$, specifically $3 \times 10^8 \text{ m/s} \gg 343 \text{ m/s}$, the ratio of time taken is:
$\frac{t_{sound}}{t_{light}} = \frac{d/v}{d/c} = \frac{c}{v}$
Substituting the values: $\frac{300,000,000}{343} \approx 874,635$
This implies that light reaches the observer almost instantaneously, whereas sound travels at a significantly lower velocity, resulting in a perceptible time delay.
The discrepancy in observation time arises because light propagates through the atmosphere as an electromagnetic wave requiring no medium, traveling at a velocity nearly a million times faster than the mechanical longitudinal wave of sound. Consequently, $t_{light} \to 0$ in practical human observation scales, while $t_{sound}$ accumulates a measurable lag based on the distance $d$.
Final Solution: The thunder is heard after the flash because light travels significantly faster ($3 \times 10^8 \text{ m/s}$) than sound ($343 \text{ m/s}$), causing the visual information to reach the observer effectively instantaneously, while the auditory information is delayed by the slower speed of sound waves traveling through the air.
Solution:
Ultrasonic cleaning is an industrial and precision-based cleaning technique that utilizes high-frequency sound waves (ultrasound) to remove contaminants from surfaces. The fundamental physical process governing this is cavitation, occurring in a liquid medium such as water or a specialized solvent [Per the physics of acoustics and fluid dynamics].
The cleaning process proceeds through the following sequential stages:
These localized energy bursts strike the surface of the object submerged in the tank. The mechanical energy is sufficient to dislodge particles—such as dust, grease, oil, soot, or biological contaminants—that are adhered to the surface through surface tension or Van der Waals forces. Because these bubbles are microscopic, they can penetrate deep into crevices, blind holes, and complex geometries that manual scrubbing cannot reach.
| Industry | Specific Use Case |
|---|---|
| Medical | Sterilization of complex surgical instruments. |
| Electronics | Cleaning of micro-circuitry and delicate components. |
| Manufacturing | Removal of machine oils from precision mechanical parts. |
Final Solution: Ultrasound is used for cleaning by transmitting high-frequency sound waves through a liquid solvent, causing the formation and rapid collapse of microscopic bubbles (cavitation). This process generates intense, localized shockwaves that dislodge and remove dirt, grease, and impurities from hard-to-reach areas of an object without causing mechanical damage to the surface.
Solution:
Loudness is the physiological perception of the intensity of sound by the human auditory system. It is a subjective measure that describes how "strong" or "intense" a sound is perceived to be by a listener. While intensity is a physical quantity measured in Watts per square meter ($W/m^2$), loudness is the interpretation of that physical intensity by the brain [Per Psychoacoustic Principles].
The loudness of sound primarily depends on the following physical parameters:
| Factor | Relationship to Loudness | Physical Basis |
|---|---|---|
| Amplitude ($A$) | $L \propto A^2$ | Energy content of the wave |
| Distance ($r$) | $L \propto \frac{1}{r^2}$ | Inverse Square Law of dispersion |
| Density of Medium | Directly proportional | Efficiency of energy transfer |
Final Solution: Loudness is the degree of sensation produced by sound, determined predominantly by the amplitude of the vibration and the distance of the observer from the sound source. Quantitatively, it is related to the square of the amplitude of the sound wave.
Solution:
Yes, sound follows the same fundamental laws of reflection as light, despite the fact that light is an electromagnetic wave and sound is a longitudinal mechanical wave. The reflection of sound occurs when sound waves strike a hard, smooth surface (an obstacle) and return to the medium from which they originated.
The reflection of any wave motion (sound or light) is governed by two immutable geometric laws:
While light requires no medium and sound requires a material medium (air, water, etc.), both obey the Huygens-Fresnel Principle, which dictates that every point on a wavefront acts as a source of secondary wavelets. When these wavelets encounter a barrier larger than the wavelength of the sound, they are reflected according to the geometric laws mentioned above.
For sound to obey these laws effectively, the following conditions must be satisfied [Per the Physical Requirements of Wave Reflection]:
| Condition | Description |
|---|---|
| Surface Texture | The surface must be hard and rigid (e.g., walls, metal sheets) to prevent excessive absorption. |
| Wavelength/Obstacle Ratio | The reflecting surface must be large compared to the wavelength of the sound wave. |
To demonstrate this, place two hollow pipes on a table at an angle to a vertical plane (a hard board). If a watch (sound source) is placed at the end of the first pipe and the angle of the pipe is adjusted, a listener at the end of the second pipe will hear the ticking loudest only when $ \angle i = \angle r $. This empirical observation confirms the adherence to the Laws of Reflection [By experimental verification of the Law of Reflection].
Final Solution: Yes, sound obeys the same laws of reflection as light, namely: (1) The angle of incidence equals the angle of reflection ($ \angle i = \angle r $), and (2) the incident wave, the reflected wave, and the normal at the point of incidence reside in the same plane.
Solution:
Reverberation is a physical acoustic phenomenon defined as the persistence of sound in a particular space after the original source of the sound has stopped. It occurs due to the continuous multiple reflections of sound waves from the walls, ceiling, and floor of an enclosure [Per the Law of Reflection of Sound].
When sound waves strike hard surfaces, they undergo reflection. If the enclosure is large and the surfaces are highly reflective, these reflected waves reach the listener in rapid succession, causing the sound to "blur" or "linger," which significantly reduces the clarity and intelligibility of speech or music.
To reduce reverberation and achieve optimal acoustic conditions (such as in auditoriums, concert halls, or recording studios), the surfaces must be treated to absorb sound energy rather than reflect it. This is based on the principle of Acoustic Absorption [Per the Absorption Coefficient Principle].
| Method | Mechanism |
|---|---|
| Sound-Absorbent Materials | Covering walls and ceilings with materials like compressed fireboard, fiberboard, or felt to absorb sound energy instead of reflecting it. |
| Soft Furnishings | Utilizing curtains, carpets, and upholstered seats to trap sound waves and increase the overall absorption coefficient of the room. |
| Acoustic Panels | Installing perforated panels that allow sound to enter cavities where energy is dissipated as heat [By the Law of Conservation of Energy]. |
The reduction of reverberation is achieved by controlling the reverberation time—the time taken for the intensity of the sound to drop by $60 \text{ dB}$ after the source is silenced. By increasing the total surface absorption ($A$), we reduce the reverberation time ($RT_{60}$) as expressed by the Sabine formula:
$RT_{60} = \frac{0.161 \times V}{A}$
Where:
Final Solution: Reverberation is the persistence of sound due to multiple reflections in an enclosure. It is reduced by installing sound-absorbent materials such as curtains, carpets, acoustic tiles, and fiberboard to increase the sound absorption coefficient of the interior surfaces.
Solution:
An echo is the repetition of sound caused by the reflection of sound waves from a distant obstacle. For an echo to be distinctly audible, the time interval between the original sound and the reflected sound must be at least $0.1\text{ s}$ [Per the Law of Persistence of Hearing].
The total distance $D$ traveled by the sound wave is $D = v \times t$, where $v$ is the speed of sound and $t$ is the time taken. Since the sound travels to the obstacle and back, the distance to the obstacle $d$ is given by:
$d = \frac{v \times t}{2}$
The speed of sound in a gas is governed by the Laplace correction to the Newton-Laplace formula:
$v = \sqrt{\frac{\gamma RT}{M}}$
Where:
[Justification: Per the kinetic theory of gases, as temperature ($T$) increases, the average kinetic energy of gas molecules increases, resulting in a higher velocity of sound propagation.]
Since the speed of sound $v$ is directly proportional to the square root of the absolute temperature ($\sqrt{T}$), the speed of sound is higher on a hotter day than on a colder day.
| Condition | Temperature ($T$) | Speed of Sound ($v$) | Echo Perception |
|---|---|---|---|
| Normal/Cool Day | Lower | Lower | Possible (If distance $\ge$ minimum) |
| Hotter Day | Higher | Higher | Possible (More distinct) |
On a hotter day, the speed of sound increases. Because the speed of sound is greater, the sound wave covers the distance to the reflecting surface and back in a shorter time period compared to a colder day. However, since the distance between the source and the reflecting surface remains constant, the echo will indeed be heard, and it may be perceived as slightly sharper or more rapid due to the increased velocity of the acoustic waves.
Final Solution: Yes, an echo is heard on a hotter day. In fact, because the speed of sound increases with an increase in temperature, the echo reaches the observer in a shorter time interval compared to a cooler day, provided the distance to the reflecting surface remains constant.
Solution:
To determine the frequency of the sound wave, we identify the following physical parameters provided in the problem statement:
[Per the standard SI unit system, all calculations must be performed in meters. Conversion is required.]
$\lambda = 1.5 \text{ cm} = 1.5 \times 10^{-2} \text{ m} = 0.015 \text{ m}$
The relationship between the speed of a wave, its wavelength, and its frequency is defined by the fundamental wave equation: [Per the Wave Equation Principle]
$v = \nu \times \lambda$
Where:
Rearranging the equation to solve for frequency ($\nu$):
$\nu = \frac{v}{\lambda}$
$\nu = \frac{339 \text{ m s}^{-1}}{0.015 \text{ m}}$
$\nu = 22,600 \text{ Hz}$
To determine if the sound is audible to a human, we compare the calculated frequency against the standard human audible range: [Per the Range of Human Hearing (Sonic Range)]
| Category | Frequency Range |
|---|---|
| Infrasonic | $< 20 \text{ Hz}$ |
| Audible | $20 \text{ Hz} - 20,000 \text{ Hz}$ |
| Ultrasonic | $> 20,000 \text{ Hz}$ |
Since the calculated frequency ($22,600 \text{ Hz}$) exceeds the upper threshold of human hearing ($20,000 \text{ Hz}$), the sound is classified as ultrasonic.
Final Solution: The frequency of the wave is $22,600 \text{ Hz}$ ($22.6 \text{ kHz}$). Since this value is greater than $20,000 \text{ Hz}$, the sound is ultrasonic and will not be audible to the human ear.
Solution:
Reflection of sound waves occurs when sound pulses strike a hard surface and bounce back into the medium from which they originated. This phenomenon obeys the laws of reflection: the angle of incidence equals the angle of reflection, and the incident wave, reflected wave, and the normal to the reflecting surface lie in the same plane [Per the Law of Reflection].
Megaphones, horns, musical instruments (like trumpets and shehnais), and loudspeakers are designed to send sound waves in a particular direction without spreading them in all directions.
The stethoscope is a medical instrument used by practitioners to listen to internal sounds generated within the human body, such as the rhythmic beating of the heart or respiratory sounds in the lungs.
| Application | Primary Objective | Reflection Medium |
|---|---|---|
| Megaphone | Directing sound intensity | Conical metallic/plastic tube |
| Stethoscope | Amplification/Transfer of body sounds | Flexible rubber/hollow tube |
Final Solution: The two primary practical applications of the reflection of sound are the design of megaphones (which restrict sound dispersion through multiple reflections to increase reach) and the construction of stethoscopes (which guide body sounds to the clinician's ear via repeated reflections within a tube, preserving sound energy).
Solution:
The specific characteristic of sound that allows an individual to distinguish between different voices, even when they possess the same pitch and loudness, is known as Timbre or Quality of sound [Per the principles of Psychoacoustics].
Sound waves produced by human vocal cords are complex periodic waves. While pitch is determined by the fundamental frequency and loudness by the amplitude, the timbre is determined by the overtones and harmonics present in the sound [By Fourier’s Theorem, any complex periodic waveform can be decomposed into a series of pure sine waves].
| Characteristic | Definition | Role in Identification |
|---|---|---|
| Pitch | Frequency | Identifies high vs low notes (not individual identity). |
| Loudness | Amplitude | Identifies intensity (not individual identity). |
| Timbre | Waveform Shape | Identifies the source (Unique identity). |
The human brain is trained to recognize the specific harmonic composition associated with familiar voices, a process facilitated by the auditory cortex's ability to analyze the complexity of the incoming waveform [Per the Theory of Auditory Pattern Recognition].
Final Solution: The characteristic of sound that allows one to identify a friend in a dark room is the quality or timbre of the sound, which is determined by the unique combination of harmonics and overtones produced by their specific vocal anatomy.
Solution:
To determine the time taken by the stone to hit the surface of the water, we apply the second equation of motion for a body in free fall: $s = ut + \frac{1}{2}gt^2$.
Substituting the values into the equation:
$500 = (0)t_1 + \frac{1}{2}(10)t_1^2$ [Per the Second Equation of Motion]
$500 = 5t_1^2$
$t_1^2 = \frac{500}{5} = 100$
$t_1 = \sqrt{100} = 10$ s
Once the stone strikes the water, the splash creates a sound wave that travels back to the top of the tower. We use the formula for constant speed: $\text{Time} = \frac{\text{Distance}}{\text{Speed}}$.
$t_2 = \frac{500}{340} = \frac{50}{34} \approx 1.47$ s [Per the definition of average speed]
The total time elapsed from the moment the stone is dropped until the sound is heard is the sum of the time taken for the stone to reach the water and the time taken for the sound to travel back up to the top of the tower.
$T = t_1 + t_2$
$T = 10 + 1.47 = 11.47$ s
Final Solution: The splash is heard at the top of the tower after 11.47 seconds.