## Engineering Diploma Tuition

35,268 Followers

Showing 76 to 100 of 117
Sort By:
S

Saukat 12/03/2016 in  Engineering Diploma Tuition

The periodic time of a particle with simple harmonic motion is __________ proportional to the angular velocity.

0 0 3

Sravan replied | 09/04/2016

inversely

Gaurav replied | 11/04/2016

inversely

You can add upto 6 Images

R

Rajmohan 12/03/2016 in  Engineering Diploma Tuition

Which is the binding material used in mortar?

0 0 3

N

Neel replied | 24/04/2016

Portland cement is the binding material

U

Umar replied | 29/04/2016

The role if binder is to hold all the aggregates together. Binder doesn't provide strength at all. Binder can be:
1Cement
2 Lime
3 combination of the two

You can add upto 6 Images

S

Sample 11/03/2016 in  Engineering Diploma Tuition

Akhilesh replied | 13/04/2016

Force is vector quantity.
F=massÃ—acceleration . Where mass is magnitute and acceleration is direction .
Vector quantity has both magnitude and direction .
Hence Force is a vector quantity.
Force is applied on a particular direction this makes force a vector quantity

Priyanka replied | 14/04/2016

As F=m*a, a product of mass and acceleration. Acceleration is a vector quantity whereas mass is a scalar quantity. Product of scalar and vector quantity is a vector quantity. This shows that force is a vector quantity.

You can add upto 6 Images

T

Thileshwari 11/03/2016 in  Engineering Diploma Tuition

What is Newton's first law of motion?

0 0 3

Deepa Vikram replied | 12/03/2016

Newtons first law of motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.Also known as law of Inertia.

Semalla replied | 02/07/2016

newtons first law of motion mainly describes about inertia i.e, when a body is in motion or rest it continues it condition until an external force acts on it for example when bus moves we suddenly jump backwards

You can add upto 6 Images

S

Sandeep 10/03/2016 in  Engineering Diploma Tuition

The point, through which the whole weight of the body acts, irrespective of its position, is known as

0 0 3

Suman replied | 27/05/2016

Centre of Gravity = the point where all the weight seems to be concentrated.

K

Khan replied | 28/05/2016

Centre of gravity

You can add upto 6 Images

Naga 10/03/2016 in  Engineering Diploma Tuition, Electrical Engineering Diploma(Engineering Diploma Tuition)

How much i charge for diploma student for one month or per hour per subject

Ranganath replied | 29/11/2016

Rs. 400- Rs. 500 /hour.

You can add upto 6 Images

Sandeep 06/03/2016 in  Engineering Diploma Tuition

Rajesh replied | 01/06/2016

perfect gas

Raman replied | 30/06/2016

None of these because for perfect gas internal energy is the function of temperature but enthalpy is function of temperature ,pressure and volume.

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is throttling device?

1 0 3

Baljit replied | 10/03/2016

Throttling is a process in which enthalpy remains constant. it is an irreversible process. examples of throttling devices are:
1. capillary tube 2. partially open valve
3.porous plug 4.flow through orifice.

Er. Gauri Vishal Kirola replied | 12/07/2016

it is the generic name of any device or process that simply dissipates pressure energy by irreversibly converting it into thermsl energy . these devices do not provide any form of useful energy recovery .

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is universal gas constant ?

1 0 3

K

Kakarlamudi replied | 09/03/2016

R IN IDEAL gas equation is called as universal gas constant

Sandeep replied | 10/03/2016

pv= mRt

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is the continuity equation & law of conservation of mass?

Kishor Megaji replied | 09/03/2016

A1V1=A2V2

Mitesh replied | 09/06/2016

A continuity equation in physics is an equation that describes the transport of some quantity. It is particularly simple and particularly powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. Since mass, energy, momentum, electric charge and other natural quantities are conserved under their respective appropriate conditions,...  more»
A continuity equation in physics is an equation that describes the transport of some quantity. It is particularly simple and particularly powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. Since mass, energy, momentum, electric charge and other natural quantities are conserved under their respective appropriate conditions, a variety of physical phenomena may be described using continuity equations. «less

You can add upto 6 Images

K

Kailash 06/03/2016 in  Engineering Diploma Tuition, Computer Engineering Diploma(Engineering Diploma Tuition)

how i can understand a java language

Ranganath replied | 27/06/2016

Kailash,
Good question.
If the file is saved with the extension .java, its java code.
Also, while looking at the code, we can understand.. message /ping me, i can explain.

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

Mitesh replied | 12/06/2016

Momentum can be defined as "mass in motion." All objects have mass; so if an object is moving, then it has momentum - it has its mass in motion. The amount of momentum that an object has is dependent upon two variables: how much stuff is moving and how fast the stuff is moving. Momentum depends upon the variables mass and velocity. In terms of an equation, the momentum of an object...  more»
Momentum can be defined as "mass in motion." All objects have mass; so if an object is moving, then it has momentum - it has its mass in motion. The amount of momentum that an object has is dependent upon two variables: how much stuff is moving and how fast the stuff is moving. Momentum depends upon the variables mass and velocity. In terms of an equation, the momentum of an object is equal to the mass of the object times the velocity of the object.

Momentum = mass â€¢ velocity
In physics, the symbol for the quantity momentum is the lower case p. Thus, the above equation can be rewritten as

p = m â€¢ v
where m is the mass and v is the velocity. The equation illustrates that momentum is directly proportional to an object's mass and directly proportional to the object's velocity. «less

Billa. Nithin replied | 12/06/2016

It is the product of mass and velocity.for ex
Any one of mass object moves with some velocity then applies break,then velocity doesn't directly falls to 0.due to mass effect it causes some motion.I impact of mass is there.

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is the difference between steady and unsteady flow ?

0 0 3

Gopi Chand replied | 10/06/2016

If a flow is such that the properties at every point in the flow do not depend upon time, it is called a steady flow. If the flow is one where the properties do depend on time then it is known as unsteady flow .

Er. Gauri Vishal Kirola replied | 12/07/2016

a steady flow is one in which conditions ( velocity , pressure and cross - section ) may differ from point to point but do not change with time whereas if the conditions changes then it is called unsteady flow ..

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is vortex flow ?

0 0 3

Praveen replied | 12/05/2016

vortex is the region in fluid in which the flow is rotating about a fixed axis.

Er. Gauri Vishal Kirola replied | 12/07/2016

in fluid dynamics , vortex is a region in a fluid in which the flow is rotating around an axis line that may be straight or curve

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is the Bernoulli's equation ? what are its assumptions?

0 0 3

Jothsnapraveena replied | 10/03/2016

It is a equation which gives pressure between any two points in a fluid considering kinetic and potential energies at those points

Sandeep replied | 10/03/2016

when an in compressible and non-viscous liquid flows in streamlined motion from one place to another, then at every point of its path the total energy per unit volume is constant.

assumptions:-
non-viscous
incompressible

You can add upto 6 Images

Sandeep 05/03/2016 in  Engineering Diploma Tuition

what is the difference between a nozzle and a diffusor ?

0 0 3

Praveen replied | 12/05/2016

Nozzle increases the velocity of a fluid while diffuser decreases the velocity of a fluid.

S

Swapna replied | 27/05/2016

Nozzle is a device which increases the velocity of fluid from inlet to outlet. It is having the diversion section for increasing the pressure. While diffuser is the reverse device.

You can add upto 6 Images

Sandeep 06/03/2016 in  Engineering Diploma Tuition

according to James Joule ..

J = ...........?

0 0 4

Sudheer replied | 10/03/2016

assignment operator the value at the right side is stored in left side variable in j

Sandeep replied | 10/03/2016

One joule is defined as the work done when a force of one newton moves something a distance of 3.3ft. (1 meter) in the direction of the force.

You can add upto 6 Images

S

Sandip 01/03/2016 in  Engineering Diploma Tuition

Sunil replied | 05/03/2016

Lots of free online formula sheets available for engineering online.

Sandeep replied | 05/03/2016

Machine design is the core subject of mechanical engineering. Firstly start study about strength of material. part -1 & part -2. there are the basic concepts for machine design. After that u can use mechanical engineering handbook for numerical related problems.
if you need tution & guidelines about these subjects you can contact me.

You can add upto 6 Images

Manoj 24/02/2016 in  Engineering Diploma Tuition

Shiva replied | 28/06/2016

5000

D

Dibyendu replied | 30/07/2016

Please mention tution fee per month at Bangalore for a 2nd year diploma in computer Science Student.

You can add upto 6 Images

A

Amandeep 23/02/2016 in  Engineering Diploma Tuition

CFA Academy replied | 26/02/2016

A variable speed drive controls motor speed and torque by varying the motor input voltage and frequency. A very close match between motor speed and the output requirements of the machine it is driving may therefore be achieved.

Variable Speed drives offer the user a number of advantages including:

Energy savings
Elimination of expensive mechanical drive...  more»
A variable speed drive controls motor speed and torque by varying the motor input voltage and frequency. A very close match between motor speed and the output requirements of the machine it is driving may therefore be achieved.

Variable Speed drives offer the user a number of advantages including:

Energy savings
Elimination of expensive mechanical drive components
Increased motor longevity
Reduced power line disturbances
Reduced risk of motor damage during start up and stop «less

Vamshi replied | 27/02/2016

A variable speed drive controls motor speed and torque by varying the motor input voltage and frequency. A very close match between motor speed and the output requirements of the machine it is driving may therefore be achieved.

Variable Speed drives offer the user a number of advantages including:

Energy savings
Elimination of expensive mechanical drive...  more»
A variable speed drive controls motor speed and torque by varying the motor input voltage and frequency. A very close match between motor speed and the output requirements of the machine it is driving may therefore be achieved.

Variable Speed drives offer the user a number of advantages including:

Energy savings
Elimination of expensive mechanical drive components
Increased motor longevity
Reduced power line disturbances
Reduced risk of motor damage during start up and stop

Need proper installation hence most of the advantages shall be compromised
Proper Maintenance is required «less

You can add upto 6 Images

R

Ramesh 05/02/2016 in  Engineering Diploma Tuition

Rajesh replied | 01/06/2016

Keep on updating your profile..

SMART FUTURE POINT replied | 27/06/2016

you can join smart future point for best career in teaching

You can add upto 6 Images

S

Satyabrata 03/02/2016 in  Engineering Diploma Tuition

N

New Manipal Learning Centre replied | 20/02/2016

Sandeep replied | 20/02/2016

FIRSTLY START TEACH & DISCUSSION WITH YOUR FRIENDS. IT WILL BUILD YOUR CONFIDENCE LEVEL. AFTER THIS YOU CAN CONTINUE TEACHING AT SCHOOL LEVEL & HIGHER LEVEL. GET CONTACTED WITH STUDENTS WHO ARE LOOKING FOR TUTION.

You can add upto 6 Images

K

Kalyan 02/02/2016 in  Engineering Diploma Tuition

Shanmugam replied | 17/02/2016

May like to contact Nettur Technical Training Foundation (NTTF) for Tool Engineering course. Coimbatore, Dharwad, Gannavaram, Jamshedpur, Pune, Tellichery, Trivandrum, Tumkur, Gopalpur, Tuticorin, Pantnagar, Vellore and Malappuram.

Sandeep replied | 22/02/2016

join course / Diploma in Tool Designing & engineering.

You can add upto 6 Images

M

Maaz 23/12/2015 in  Engineering Diploma Tuition

Rajkumar replied | 05/02/2016

emission controlled device. but i didn't its performance

Shreekumar replied | 09/02/2016

Main formula to calculate efficiency is output/input but in this case we need to see output i.e actual quantity of air purified by catalytic converter & sample quantity difference.

You can add upto 6 Images

Chirag 19/12/2015 in  Engineering Diploma Tuition

Rajkumar replied | 05/02/2016

if offer is in avail me contact you

Suryakiran replied | 28/02/2016

i can help u out where do u stay

You can add upto 6 Images

### Have a Question?

Thousands of expert tutors are available to answer your question

### Looking for Engineering Diploma Tuition ?

Find best Engineering Diploma Tuition in your locality on UrbanPro.

FIND NOW

#### Do you offer Engineering Diploma Tuition ?

Create Free Profile Now »

Top Contributors

Sreekanth

Ranganath

Sandeep

Neel

Rajesh

Roop

G Ravi

Anurag

Er. Gauri Vishal Kirola