Vidyaranyapura, Bangalore, India - 560097.
2
Details verified of Sajag Poudel✕
Identity
Education
Know how UrbanPro verifies Tutor details
Identity is verified based on matching the details uploaded by the Tutor with government databases.
Nepali
English
Hindi
Vidyaranyapura, Bangalore, India - 560097
Education Verified
Phone Verified
Email Verified
Report this Profile
Is this listing inaccurate or duplicate? Any other problem?
Please tell us about the problem and we will fix it.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Class 11 Tuition
1
Board
State, ISC/ICSE, CBSE
ISC/ICSE Subjects taught
Mathematics, Physics
CBSE Subjects taught
Physics, Mathematics
Taught in School or College
No
State Syllabus Subjects taught
Mathematics, Electronics, Physics
Teaching Experience in detail in Class 11 Tuition
After the completion of my 12th, I was offered to teach a few subject to 11th and 12th students by a private institute. I even taught for entrance preparation classes. I continued for a few months, till I joined the college for engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Class 12 Tuition
1
Board
State, ISC/ICSE, CBSE
ISC/ICSE Subjects taught
Mathematics, Physics
CBSE Subjects taught
Physics, Mathematics
Taught in School or College
No
State Syllabus Subjects taught
Mathematics, Electronics, Physics
Teaching Experience in detail in Class 12 Tuition
After the completion of my 12th, I was offered to teach a few subject to 11th and 12th students by a private institute. I even taught for entrance preparation classes. I continued for a few months, till I joined the college for engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Autocad classes
1
Teaching Experience in detail in Autocad classes
I was in my 5th semester of Engineering when I started to teach AutoCAD to my juniors in my college. I used to teach them in weekends and holidays. I taught for almost a year. Though it was my first experience in teaching such a practical subject, it was not so hard because all the students were my juniors and we were known to each other since quite long. Each of my classes used to be 2-3 hrs long including 1hr of lecture (theory) followed by 1-2 hrs of practical demonstration and practice. While teaching AutoCAD, it used to teach them even SolidEdge since it was prescribed in the syllabus of university.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in BTech Tuition
2
BTech Branch
BTech Mechanical Engineering
Type of class
Crash Course, Regular Classes
Class strength catered to
Group Classes, One on one/ Private Tutions
Taught in School or College
No
Teaching Experience in detail in BTech Tuition
I was in my 3rd semester of engineering and under the special request of some of the students of 1st semester, I started Tuition classes for Computer Aided Engineering Drawings subject. Later I also taught mechanics of materials, Basic & Applied Thermodynamics, Fluid Mechanics, Heat Transfer, Turbo Machines and Machine Design during last 3 years. Most of the time, I used to teach to the juniors of my college and sometimes, some other college students of my locality also joined them. It was really an exciting experience I have gone through. By now, I believe that those classes not only helped my students (juniors) but also inspired and encouraged me to go in deep and through knowledge of subjects of engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Engineering Diploma Branch
Automobile Engineering Diploma, Mechanical Engineering Diploma
Mechanical Engineering Diploma Subject
Measurements & Control, Mechanical Engineering Materials, Production Technology, Industrial Fluid Power, Metrology & Quality Control, Strength of Materials, Design of Machine Elements, Power Engineering, Mechanical Engineering Drawing, Manufacturing Technology, Alternate Energy Sources & Management, Fluid Mechanics and Machinery, Theory of Machines & Mechanisms, Automobile Engineering, Applied Mathematics, Material Handling Systems, Production Processes, CAD-CAM & Automation, Mechatronics, Thermal Engineering, Refrigeration & AirConditioning
Automobile Engineering Diploma Subject
Mechanical Engineering Drawing, Automibile Engines, Automobile Transmission Systems, Strength of Materials, Applied Math, Theory of Machines & Mechanisms, CAD-CAM and Automation, Automobile Manufacturing Processes, Heat Power Engineering, Vehicle aerodynamics and Design, Mechantronics, Automobile Systems, Materials and Manufacturing Process, Hydraulics and Pnumatics
Type of class
Crash Course, Regular Classes
Class strength catered to
Group Classes, One on one/ Private Tutions
Taught in School or College
No
Teaching Experience in detail in Engineering Diploma Tuition
I have never got an opportunity to guide the students of Engineering Diploma. But my experience and exposure in guiding the students of engineering (BE) as well as XI and XII would definitely help me for this purpose as well.
1. Which school boards of Class 12 do you teach for?
State, ISC/ICSE, CBSE
2. Have you ever taught in any School or College?
No
3. Which classes do you teach?
I teach Autocad, BTech Tuition, Class 11 Tuition, Class 12 Tuition and Engineering Diploma Tuition Classes.
4. Do you provide a demo class?
Yes, I provide a free demo class.
5. How many years of experience do you have?
I have been teaching for 1 year.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Class 11 Tuition
1
Board
State, ISC/ICSE, CBSE
ISC/ICSE Subjects taught
Mathematics, Physics
CBSE Subjects taught
Physics, Mathematics
Taught in School or College
No
State Syllabus Subjects taught
Mathematics, Electronics, Physics
Teaching Experience in detail in Class 11 Tuition
After the completion of my 12th, I was offered to teach a few subject to 11th and 12th students by a private institute. I even taught for entrance preparation classes. I continued for a few months, till I joined the college for engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Class 12 Tuition
1
Board
State, ISC/ICSE, CBSE
ISC/ICSE Subjects taught
Mathematics, Physics
CBSE Subjects taught
Physics, Mathematics
Taught in School or College
No
State Syllabus Subjects taught
Mathematics, Electronics, Physics
Teaching Experience in detail in Class 12 Tuition
After the completion of my 12th, I was offered to teach a few subject to 11th and 12th students by a private institute. I even taught for entrance preparation classes. I continued for a few months, till I joined the college for engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in Autocad classes
1
Teaching Experience in detail in Autocad classes
I was in my 5th semester of Engineering when I started to teach AutoCAD to my juniors in my college. I used to teach them in weekends and holidays. I taught for almost a year. Though it was my first experience in teaching such a practical subject, it was not so hard because all the students were my juniors and we were known to each other since quite long. Each of my classes used to be 2-3 hrs long including 1hr of lecture (theory) followed by 1-2 hrs of practical demonstration and practice. While teaching AutoCAD, it used to teach them even SolidEdge since it was prescribed in the syllabus of university.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Years of Experience in BTech Tuition
2
BTech Branch
BTech Mechanical Engineering
Type of class
Crash Course, Regular Classes
Class strength catered to
Group Classes, One on one/ Private Tutions
Taught in School or College
No
Teaching Experience in detail in BTech Tuition
I was in my 3rd semester of engineering and under the special request of some of the students of 1st semester, I started Tuition classes for Computer Aided Engineering Drawings subject. Later I also taught mechanics of materials, Basic & Applied Thermodynamics, Fluid Mechanics, Heat Transfer, Turbo Machines and Machine Design during last 3 years. Most of the time, I used to teach to the juniors of my college and sometimes, some other college students of my locality also joined them. It was really an exciting experience I have gone through. By now, I believe that those classes not only helped my students (juniors) but also inspired and encouraged me to go in deep and through knowledge of subjects of engineering.
1 Student Class Location
Online (video chat via skype, google hangout etc)
Student's Home
Tutor's Home
Engineering Diploma Branch
Automobile Engineering Diploma, Mechanical Engineering Diploma
Mechanical Engineering Diploma Subject
Measurements & Control, Mechanical Engineering Materials, Production Technology, Industrial Fluid Power, Metrology & Quality Control, Strength of Materials, Design of Machine Elements, Power Engineering, Mechanical Engineering Drawing, Manufacturing Technology, Alternate Energy Sources & Management, Fluid Mechanics and Machinery, Theory of Machines & Mechanisms, Automobile Engineering, Applied Mathematics, Material Handling Systems, Production Processes, CAD-CAM & Automation, Mechatronics, Thermal Engineering, Refrigeration & AirConditioning
Automobile Engineering Diploma Subject
Mechanical Engineering Drawing, Automibile Engines, Automobile Transmission Systems, Strength of Materials, Applied Math, Theory of Machines & Mechanisms, CAD-CAM and Automation, Automobile Manufacturing Processes, Heat Power Engineering, Vehicle aerodynamics and Design, Mechantronics, Automobile Systems, Materials and Manufacturing Process, Hydraulics and Pnumatics
Type of class
Crash Course, Regular Classes
Class strength catered to
Group Classes, One on one/ Private Tutions
Taught in School or College
No
Teaching Experience in detail in Engineering Diploma Tuition
I have never got an opportunity to guide the students of Engineering Diploma. But my experience and exposure in guiding the students of engineering (BE) as well as XI and XII would definitely help me for this purpose as well.
Want to learn from Sajag Poudel?
Post your Learning Need
Let us shortlist and give the best tutors and institutes.
or
Send Enquiry to Sajag Poudel
Let Sajag Poudel know you are interested in their class
Reply to 's review
Enter your reply*
Your reply has been successfully submitted.
