UrbanPro
true

Learn Advanced Placement Tests Coaching from the Best Tutors

  • Affordable fees
  • 1-1 or Group class
  • Flexible Timings
  • Verified Tutors

Current Electricity

Gurukul
23/04/2017 0 0

Current Electricity:

Electric Current (I):- The rate of flow of charge through any cross-section of a wire is called electric current flowing through it.

Electric current (I) = q / t. Its SI unit is ampere (A).

The conventional direction of electric current is the direction of motion of positive charge.

The current is the same for all cross-sections of a conductor of non-uniform cross-section. Similar to the

Water flow, charge flows faster where the conductor is smaller in cross-section and slower where the conductor is larger in cross-section, so that charge rate remains unchanged.

If a charge q revolves in a circle with frequency f, the equivalent current, i = qf

(In a metallic conductor current flows due to motion of free electrons while in electrolytes and ionized gases current flows due to electrons and positive ions.)

Types of Electric Current:-

According to its magnitude and direction electric current is of two types

Direct Current (DC) Its magnitude and direction do not change with time. A ceil, battery or DC dynamo are the sources of direct current.

Alternating Current (AC) An electric current whose magnitude changes continuously and changes its direction periodically is called alternating current. AC dynamo is source of alternating current.

Current Density:- The electric current flowing per unit area of cross-section of conductor is called current density.

Current density (J) = I / A

Its S1 unit is ampere metre-2 and dimensional formula is [AT-2].

It is a vector quantity and its direction is in the direction of motion positive charge or in the direction of flow of current.

Thermal Velocity of Free Electrons:- Free electrons in a metal move randomly with a very high speed of the order of 105 ms-1. This speed is called thermal velocity of free electron.

Average thermal velocity of free electrons in any direction remains zero.

Drift Velocity of Free Electrons:- When a potential difference is applied across the ends of a conductor, the free electrons in it move with an average velocity opposite to direction of electric field. Which is called drift velocity of free electrons.

Drift velocity vd = eEτ / m = eVτ / ml

Where, τ = relaxation time, e = charge on electron,

E = electric field intensity, 1 = length of the conductor,

V = potential difference across the ends of the conductor, m = mass of electron.

Relation between electric current and drift velocity is given by vd = I / An e

Mobility:-

The drift velocity of electron per unit electric field applied is mobility of electron. Mobility of electron (μ) = vd / E

Its SI unit is m2s-1V-1 and its dimensional formula is [M-1T2A].

Ohm’s Law:- If physical conditions of a conductor such as temperature remains unchanged, then the electric current (I) flowing through the conductor is directly proportional to the potential difference (V) applied across its ends.

I ∝ V or V = IR

Where R is the electrical resistance of the conductor and R = Ane2 τ / ml.

Electrical Resistance:- The obstruction offered by any conductor in the path of flow of current is called its electrical resistance.

Electrical resistance, R = V / I

Its SI unit is ohm (Ω) and its dimensional formula is [ML2T-3A-2].

Electrical resistance of a conductor R = ρ l / A

Where, l = length of the conductor, A = cross-section area and, ρ = resistivity of the material of the conductor.

Resistivity:- Resistivity of a material of a conductor is given by

ρ = m / n2 τ

Where, n = number of free electrons per unit volume.

Resistivity of a material depend on temperature and nature of the material.

It is independent of dimensions of the conductor, i.e., length, area of cross-section etc.

Resistivity of metals increases with increase in temperature as

ρ t = ρ o (1 + αt)

where ρ o and ρ t are resistivity of metals at O°C and t°C and α temperature coefficient of resistivity of the material.

For metals α is positive, for some alloys like nichrome, manganin and constantan, α is positive but very low.

For semiconductors and insulators. α is negative.

Resistivity is low for metals, more for semiconductors and very high alloys like nichrome, constantan etc. (In magnetic field the resistivity of metals increases. But resistivity of ferromagnetic materials such as iron, nickel, cobalt etc decreases in magnetic field.

Electrical Conductivity:- The reciprocal of resistivity is called electrical conductivity. Electrical conductivity (σ) = 1 / ρ = 1 / RA = ne2 τ / m

Its SI units is ohm-1 m-1 or mho m-1 or siemen m-1.

Relation between current density (J) and electrical conductivity (σ) is given by J = σ E

where, E = electric field intensity.

Ohmic Conductors:- Those conductors which obey Ohm’s law, are called ohmic conductors e.g., all metallic conductors are ohmic conductor.

For ohmic conductors V – I graph is a straight line.

Non-ohmic Conductors:- Those conductors which do not obey Ohm’s law, are called non-ohmic conductors. e.g., diode valve, triode valve, transistor , vacuum tubes etc.

For non-ohmic conductors V – I graph is not a straight line.

Superconductors:- When few metals are cooled, then below a certain critical temperature their electrical resistance suddenly becomes zero. In this state, these substances are called superconductors and this phenomena is called superconductivity.

Mercury become superconductor at 4.2 K, lead at 7.25 K and niobium at 9.2 K

Colour Coding of Carbon Resistors:- The resistance of a carbon resistor can be calculated by the code given on it in the form of coloured strips.

This colour coding can be easily learned in the sequence “B B ROY Great Bratain Very Good Wife”.

Combination of Resistors:

1. In Series: 

Equivalent resistance, R = R1 + R2 + R3

Current through each resistor is same.

Sum of potential differences across individual resistors is equal to the potential difference, applied by

Source.

2. In Parallel:

Equivalent resistance: 1 / R = 1 /R1 + 1 / R2 + 1 / R3

Potential difference across each resistor is same.

Sum of electric currents flowing through individual resistors is equal to the be electric current drawn from the source.

Electric Cell:- An electric cell is a device which converts chemical energy into electrical energy.

Electric cells are of two types.

Primary Cells- Primary cells cannot be charged again. Voltic, Daniel and Leclanche cells are primary cells.

Secondary Cells- Secondary cells can be charged again and again. Acid and alkali accumulators are secondary cells.

Electro – motive – Force (emf) of a Cell:- The energy given by a cell in flowing unit positive charge throughout the circuit completely one time, is equal to the emf of a cell.

Emf of a cell (E) = W / q.

Its SI unit is volt.

Terminal Potential Difference of a Cell:- The energy given by a cell in flowing unit positive charge through till outer circuit one time from one terminal of the cell to the other terminal of the cell. Terminal potential difference (V) = W / q. Its SI unit is volt.

Internal Resistance of a Cell:- The obstruction offered by the electrolyte of a cell in the path of electric current is called internal resistance (r) of the cell. Internal resistance of a cell Increases with increase in concentration of the electrolyte. Increases with increase in distance between the electrodes.Decreases with increase in area of electrodes dipped in electrolyte.

Relation between E. V and r

E = V + Ir

r = (E / V – 1) R

If cell is in charging state, then E = V – Ir

Grouping of Cells:-  In Series If n cells, each of emf E and internal resistance r are connected in series to a resistance R. then equivalent emf.

E eq = E1 + E2 + …. + En = nE

Equivalent internal resistance r eq = r1 + r2 + …. + rn = nr

Current In the circuit I = E eq / (R + r eq) = n E / (R + nr)

In Parallel If n cells. each of emf E and internal resistance r are connected to in parallel. then equivalent emf.

 Eeq = E

Equivalent internal resistance

1 / r eq = 1 / r1 + 1 / r1 + … + 1 / rn = n / r or r eq = r / n

Current In the circuit I = E / (R + r / n)

Mixed Grouping of Cells:-  If n cells, each of emf E and internal resistance r are connected in series and such m rows are connected in parallel, then

Equivalent emf, E eq

Equivalent Internal resistance- r eq

Current in the circuit, I = -n E / (R + nr / m) or I = m n E / m R + nr.

Note- Current in this circuit will be maximum when external resistance is equal to the equivalent internal resistance, i.e.,

R = nr / m ⇒ mR = nr.

Kirchhoff’s Laws:- There are two Kirchhoff’s laws for solving complicated electrical circuits.

Junction Rule The algebraic sum of all currents meeting at a junction in a closed circuit is zero, i.e.,

 Σ I = O.

This law follows law of conservation of charge.

Loop Rule The algebraic sum of all the potential differences in any closed circuit is zero, i.e.,

ΣV = 0 ⇒ ΣE = ΣIR

This law follows law of conservation of energy.

Balanced Wheatstone Bridge:- Wheatstone bridge is also known as a meter bridge or slide wire bridge.

This is an arrangement of four resistance in which one resistance is unknown and rest known. The Wheatstone bridge as shown in figure. The bridge is said to be balanced when deflection in galvanometer is zero, i.e., I g = O.

P / Q = R / S

The value of unknown resistance S can found. as we know the value of P,Q and R. It may be remembered that the bridge is most sensitive, when all the four resistances are of the same order.

Meter Bridge:- This is the simplest form of Wheatstone bridge and is especially useful for comparing resistance more accurately.

R / S = l1 / (100 – l1)

Where l1 is the length of wire from one end where null point is obtained.

If R be the total resistance of potentiometer wire L its total length, then potential gradient, i.e., fall in potential per unit length along the potentiometer will be

K = V / L = IR / L

= Eo R / (Ro + R)L

where, E o = emf of battery and Ro = resistance inserted by means of rheostat Rh.

Determination of emf of a Cell using Potentiometer:- If with a cell of emf E on sliding the contact point we obtain zero deflection in galvanometer G when contact point is at J at a length I from the end where positive terminal of cell have been joined. Then fall in potential along length i is just balancing the emf of cell. Thus, we have

E = Kl or E1 / E2 = l1 / l2

Determination of Internal Resistance of a Cell using Potentiometer:- The arrangement is shown in figure. If the cell E is in open circuit and balancing length l1, then E = Kl1

But if by inserting key K2 circuit of cell is closed, then ooten difference V is balanced by a length l2 of potential where

V = Kl2

Internal resistance of cell:- r = E – V / V , R = l1 – l2 / l2 * R

Important Points:- Potentiometer is an ideal voltmeter.

Sensitivity of potentiometer is increased by increasing length of potentiometer wire.

If n identical resistances are first connected in series and then in parallel. the ratio of the equivalent resistance.

Rs / Rp= n2 / 1.

If a skeleton cube is made with 12 equal resistance, each having a resistance R, then the net resistance across

The diagonal of cube = 5 / 6 R

The diagonal of a face = 3 / 4 R

Along a side = 7 / 12 R

If a resistance wire is stretched to a greater length, keeping volume constant, then

R ∝ l2 ⇒ R1 / R2 = (l1 / l2)2

R ∝ 1/r4 ⇒ R1 / R2 = (r2 / r1)4

Where l is the length and r is the radius of wire.

0 Dislike
Follow 0

Please Enter a comment

Submit

Other Lessons for You

Newton First Law of Motion
The First law of motion of Newton give us powerful tools to analyze forces and solve problems. First Law : Statement If a body has a number of forces F1,F2, F3 ...Fn acting on it it will remain...
T

Thimiri Rajmanohar

0 0
0

Improve Your Writing
Acommand of grammar and basic language skills in writing can produce crisp, concise written communications. Your coworkers may appreciate memos that offer clear explanation or instructions, and your customers...

What Is A Raag?
Raag is the backbone of Indian Classical Music. The word raag comes from Sanskrit word "Ranj" which means to delight, to make happy and to satisfy. Here it's necessary to clarify that not all raags project...
A

Spoken English Tips !
The following tips may help you to improve your spoken English and overcome the hesitation in the English language. Don’t worry about making mistakes because you will make mistakes as a learner. Be...

TOEIC Test : Listening & Reading Test Format
The TOEIC L&R is a paper-and-pencil, multiple-choice assessment. There are two separately timed sections of 100 questions each. Section I : ListeningExaminees listen to a variety of questions and...
X

Looking for Advanced Placement Tests Coaching Classes?

The best tutors for Advanced Placement Tests Coaching Classes are on UrbanPro

  • Select the best Tutor
  • Book & Attend a Free Demo
  • Pay and start Learning

Learn Advanced Placement Tests Coaching with the Best Tutors

The best Tutors for Advanced Placement Tests Coaching Classes are on UrbanPro

This website uses cookies

We use cookies to improve user experience. Choose what cookies you allow us to use. You can read more about our Cookie Policy in our Privacy Policy

Accept All
Decline All

UrbanPro.com is India's largest network of most trusted tutors and institutes. Over 55 lakh students rely on UrbanPro.com, to fulfill their learning requirements across 1,000+ categories. Using UrbanPro.com, parents, and students can compare multiple Tutors and Institutes and choose the one that best suits their requirements. More than 7.5 lakh verified Tutors and Institutes are helping millions of students every day and growing their tutoring business on UrbanPro.com. Whether you are looking for a tutor to learn mathematics, a German language trainer to brush up your German language skills or an institute to upgrade your IT skills, we have got the best selection of Tutors and Training Institutes for you. Read more